Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: CREATIVE METAL PRODUCTS, INC.

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of CREATIVE METAL PRODUCTS, INC. in 2411 INDUSTRIAL DR, NEENAH, WI 54956 (NAICS 332322). OSHA activity number 344086889.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Creative Metal Products, INC. — free Get an email when a new federal OSHA severe-injury report for Creative Metal Products, INC. is published. One employer, no account, unsubscribe in one click.
Site address
2411 INDUSTRIAL DR
City
NEENAH
State
WI
ZIP
54956
Mailing
2411 INDUSTRIAL DR, NEENAH, WI 54956
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
332322
Employees
80
Ownership type
A

4 citations on file for this inspection.

1910.134 C02 II

Serious Gravity 1 1 instance 1 exposed
Issued
Aug 13, 2019
Abate by
Sep 18, 2019
Penalty
Initial $3,381 · Current $2,367 Reduced
29 CFR 1910.134(c)(2)(ii): The employer did not establish and implement those elements of a written program necessary to ensure that any employee using a respirator voluntarily was medically able to use that respirator, and that the respirator was cleaned, stored, and maintained so that its use does not present a health hazard to the user:  a)    On or about 6/18/2019, Employee had been provided on a voluntary basis with and used as needed a tight fitting half mask respirator for use while welding. The employer had not  determined if the employee was medically able to use the respirator.
Recent events (2)
  • — I (S) $2366.7
  • — Z (S) $3381

1910.134 F02

Serious Gravity 1 1 instance 1 exposed
Issued
Aug 13, 2019
Abate by
Sep 18, 2019
Penalty
Initial $0 · Current $0
29 CFR 1910.134(f)(2): Employee(s) using tight-fitting facepiece respirators were not fit tested prior to initial use of the respirator:   a)    On or about 6/18/2019, Employee had been provided on a voluntary basis with and used as needed a tight fitting half mask respirator for use while welding. The employer had not  fit tested the employee prior to the initial use of the respirator.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.252 C03 II

Serious Gravity 1 2 instances 8 exposed
Issued
Aug 13, 2019
Abate by
Sep 18, 2019
Penalty
Initial $3,381 · Current $2,367 Reduced
29 CFR 1910.252(c)(3)(ii): Fixed enclosure. A fixed enclosure with a top and not less than two sides which surround the welding or cutting operations and with a rate of airflow sufficient to maintain a velocity away from the welder of not less than 100 linear feet (30 m) per minute.  a)    On or about 6/27/2019, Local exhaust readings were taken in the welding booth with the Torit Downflo filter system used primarily for welding galvanized metal. Readings on that date indicated a flow rate away from the welder of approximately 20 linear feet per minute which is 80% below what the standard calls for. Readings in the high bay welding area were the same.
Recent events (2)
  • — I (S) $2366.7
  • — Z (S) $3381

1910.334 A03 I

Serious Gravity 5 6 instances 4 exposed
Issued
Aug 13, 2019
Penalty
Initial $4,508 · Current $3,156 Reduced
29 CFR 1910.334(a)(3)(i): A flexible cord used with grounding type equipment did not contain an equipment grounding conductor:  a)    On or about 6/18/2019, Flexible extension cords and/ or fans were missing ground pins for the plugs in the grind booth and Weld department.
Recent events (2)
  • — I (S) $3155.6
  • — Z (S) $4508

View Creative Metal Products, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344086889.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.