OSHA Inspection: BUNTING GRAPHICS, INC.

Issued

2019-07-01 00:00:00

Penalty

Initial $5636.00 · Current $2852.00 Reduced

General-duty citation text

29 CFR 1926.100(a): Employees working in areas where there is a possible danger of head injury from impact, or from falling or flying objects, or from electrical shock and burns, were not protected by protective helmets:  a. On June 5, 2019, two employees working at the base of the building, below employees working above them, were not wearing hard hats, exposed to an overhead hazard.

Issued

2019-07-01 00:00:00

Penalty

Initial $9282.00 · Current $4674.00 Reduced

General-duty citation text

29 CFR 1926.453(b)(2)(v): A body belt was not worn and a lanyard attached to the boom or basket when working from an aerial lift:   a. On June 5, 2019, inside the atrium of the structure an employee working in an aerial lift about 40 feet above the ground was not wearing a harness, exposing himself to a 40 feet fall hazard.

Issued

2019-07-01 00:00:00

Penalty

Initial $9282.00 · Current $4674.00 Reduced

General-duty citation text

29 CFR 1926.760(a)(1): Except as provided by paragraph (a)(3) of this section, each employee engaged in a steel erection activity who is on a walking/working surface with an unprotected side or edge more than 15 feet (4.6 m) above a lower level was not protected from fall hazards by guardrail systems, safety net systems, personal fall arrest systems, positioning device systems or fall restraint systems:   a. On June 5, 2019, on the 6:12 pitch roof, two employees installing metal framing and brass panels were not adequately protected from a fall hazard that ranged from 9 feet to 80 feet in that they did not attach their harnesses to the rope and anchor system.  b. On June 5, 2019, on the lower flat roof, employees approached an unprotected edge to access material storage, exposing themselves to a 50 feet fall hazard.