Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: HI-TECH CONSTRUCTION, LLC

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of HI-TECH CONSTRUCTION, LLC in 827 SUMMERLIN CIRCLE LOT 30 SUMMERLIN, AUBURN, AL 36830 (NAICS 238130). OSHA activity number 344071345.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Hi-Tech Construction, LLC — free Get an email when a new federal OSHA severe-injury report for Hi-Tech Construction, LLC is published. One employer, no account, unsubscribe in one click.
Site address
827 SUMMERLIN CIRCLE LOT 30 SUMMERLIN
City
AUBURN
State
AL
ZIP
36830
Mailing
101 VETERANS PARKWAY LOT 154, OPELIKA, AL 36801
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238130
Employees
7
Ownership type
A

4 citations on file for this inspection.

1926.102 A01

Serious Gravity 5 1 instance 7 exposed
Issued
Jun 17, 2019
Abate by
Jun 27, 2019
Penalty
Initial $3,410 · Current $3,410
29 CFR 1926.102(a)(1): Eye and face protective equipment were not used when machines or operations presented potential eye or face injury from physical agents:  a)  At 827 Summerlin Circle, Lot 30 Summerlin, Auburn, Alabama:  On or about June 11, 2019 and at times prior; the employer allowed his employees to operate pneumatic nail guns without eye protection while performing framing activities exposing his employees to struck-by hazards..
Recent events (1)
  • — Z (S) $3410

1926.451 B02

Serious Gravity 5 1 instance 2 exposed
Issued
Jun 17, 2019
Abate by
Jun 27, 2019
Penalty
Initial $2,842 · Current $2,842
29 CFR 1926.451(b)(2): Except as provided in paragraphs (b)(2)(i) and (b)(2)(ii) of this section, each scaffold platform and/or walkway was not at least 18 inches (46 cm) wide:  a)  At 827 Summerlin Circle, Lot 30 Summerlin, Rear of House, Auburn, Alabama:  On or about June 11, 2019 and at times prior; the employer allowed his employees to perform framing activities from a job made scaffold with a work platform that measures 6 inches wide exposing his employees to a fall hazard of up to 16.5 feet to the concrete ground below.   a)  At 827 Summerlin Circle, Lot 30 Summerlin, Front of House, Auburn, Alabama:  On or about June 11, 2019 and at times prior; the employer allowed his employees to perform framing activities from a job made scaffold with a work platform that measures 8 inches wide exposing his employees to a fall hazard of up to 18.2 feet to the concrete ground below.
Recent events (1)
  • — Z (S) $2842

1926.451 G01

Serious Gravity 5 1 instance 2 exposed
Issued
Jun 17, 2019
Abate by
Jun 27, 2019
Penalty
Initial $0 · Current $0
29 CFR 1926.451(g)(1): Employees on scaffolds more than 10 feet (3.1 m) above a lower level were not protected from falling to that lower level by fall protection established in paragraphs (g)(1)(i)-(vii) of this section:  a)  At 827 Summerlin Circle, Lot 30 Summerlin, Auburn, Alabama:  On or about June 11, 2019 and at times prior; the employer allowed his employees to perform framing activities from a job made scaffold without fall protection exposing his employees to a fall hazard of up to 18.2 feet to the concrete ground below.
Recent events (1)
  • — Z (S) $0

1926.501 B13

Repeat Gravity 5 1 instance 7 exposed
Issued
Jun 17, 2019
Abate by
Jun 27, 2019
Penalty
Initial $6,820 · Current $6,820
29 CFR 1926.501(b)(13): Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501 (b):   a)  At 827 Summerlin Circle, Lot 30 Summerlin, Auburn, Alabama:  On or about June 11, 2019 and at times prior; the employer allowed his employees to perform framing activities without fall protection exposing his employees to a fall hazard of 11.5 feet to the concrete ground below.  THE HI-TECH CONSTRUCTION, LLC., WAS PREVIOUSLY CITED FOR A VIOLATION OF THIS OCCUPATIONAL SAFETY AND HEALTH STANDARD OR ITS EQUIVALENT STANDARD 29 CFR 1926.501(B)(13) WHICH WAS CONTAINED IN OSHA INSPECTION NUMBER 1252718, CITATION NUMBER 1, ITEM NUMBER 1, AND WAS AFFIRMED AS A FINAL ORDER ON JULY 20, 2018, WITH RESPECT TO A WORKPLACE LOCATED AT LOT 6 THE WATERS, PIKE ROAD, ALABAMA.
Recent events (1)
  • — Z (R) $6820

View Hi-Tech Construction, LLC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344071345.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.