TULSA, OK —
OSHA Inspection: AIRCRAFT CYLINDERS OF AMERICA
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of AIRCRAFT CYLINDERS OF AMERICA in 1006 EAST INDEPENDENCE, TULSA, OK 74106 (NAICS 336413). OSHA activity number 344059316.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- AIRCRAFT CYLINDERS OF AMERICA
- Site address
- 1006 EAST INDEPENDENCE
- City
- TULSA
- State
- OK
- ZIP
- 74106
- Mailing
- 1006 EAST INDEPENDENCE, TULSA, OK 74106
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 336413
- Employees
- 20
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.215 A04
- Issued
- Sep 3, 2019
- Abate by
- Sep 11, 2019
- Penalty
- Initial $1,932 · Current $1,159 Reduced
General-duty citation text
29 CFR 1910.215(a)(4): Work rest(s) on grinding machinery were not adjusted closely to the wheel with a maximum opening of one eighth inch: On or about June 4, 2019, and at times prior thereto, in the maintenance shop area, the employer did not ensure that the opening, between the work rest and the wheel of an abrasive wheel grinding machine, was one-eight inch or less. This exposed employees to struck-by hazards.
Recent events (2)
- — I (S) $1159.2
- — Z (S) $1932
1910.215 B09
- Issued
- Sep 3, 2019
- Abate by
- Sep 11, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch: On or about June 4, 2019, and at times prior thereto, in the maintenance shop area, the employer did not ensure that the distance between the tongue guard and the wheel, of an abrasive wheel grinding machine, was less than one-fourth inch. This exposed employees to struck-by hazards.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.215 D03
- Issued
- Sep 3, 2019
- Abate by
- Sep 25, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.215(d)(3): The contact surface(s) of wheel(s), blotter(s) or flange(s) on grinding machine(s) were not flat and free or foreign matter: On or about June 4, 2019, and at times prior thereto, in the maintenance shop area, the employer did not ensure that the contact surface on the wheels, of an abrasive wheel grinding machine, were not worn and uneven. This exposed employees to struck-by hazards.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.219 D01
- Issued
- Sep 3, 2019
- Abate by
- Sep 11, 2019
- Penalty
- Initial $3,221 · Current $1,933 Reduced
General-duty citation text
29 CFR 1910.219(d)(1): Pulley(s) with part(s) seven feet or less from the floor or work platform were not guarded in accordance with the requirements specified in 29 CFR 1910.219(m) and (o): On or about June 4, 2019, and at times prior thereto, in the plating shop area, the employer did not ensure that the belt and pulley motor of a fan located approximately three(3) feet from the floor was guarded to prevent contact. Employees working in this area were exposed to caught in hazards.
Recent events (2)
- — I (S) $1932.6
- — Z (S) $3221
1910.242 B
- Issued
- Sep 3, 2019
- Abate by
- Sep 25, 2019
- Penalty
- Initial $1,932 · Current $1,159 Reduced
General-duty citation text
29 CFR 1910.242(b): Compressed air used for cleaning purposes was not reduced to less than 30 p.s.i.: On or about June 4, 2019, and at times prior thereto, in the shipping/receiving area, the employer did not ensure that the compressed air nozzle, used by employees to clean, reduced the pressure below 30 p.s.i. This exposed the employees to struck by hazards.
Recent events (2)
- — I (S) $1159.2
- — Z (S) $1932
More inspections at Aircraft Cylinders of America
View Aircraft Cylinders of America's full OSHA safety record →
More inspections in this industry (NAICS 336413)
More inspections in OK
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344059316.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.