PLAINFIELD, IL —
OSHA Inspection: CRUZ RESTORATION MIDWEST INC
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of CRUZ RESTORATION MIDWEST INC in 5313 LINDENWOOD CIRCLE, PLAINFIELD, IL 60586 (NAICS 238160). OSHA activity number 344052535.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- CRUZ RESTORATION MIDWEST INC
- Site address
- 5313 LINDENWOOD CIRCLE
- City
- PLAINFIELD
- State
- IL
- ZIP
- 60586
- Mailing
- 609 WESTGATE TERRACE, STREAMWOOD, IL 60107
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238160
- Employees
- 3
- Ownership type
- A
Citations
5 citations on file for this inspection.
1903.19 C01
- Issued
- Mar 31, 2020
- Abate by
- May 15, 2020
- Penalty
- Initial $325 · Current $325
General-duty citation text
29 CFR 1903.19(c)(1): Within 10 calendar days after the abatement date, the employer did not certify to OSHA (the Agency) that each cited violation has been abated, except as provided in paragraph (c)(2) of this section. a. On or about March 30, 2020 - the employer did not certify to OSHA within 10 days after the abatement date that each of the following cited violations issued had been corrected: Citation Number Item Number Abatement Date 02 001 09/17/2019
Recent events (1)
- — Z (O) $325
1926.102 A01
- Issued
- Jul 31, 2019
- Penalty
- Initial $1,705 · Current $1,705
General-duty citation text
29 CFR 1926.102(a)(1): Employees were not provided with eye and face protection equipment when machines or operations presented potential eye or face injury from physical, chemical, or radiation agents: a. On or about June 3, 2019, at the above addressed jobsite, an employee using a pneumatic nail gun did not wear safety glasses, thereby exposing the employee to the hazards associated with eye injuries. b. On or about June 3, 2019, at the above addressed jobsite, an employee using a battery-operated, portable radial saw did not wear safety glasses, thereby exposing the employee to the hazards associated with eye injuries.
Recent events (1)
- — Z (S) $1705
1926.501 B13
- Issued
- Jul 31, 2019
- Penalty
- Initial $3,978 · Current $3,978
General-duty citation text
29 CFR 1926.501(b)(13): Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501 (b): a. On or about June 3, 2019, at the above addressed jobsite, employees performing residential roofing operations, eighteen (18') feet eight (8") inches above the ground, were not protected from falls, thereby exposing employees to fall hazards.
Recent events (1)
- — Z (S) $3978
1926.1053 B22
- Issued
- Jul 31, 2019
- Abate by
- Aug 6, 2019
- Penalty
- Initial $3,978 · Current $3,978
General-duty citation text
29 CFR 1926.1053(b)(22): Employees using ladders were carrying objects or loads that could cause the employee to lose balance and fall: a. On or about June 3, 2019, at the above addressed jobsite, an employee was carrying roofing material up the ladder, thereby exposing the employee to hazards associated with falls.
Recent events (1)
- — Z (S) $3978
1926.503 B01
- Issued
- Jul 31, 2019
- Abate by
- Sep 17, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.503(b)(1): The employer did not verify compliance with paragraph (a) of this section by preparing a written (training) certification record including the name or other identity of the employee trained, the date(s) of the training, and the signature of the person who conducted the training or the signature of the employer. a. On or about June 3, 2019, at the above addressed jobsite, employees had been provided fall protection training, however, the employer failed to keep a written certification of record.
Recent events (1)
- — Z (O) $0
More inspections in this industry (NAICS 238160)
More inspections in IL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344052535.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.