GRAFTON, WI —
OSHA Inspection: CASSEL BOX & LUMBER CO., INC.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of CASSEL BOX & LUMBER CO., INC. in 1100 FALLS RD., GRAFTON, WI 53024 (NAICS 321920). OSHA activity number 344114343.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- CASSEL BOX & LUMBER CO., INC.
- Site address
- 1100 FALLS RD.
- City
- GRAFTON
- State
- WI
- ZIP
- 53024
- Mailing
- 1100 FALLS RD., GRAFTON, WI 53024
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 321920
- Employees
- 6
- Ownership type
- A
Citations
7 citations on file for this inspection.
1910.178 L01 I
- Issued
- Oct 25, 2019
- Abate by
- Dec 16, 2019
- Penalty
- Initial $2,273 · Current $1,136 Reduced
General-duty citation text
29 CFR 1910.178(l)(1)(i): The employer did not ensure that each powered industrial truck operator is competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l): (a) On or about June 24, 2019, at the worksite located at 1100 Falls Rd., Grafton, WI, the employer did not ensure employees who operate forklifts received training in powered industrial truck safety, thereby exposing workers to struck-by and crushing hazards.
Recent events (2)
- — I (S) $1136
- — Z (S) $2273
1910.178 M03
- Issued
- Oct 25, 2019
- Abate by
- Oct 31, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(m)(3): Unauthorized personnel were permitted to ride on industrial truck(s): (a) On or about June 24, 2019, at the worksite located at 1100 Falls Rd., Grafton, WI, the employer did not ensure workers were prevented from riding on a load that was being transported by a powered industrial truck, thereby exposing employees to struck-by and crushing hazards.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.178 Q07
- Issued
- Oct 25, 2019
- Abate by
- Nov 21, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(q)(7): Industrial trucks were not examined before being placed in service: (a) On or about June 24, 2019, at the worksite located at 1100 Falls Rd., Grafton, WI, the employer did not ensure inspections of powered industrial trucks were conducted, thereby exposing workers to struck-by hazards.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.212 A01
- Issued
- Oct 25, 2019
- Abate by
- Dec 16, 2019
- Penalty
- Initial $2,842 · Current $1,700 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: (a) On or about June 24, 2019, at the worksite located at 1100 Falls Rd., Grafton, WI, the employer did not ensure that the XL Ripper machine had adequate guarding, thereby exposing workers to laceration and amputation hazards.
Recent events (2)
- — I (S) $1700
- — Z (S) $2842
1910.305 G02 III
- Issued
- Oct 25, 2019
- Abate by
- Oct 31, 2019
- Penalty
- Initial $2,273 · Current $0 Reduced
General-duty citation text
29 CFR 1910.305(g)(2)(iii): Identification, splices, and terminations. Flexible cords and cables shall be connected to devices and fittings so that strain relief is provided that will prevent pull from being directly transmitted to joints or terminal screws. (a) On or about June 24, 2019, at the worksite located at 1100 Falls Rd., Grafton, WI, the employer did not ensure an electrical extension cord had adequate strain relief, thereby exposing workers to potential electrical hazards.
Recent events (2)
- — I (O) $0
- — Z (S) $2273
1910.22 A01
- Issued
- Oct 25, 2019
- Abate by
- Oct 31, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.22(a)(1): All places of employment, passageways, storerooms, service rooms and walking-working surfaces were not kept clean, orderly and in sanitary condition. (a) On or about June 24, 2019, at the work location of 1100 Falls Rd., Grafton, WI, the employer did not ensure that bodily fluids such as blood were cleaned from a restroom facility, thereby exposing workers to potential bloodborne pathogens.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.178 A06
- Issued
- Oct 25, 2019
- Abate by
- Oct 31, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(a)(6): The employer did not ensure that all nameplates and markings were in place: (a) On or about June 24, 2019, at the worksite located at 1100 Falls Rd., Grafton, WI, the employer did not ensure data plates and other similar specifications were present on a Yale forklift, thereby exposing workers to struck-by and crushing hazards.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Cassel BOX & Lumber CO., INC.
View Cassel BOX & Lumber CO., INC.'s full OSHA safety record →
More inspections in this industry (NAICS 321920)
More inspections in WI
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344114343.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.