FRANKLIN PARK, IL —
OSHA Inspection: THE CORTINA COMPANIES, INC. DBA CORTINA SAFETY PRODUCTS GROUP
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of THE CORTINA COMPANIES, INC. DBA CORTINA SAFETY PRODUCTS GROUP in 9428 FULLERTON AVENUE, FRANKLIN PARK, IL 60131 (NAICS 326199). OSHA activity number 344116330.
Where did this inspection happen?
- Site address
- 9428 FULLERTON AVENUE
- City
- FRANKLIN PARK
- State
- IL
- ZIP
- 60131
- Mailing
- 10706 W. GRAND AVE., FRANKLIN PARK, IL 60131
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 326199
- Employees
- 60
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.37 A03
- Issued
- Abate by
- Penalty
- Initial $3381.00 · Current $2367.00 Reduced
General-duty citation text
29 CFR 1910.37(a)(3): Exit routes must be free and unobstructed. No materials or equipment may be placed, either permanently or temporarily, within the exit route: a) V Aisle - On June 27, 2019, the employer did not ensure that the exit route was not blocked by boxes of product staged at the end of the aisle.
Recent events (2)
- — I (S) $2366.7
- — Z (S) $3381
1910.22 D01
- Issued
- Abate by
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1910.22(d)(1): Walking-working surfaces were not inspected, regularly and as necessary, and maintained in a safe condition: a) North Side of the Warehouse - On June 27, 2019, the employer did not ensure that the floor was maintained in a safe condition where material handling equipment was used. The floor hole drain, and trench drain were not completely covered along its entire length and covers in place were bent. b) North End G Aisle - On June 27, 2019, the employer did not ensure the work floor were not kept in good repair where material handling equipment was used. c) Z aisle - On June 27, 2019, the employer did not ensure the work floor were not kept in good repair where material handling equipment was used.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.178 L06
- Issued
- Penalty
- Initial $632.00 · Current $442.00 Reduced
General-duty citation text
29 CFR 1910.178(l)(6): The employer did not certify that each operator has been trained and evaluated as required by this paragraph (l). The certification shall include the name of the operator, the date of the training, the date of the evaluation, and the identity of the person(s) performing the training or evaluation. a) Warehouse - On June 27, 2019, the employer did not ensure that forklift operators had been trained and evaluated as required by this paragraph (l).
Recent events (2)
- — I (O) $442.4
- — Z (O) $632
1910.178 P01
- Issued
- Abate by
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1910.178(p)(1): Powered industrial truck found to be in need of repair, defective, or in any way unsafe, were not taken out of service until it has been restored to safe operating condition: a) Warehouse - On June 27, 2019, the employer did not ensure the Crown forklift serial #1A164258, was removed from service when the back lights were broken.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.178 Q07
- Issued
- Abate by
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1910.178(q)(7): Industrial trucks were not examined before being placed in service and were placed in service when the examination showed condition(s) that would adversely affect the safety of the vehicle: a) Warehouse - On June 27, 2019, the employer did not ensure the Crown forklift serial #1A164258, was examined before being placed in service. This forklift was being operated with broken back lights.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections in this industry (NAICS 326199)
CONNEAUT, OH—2026-07-13
CONTINENTAL STRUCTURAL PLASTICS
PETALUMA, CA—2026-07-10
LABCON NORTH AMERICA
KEEWATIN, MN—2026-07-09
111565 - TACKLE TAMER PRODUCTS INC
EAST FLAT ROCK, NC—2026-07-09
161517 - ELKAMET, INC.
LANESBOROUGH, MA—2026-07-08
LANSEN MOLD CO., INC.
More inspections in IL
BLOOMINGTON, IL—2026-07-13
UNKNOWN CONTRACTOR
GRANITE CITY, IL—2026-07-13
UNITED STATES STEEL CORPORATION
DECATUR, IL—2026-07-10
TILLAMOOK ILLINOIS, LLC
NEW LENOX, IL—2026-07-10
A.D GENERAL CONSTRUCTION LLC
LOCKPORT, IL—2026-07-09
ROBERTO GOMEZ DBA ROBERTO GOMEZ
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344116330.