Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: BBP PLUMBING, INC.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of BBP PLUMBING, INC. in 115 COLUMBIA, PARK RIDGE, IL 60068 (NAICS 237110). OSHA activity number 344111984.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch BBP Plumbing, INC. — free Get an email when a new federal OSHA severe-injury report for BBP Plumbing, INC. is published. One employer, no account, unsubscribe in one click.
Establishment
BBP PLUMBING, INC.
Site address
115 COLUMBIA
City
PARK RIDGE
State
IL
ZIP
60068
Mailing
209 N. CATHY LANE, MOUNT PROSPECT, IL 60056
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
237110
Employees
3
Ownership type
A

6 citations on file for this inspection.

1926.21 B02

Serious Gravity 10 2 instances 2 exposed
Issued
Oct 2, 2019
Abate by
Oct 29, 2019
Penalty
Initial $3,978 · Current $2,500 Reduced
29 CFR 1926.21(b)(2): The employer did not instruct each employee in the recognition and avoidance of unsafe conditions and the regulations applicable to his/her environment to control or eliminate any hazards or other exposure to illness or injury:        a) On or about June 26, 2019, the employer did not provide instruction to employees in the recognition and avoidance of unsafe conditions and the regulations applicable to their work environment to control or minimize the hazards associated with their work.       In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (2)
  • — I (S) $2500
  • — Z (S) $3978

1926.200 G01

Serious Gravity 5 2 instances 3 exposed
Issued
Oct 2, 2019
Abate by
Oct 8, 2019
Penalty
Initial $2,273 · Current $1,500 Reduced
29 CFR 1926.200(g)(1): Construction areas were not posted with legible traffic signs at points of hazards:          a) On or about June 26, 2019, employees were exposed to struck-by hazards where the employer did not provide at least one advanced warning sign as required by Part VI of the MUTCD 1988 Edition, Sections 6G-2B(4) and 6H-2D to warn road users that road work is taking place.        In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
  • — I (S) $1500
  • — Z (S) $2273

1926.651 C02

Serious Gravity 10 1 instance 2 exposed
Issued
Oct 2, 2019
Penalty
Initial $3,978 · Current $2,890 Reduced
29 CFR 1926.651(c)(2): A stairway, ladder, ramp or other safe means of egress was not located in trench excavations that were 4 feet (1.22m) or more in depth so as to require no more than 25 feet (7.62m) of lateral travel for employees:         a) On or about June 26, 2019, safe means of egress was not provided where work was conducted in a trench having a depth of approximately 7 feet.        No abatement certification or documentation required for this violation.
Recent events (2)
  • — I (S) $2890
  • — Z (S) $3978

1926.1053 B01

Serious Gravity 1 1 instance 2 exposed
Issued
Oct 2, 2019
Penalty
Initial $1,705 · Current $0 Reduced
29 CFR 1926.1053(b)(1): Where portable ladders were used for access to an upper landing surface and the ladder's length allows, the ladder side rails did not extend at least 3 feet (.9 m) above the upper landing surface being accessed:    a) On or about June 16, 2019, employees were exposed to the hazard of falling approximately 7 feet where a portable extension ladder did not extend at least 3 feet above the landing surface at the top of a trench.              No abatement certification or documentation required for this violation.
Recent events (2)
  • — I (S) $0
  • — Z (S) $1705

1926.651 K01

Serious Gravity 10 1 instance 2 exposed
Issued
Oct 2, 2019
Abate by
Oct 29, 2019
Penalty
Initial $3,978 · Current $3,000 Reduced
29 CFR 1926.651(k)(1): An inspection of the excavations, the adjacent areas, and protective systems was not conducted by the competent person prior to the start of work and as needed throughout the shift:          a) On or about June 26, 2019, the employer did not have a competent person conduct inspections prior to the start of work and as needed throughout the shift during trenching and excavation work.         In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (2)
  • — I (S) $3000
  • — Z (S) $3978

1926.652 A01

Serious Gravity 10 1 instance 2 exposed
Issued
Oct 2, 2019
Abate by
Oct 8, 2019
Penalty
Initial $3,978 · Current $0 Reduced
29 CFR 1926.652(a)(1): Each employee in an excavation was not protected from cave-ins by an adequate protective system designed in accordance with 29 CFR 1926.652(c):          a) On or about June 26, 2018, employees were not protected from the hazard of cave-ins by shoring, sloping, or other protective means while working in a trench having a depth of approximately 7 feet.     In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (2)
  • — I (S) $0
  • — Z (S) $3978

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344111984.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.