Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: CROSS COUNTRY MANUFACTURING, INC.

Planned inspection · Health discipline

On , OSHA opened a planned health inspection of CROSS COUNTRY MANUFACTURING, INC. in 2355 STATE HIGHWAY 206, GREENE, NY 13778 (NAICS 336212). OSHA activity number 344094453.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Cross Country Manufacturing, INC. — free Get an email when a new federal OSHA severe-injury report for Cross Country Manufacturing, INC. is published. One employer, no account, unsubscribe in one click.
Site address
2355 STATE HIGHWAY 206
City
GREENE
State
NY
ZIP
13778
Mailing
2355 STATE HIGHWAY 206, GREENE, NY 13778
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Health
Advance notice
No
Union status
B
Opened
Case closed
Last modified
Data loaded
NAICS code
336212
Employees
15
Ownership type
A

4 citations on file for this inspection.

1910.134 E01

Serious Gravity 1 1 instance 2 exposed
Issued
Jul 10, 2019
Penalty
Initial $1,932 · Current $1,449 Reduced
29 CFR 1910.134(e)(1): The employer did not provide a medical evaluation to determine the employees ability to use a respirator, before the employee was fit tested or required to use the respirator in the workplace:    a) Spray Booth Area, on or about 6/19/19: Employees wear 3M half face air purifying respirators and had not been provided with a medical evaluation.
Recent events (2)
  • — I (S) $1449
  • — Z (S) $1932

1910.134 F02

Serious Gravity 1 1 instance 2 exposed
Issued
Jul 10, 2019
Penalty
Initial $0 · Current $0
29 CFR 1910.134(f)(2): Employer did not ensure that an employee using a tight fitting facepiece respirator was fit tested prior to initial use of the respirator, whenever a different respirator facepiece (size, style, model or make) was used, and at least annually thereafter:   a) Spray Booth Area, on or about 6/19/19: Employees required to wear 3M half face air purifying respirators had not been fit tested.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.147 C04 I

Serious Gravity 5 1 instance 4 exposed
Issued
Jul 10, 2019
Abate by
Jul 30, 2019
Penalty
Initial $3,789 · Current $2,842 Reduced
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section:   a)  Large Shop, on or about 6/26/19: Specific procedures were not developed or written for employees who perform servicing and/or maintenance on various machinery or equipment including but not limited to: Lodge & Shipley Shear.
Recent events (2)
  • — I (S) $2841.75
  • — Z (S) $3789

1910.212 A01

Serious Gravity 1 2 instances 4 exposed
Issued
Jul 10, 2019
Penalty
Initial $2,273 · Current $1,705 Reduced
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created point of operation, rotating parts, and flying chips:  a)  Large Shop, Drill Press Area, on or about 6/26/19: Two Clausing Drill Presses were not provided with a chuck and tool guard.  b) Small Shop, Drill Press Area, on or about 6/26/19: Walker Turner Drill Press was not provided with a chuck and tool guard.  c) Small Shop, Drill Press Area, on or about 6/26/19: Two Power Matics Drill Presses were not provided with a chuck and tool guard.
Recent events (2)
  • — I (S) $1704.75
  • — Z (S) $2273

View Cross Country Manufacturing, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344094453.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.