Safety Incidents OSHA Severe Injury Reports · 2015–2025
2,004,209Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

OSHA Inspection: DUNCAN CABINETRY, INC.

Monitoring inspection · Safety discipline

On , OSHA opened a monitoring safety inspection of DUNCAN CABINETRY, INC. in 725 WATER STREET EXTENSION, WRIGHTSVILLE, PA 17368 (NAICS 337110). OSHA activity number 344098215.

Watch Duncan Cabinetry, INC. — free Get an email when a new federal OSHA severe-injury report for Duncan Cabinetry, INC. is published. One employer, no account, unsubscribe in one click.
Site address
725 WATER STREET EXTENSION
City
WRIGHTSVILLE
State
PA
ZIP
17368
Mailing
725 WATER STREET EXTENSION, WRIGHTSVILLE, PA 17368
Inspection type
Monitoring (D)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
337110
Employees
5
Ownership type
A

6 citations on file for this inspection.

1903.19 C01

Other-than-serious 1 instance 5 exposed
Issued
Abate by
Penalty
Initial $319.00 · Current $319.00
29 CFR 1903.19(c)(1): The employer did not certify to OSHA, within 10 calendar days after the abatement date, that the cited violation had been abated:  a) Location - Duncan Cabinetry- On or about September 23, 2019, the employer did not provide certification of abatement for citations issued on August 14, 2019.
Recent events (1)
  • — Z (O) $319

1910.22 A01

Serious Gravity 5 1 instance 5 exposed
Issued
Abate by
Penalty
Initial $2842.00 · Current $2842.00
29 CFR 1910.22(a)(1): All places of employment, passageways, storerooms, service rooms, and walking-working surfaces were not kept in a clean, orderly, and sanitary condition:  (a)  DUST COLLECTION TRAILER AND PLATFORM - The employer did not ensure that the dust collection trailer and the elevated platform that the dust collection system was installed on were free from fugitive wood dust accumulation, on or about June 20, 2019.  In the alternative  29 CFR 1910.141(a)(3)(i): All places of employment were not kept clean to the extent that the nature of the work allows.  (a)  DUST COLLECTION TRAILER AND PLATFORM - The employer did not ensure that the dust collection trailer and the elevated platform that the dust collection system was installed on were free from fugitive wood dust accumulation, on or about June 20, 2019.  Abatement certification required within 10 days after abatement date.  The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (2)
  • — I (S) $2842
  • — Z (S) $2842

1910.23 C11

Deleted Serious Gravity 5 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $2273.00 · Current $0.00 Reduced
29 CFR 1910.23(c)(11): The employer did not ensure that portable ladders used to gain access to an upper landing surface had side rails that extended at least 3 feet (0.9 m) above the upper landing surface:  DUST COLLECTION SYSTEM PLATFORM - Employees used a ten foot aluminum ladder to access the platform at the dust collection system, and the rungs of the ladder only extended approximately 23 inches past the upper landing surface, on or about June 20, 2019.  Abatement certification required within 10 days after abatement date.  The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (2)
  • — I (S) $0
  • — Z (S) $2273

1910.29 B02 I

Deleted Serious Gravity 5 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $2273.00 · Current $0.00 Reduced
29 CFR 1910.29(b)(2)(i): Midrails were not installed at a height midway between the top edge of the guiderail system and the walking-working surface:  (a)  DUST COLLECTION SYSTEM PLATFORM - Employees used the elevated platform at the dust collection system when emptying the collection trailer, and the guardrail around the platform was not equipped with a mid-rail, on or about June 20, 2019.  Abatement certification required within 10 days after abatement date.  The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (2)
  • — I (S) $0
  • — Z (S) $2273

1910.303 B07 I

Serious Gravity 5 1 instance 2 exposed
Issued
Penalty
Initial $2273.00 · Current $2158.00 Reduced
29 CFR 1910.303(b)(7)(i): Unused openings in boxes, raceways, auxiliary gutters, cabinets, equipment cases, or housings were not effectively closed to afford protection substantially equivalent to the wall of the equipment:    (a)  DUST COLLECTION ROOM - Employees operated the light switches for the shop area, and the electrical panel that housed the light switches contained two unused openings that were not covered which exposed employees to the energized conductors within, on or about June 20, 2019.    No abatement certification or documentation required.
Recent events (2)
  • — I (S) $2158
  • — Z (S) $2273

1910.134 C02 I

Other-than-serious 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.134(c)(2)(i): Respirator users were not provided with the information contained in Appendix D to 29 CFR 1910.134 when the employer determined that any voluntary respirator use was permissible:  PRODUCTION AREA - Employees used filtering facepiece respirators while performing tasks including wood cutting and sanding, and the employer did not provide the employees with the information contained in Appendix D to 29 CFR 1910.134, on or about August 8, 2019.  Abatement certification required within 10 days after abatement date.  The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

View DUNCAN CABINETRY, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344098215.