SEDALIA, CO —
OSHA Inspection: FRONT RANGE TIRE LLC
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of FRONT RANGE TIRE LLC in 5765 PETERSON RD, SEDALIA, CO 80135 (NAICS 562920). OSHA activity number 344094842.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- FRONT RANGE TIRE LLC
- Site address
- 5765 PETERSON RD
- City
- SEDALIA
- State
- CO
- ZIP
- 80135
- Mailing
- 5765 PETERSON RD, SEDALIA, CO 80135
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 562920
- Employees
- 19
- Ownership type
- A
Citations
9 citations on file for this inspection.
1910.28 B01 I
- Issued
- Dec 3, 2019
- Abate by
- Dec 13, 2019
- Penalty
- Initial $6,819 · Current $4,091 Reduced
General-duty citation text
29 CFR 1910.28(b)(1)(i): The employer did not ensure that each employee on a walking-working surface with an unprotected side or edge that is 4 feet (1.2m) or more above a lower level was protected from falling by guardrail systems, safety net system, or personal fall arrest system: a) On or about June 19, 2019, and at times prior, employees operating the tire shredders were exposed to fall hazards where the platform at the hopper was not equipped with guardrails or any other means of fall protection.
Recent events (2)
- — I (S) $4091
- — Z (S) $6819
1910.147 C04 I
- Issued
- Dec 3, 2019
- Abate by
- Dec 9, 2019
- Penalty
- Initial $6,819 · Current $4,091 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: a) On or about June 19, 2019, employees were exposed to amputation hazards when engaged in clearing a jam at the tire shredder without implementing Lockout/Tagout procedures during the process. The main power to the shredder remained on while the employees worked on the equipment.
Recent events (2)
- — I (S) $4091
- — Z (S) $6819
1910.212 A01
- Issued
- Dec 3, 2019
- Abate by
- Dec 13, 2019
- Penalty
- Initial $5,115 · Current $3,069 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: a) On or about June 19, 2019, and at times prior, employees were exposed to amputation hazards where no guard was in place at the auger conveyor for the paint plant.
Recent events (2)
- — I (S) $3069
- — Z (S) $5115
1910.219 F03
- Issued
- Dec 3, 2019
- Abate by
- Dec 13, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.219(f)(3): Sprocket wheels and chains which were seven (7) feet or less above floors or platforms were not enclosed: a) On or about June 19, 2019, and at times prior, employees in the crumb plant were exposed to amputation injuries where a chain and sprocket on the rear of the shredder was not enclosed.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.305 B02 I
- Issued
- Dec 3, 2019
- Abate by
- Dec 9, 2019
- Penalty
- Initial $5,115 · Current $2,749 Reduced
General-duty citation text
29 CFR 1910.305(b)(2)(i): Pull boxes, junction boxes, and fittings were not provided with covers approved for the purpose: a) On or about June 19, 2019, and at times prior, employees in the crumb plant were exposed to electrical hazards where a junction box positioned on the shredder did not have a cover in place.
Recent events (2)
- — I (O) $2749
- — Z (S) $5115
1910.23 B08
- Issued
- Dec 3, 2019
- Abate by
- Dec 9, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.23(b)(8): (8) Ladders were not used only for the purposes for which they were designed: a) On or about June 19, 2019, and at times prior, employees operating the paint plant were exposed to fall hazards where an aluminum step ladder was not positioned with the braces extended to secure the front and back sections in an open position while the ladder is in use.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.23 B10
- Issued
- Dec 3, 2019
- Abate by
- Dec 9, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.23(b)(10): Ladders having defects were not marked and taken out of service until repaired: a) On or about June 19, 2019, and at times prior, employees operating the paint plant were exposed to fall hazards where the aluminum step ladder on the outside of the plant had a damaged bottom step. b) On or about June 19, 2019, and at times prior, employees operating the paint plant were exposed to fall hazards where the step ladder at the end of the product line had a damaged bottom step.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.134 C02 I
- Issued
- Dec 3, 2019
- Abate by
- Dec 9, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(c)(2)(i): Respirator users were not provided with the information contained in Appendix D to 29 CFR 1910.134 when the employer determined that any voluntary respirator use was permissible: a) On or about June 19, 2019, and at times prior, employees voluntarily using respirators were not provided with the information contained in Appendix D of 29 CFR 1910.134.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.157 E03
- Issued
- Dec 3, 2019
- Abate by
- Dec 9, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.157(e)(3): Portable fire extinguishers were not subjected to an annual maintenance check: a) On or about June 19, 2019, and at times prior, employees were exposed to fire and/or smoke hazards where a fire extinguisher in the paint plant had not been serviced since September 2016. Abatement Note: Abatement certification is required for this item (see enclosed "Certification of Corrective Action Worksheet").
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections in this industry (NAICS 562920)
More inspections in CO
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344094842.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.