HILLSIDE, IL —
OSHA Inspection: SWEET HOME KITCHEN & BATH INC.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of SWEET HOME KITCHEN & BATH INC. in 4620 ROOSEVELT ROAD, HILLSIDE, IL 60162 (NAICS 337110). OSHA activity number 344100698.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- SWEET HOME KITCHEN & BATH INC.
- Site address
- 4620 ROOSEVELT ROAD
- City
- HILLSIDE
- State
- IL
- ZIP
- 60162
- Mailing
- 4620 ROOSEVELT ROAD, HILLSIDE, IL 60162
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 337110
- Employees
- 60
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.37 A03
- Issued
- Oct 10, 2019
- Penalty
- Initial $3,977 · Current $2,385 Reduced
General-duty citation text
29 CFR 1910.37(a)(3): Exit routes must be free and unobstructed. No materials or equipment may be placed, either permanently or temporarily, within the exit route: a) Saw Area - On June 18, 2019, the employer did not ensure that the exit route was not blocked by boxes of cabinet products. b) South West Corner of Warehouse - On June 18, 2019, the employer did not ensure that the exit route was not blocked by boxes of cabinet products.
Recent events (2)
- — I (S) $2385
- — Z (S) $3977
1910.213 C01
- Issued
- Oct 10, 2019
- Abate by
- Dec 16, 2019
- Penalty
- Initial $9,282 · Current $5,575 Reduced
General-duty citation text
29 CFR 1910.213(c)(1): Circular hand-fed ripsaw(s) were not guarded by an automatically adjusting hood, which completely enclosed that portion of the saw above the table and above the material being cut: a) Saw Area - On July 10, 2019, the employer did not ensure that the Grizzly 10' Circular Hand-fed Table Saw, model #G0691, was guarded by an automatically adjusting hood, which completely enclosed that portion of the saw above the table and above the material being cut. b) Saw Area - On July 10, 2019, the employer did not ensure that the Grizzly 10' Circular Hand-fed Table Saw, model #G0691, serial #130468-17, was guarded by an automatically adjusting hood, which completely enclosed that portion of the saw above the table and above the material being cut.
Recent events (3)
- — P (S) $5575
- — I (S) $5575
- — Z (S) $9282
1910.213 C02
- Issued
- Oct 10, 2019
- Abate by
- Dec 16, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.213(c)(2): Handfed circular saw(s) were not furnished with a spreader to prevent materials from squeezing the saw or being thrown back on the operator: a) Saw Area - On July 10, 2019, the employer did not ensure that the Grizzly 10' Circular Hand-fed Table Saw, model #G0691, was furnished with a spreader to prevent materials from squeezing the saw or being thrown back to the operator. b) Saw Area - On July 10, 2019, the employer did not ensure that the Grizzly 10' Circular Hand-fed Table Saw, model #G0691, serial #130468-17, was furnished with a spreader to prevent materials from squeezing the saw or being thrown back to the operator.
Recent events (3)
- — P (S) $0
- — I (S) $0
- — Z (S) $0
1910.213 C03
- Issued
- Oct 10, 2019
- Abate by
- Dec 16, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.213(c)(3): Hand-fed ripsaw(s) did not have non kickback fingers or dogs so located as to oppose the thrust or tendency of the saw to pick up the material or to throw it back toward the operator: a) Saw Area - On July 10, 2019, the employer did not ensure that the Grizzly 10' Circular Hand-fed Table Saw, model #G0691, had non kickback fingers or dogs so located as to oppose the thrust or tendency of the saw to pick up the material or to throw it back toward the operator. b) Saw Area - On July 10, 2019, the employer did not ensure that the Grizzly 10' Circular Hand-fed Table Saw, model #G0691, serial #130468-17, had non kickback fingers or dogs so located as to oppose the thrust or tendency of the saw to pick up the material or to throw it back toward the operator.
Recent events (3)
- — P (S) $0
- — I (S) $0
- — Z (S) $0
1910.213 H01
- Issued
- Oct 10, 2019
- Abate by
- Nov 6, 2019
- Penalty
- Initial $6,630 · Current $4,040 Reduced
General-duty citation text
29 CFR 1910.213(h)(1): The sides of the lower exposed portion of the blade of radial saw(s) were not guarded to the full diameter of the blade by a device that automatically adjusted itself to the thickness of the stock and remained in contact with the material being cut. a) Saw Area - On July 10, 2019, the employer did not ensure that the DeWalt Radial Saw, model #DWS7085, was guarded to the full diameter of the blade by a device that automatically adjusted itself to the thickness of the stock and remained in contact with the material being cut.
Recent events (2)
- — I (S) $4040
- — Z (S) $6630
More inspections at Sweet Home Kitchen & Bath INC.
View Sweet Home Kitchen & Bath INC.'s full OSHA safety record →
More inspections in this industry (NAICS 337110)
More inspections in IL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344100698.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.