VINELAND, NJ —
OSHA Inspection: VINELAND PACKAGING CORPORATION
Planned inspection · Health discipline
At a glance
On , OSHA opened a planned health inspection of VINELAND PACKAGING CORPORATION in 3602 NORTH MILL ROAD, VINELAND, NJ 08360 (NAICS 561910). OSHA activity number 344095245.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- VINELAND PACKAGING CORPORATION
- Site address
- 3602 NORTH MILL ROAD
- City
- VINELAND
- State
- NJ
- ZIP
- 08360
- Mailing
- 3602 NORTH MILL ROAD, VINELAND, NJ 08360
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 561910
- Employees
- 40
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.212 A01
- Issued
- Oct 15, 2019
- Abate by
- Oct 25, 2019
- Penalty
- Initial $5,304 · Current $3,288 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: a) Production/South end: Employees were operating the Slitter - Scorer machine without the use of a guard exposing employees to ingoing nip points created by the rotating feed wheels, on or about 6/20/19. NOTE: IN ADDITION TO ABATEMENT CERTIFICATION, THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT DOCUMENTATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.
Recent events (2)
- — I (S) $3288
- — Z (S) $5304
1910.219 D01
- Issued
- Oct 15, 2019
- Abate by
- Nov 8, 2019
- Penalty
- Initial $5,304 · Current $3,288 Reduced
General-duty citation text
29 CFR 1910.219(d)(1): Pulley(s) with part(s) seven feet or less from the floor or work platform were not guarded in accordance with the requirements specified in 29 CFR 1910.219(m) and (o): a) Production Area: The employer did not install a guard on either side of the S&S ZLR Flexographic Printer 50 X 113 to protect employees from the rotating pulleys on the machine, on or about 6/20/19. NOTE: IN ADDITION TO ABATEMENT CERTIFICATION, THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT DOCUMENTATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.
Recent events (2)
- — I (S) $3288
- — Z (S) $5304
1910.219 E01 I
- Issued
- Oct 15, 2019
- Abate by
- Nov 8, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.219(e)(1)(i): Horizontal belts which had both runs seven feet or less from the floor level were not guarded with a guard that extended to at least fifteen inches above the belt: a) Production Area: The employer did not install a guard on either side of the S&S ZLR Flexographic Printer 50 X 113 to protect employees from the rotating belts on the machine, on or about 6/20/19. NOTE: IN ADDITION TO ABATEMENT CERTIFICATION, THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT DOCUMENTATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.219 F03
- Issued
- Oct 15, 2019
- Abate by
- Nov 15, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.219(f)(3): Sprocket wheels and chains which were seven 7 feet or less above floors or platforms were not enclosed: a) Production Area: The employer did not install a guard on the S&S ZLR Flexographic Printer 50 X 113 to protect employees from the chain and sprocket next to the operating buttons on the machine, on or about 6/20/19. NOTE: IN ADDITION TO ABATEMENT CERTIFICATION, THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT DOCUMENTATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.305 G01 IV B
- Issued
- Oct 15, 2019
- Abate by
- Oct 25, 2019
- Penalty
- Initial $3,978 · Current $2,467 Reduced
General-duty citation text
29 CFR 1910.305(g)(1)(iv)(B): Flexible cords and/or cables were run through holes in walls, ceilings, or floors: a) Maintenance Shop: A flexible cord in the maintenance shop was being run through a hole in the wall to power a data entry computer in the plant, on or about 6/20/19. NOTE: IN ADDITION TO ABATEMENT CERTIFICATION, THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT DOCUMENTATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.
Recent events (2)
- — I (S) $2467
- — Z (S) $3978
More inspections in this industry (NAICS 561910)
More inspections in NJ
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344095245.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.