KENOSHA, WI —
OSHA Inspection: AKER CUSTOM CARPENTRY, LLC
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of AKER CUSTOM CARPENTRY, LLC in 7120 GREEN BAY ROAD, KENOSHA, WI 53142 (NAICS 238350). OSHA activity number 344116231.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- AKER CUSTOM CARPENTRY, LLC
- Site address
- 7120 GREEN BAY ROAD
- City
- KENOSHA
- State
- WI
- ZIP
- 53142
- Mailing
- 2807 OAKHURST LANE, FRANKSVILLE, WI 53126
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238350
- Employees
- 7
- Ownership type
- A
Citations
5 citations on file for this inspection.
1903.19 D01
- Issued
- Oct 24, 2019
- Abate by
- Nov 7, 2019
- Penalty
- Initial $319 · Current $0 Reduced
General-duty citation text
29 CFR 1903.19(d)(1): The employer did not submit to the Agency documents demonstrating that abatement is complete for each willful or repeat violation and for any serious violation for which the Agency indicates in the citation that such abatement documentation is required. (a) The employer failed to provide documentation to the Agency demonstrating that abatement is completed for the serious violations that were issued by the Agency.
Recent events (2)
- — I (O) $0
- — Z (O) $319
1926.501 B01
- Issued
- Aug 8, 2019
- Abate by
- Aug 14, 2019
- Penalty
- Initial $2,273 · Current $1,900 Reduced
General-duty citation text
29 CFR 1926.501(b)(1): "Unprotected sides and edges." Each employee on a walking/working surface (horizontal and vertical surface) with an unprotected side or edge which is 6 feet (1.8 m) or more above a lower level shall be protected from falling by the use of guardrail systems, safety net systems, or personal fall arrest systems. (a) Two employees were observed performing work on an awning without fall protection in place, exposing them to a fall hazard of approximately 11 feet.
Recent events (2)
- — I (S) $1900
- — Z (S) $2273
1926.503 A01
- Issued
- Aug 8, 2019
- Abate by
- Aug 14, 2019
- Penalty
- Initial $2,273 · Current $0 Reduced
General-duty citation text
29 CFR 1926.503(a)(1): The employer shall provide a training program for each employee who might be exposed to fall hazards. The program shall enable each employee to recognize the hazards of falling and shall train each employee in the procedures to be followed in order to minimize these hazards. (a) The employer failed to ensure employees were properly trained on the recognition of fall hazards as well as mitigation of fall hazards through appropriate fall protection use.
Recent events (2)
- — I (S) $0
- — Z (S) $2273
1926.1053 B13
- Issued
- Aug 8, 2019
- Abate by
- Aug 14, 2019
- Penalty
- Initial $2,273 · Current $900 Reduced
General-duty citation text
29 CFR 1926.1053(b)(13): The top or top step of a stepladder was used as a step: (a) Employees were using the top step of a 10 foot step ladder to gain access to an awning approximately 11 feet high. This exposed the employee to a fall hazard of approximately 10 feet.
Recent events (2)
- — I (S) $900
- — Z (S) $2273
1926.1060 A
- Issued
- Aug 8, 2019
- Abate by
- Aug 14, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.1060(a): The employer did not provide a training program for each employee using ladders and stairways, as necessary, which would train each employee in the procedures to be followed to minimize hazards related to ladders and stairways: (a) The employer did not ensure that employees who are required to utilize ladders on jobsites had been trained on the procedures to be followed to minimize hazards related to ladders.
Recent events (2)
- — I (S) $0
- — Z (S) $0
More inspections in this industry (NAICS 238350)
More inspections in WI
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344116231.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.