CHERRY LOG, GA —
OSHA Inspection: HENKELS & MCCOY, INC.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of HENKELS & MCCOY, INC. in 826 CHERRY LOG SUMMIT DRIVE, CHERRY LOG, GA 30522 (NAICS 237130). OSHA activity number 344132667.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- HENKELS & MCCOY, INC.
- Site address
- 826 CHERRY LOG SUMMIT DRIVE
- City
- CHERRY LOG
- State
- GA
- ZIP
- 30522
- Mailing
- 975 CORPORATE BLVD., AURORA, IL 60502
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- A
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 237130
- Employees
- 9
- Ownership type
- A
Citations
2 citations on file for this inspection.
1926.952 A02
- Issued
- Dec 16, 2019
- Abate by
- Jan 21, 2020
- Penalty
- Initial $13,260 · Current $13,260
General-duty citation text
29 CFR 1926.952(a)(2): Briefing by the employee in charge. The employer did not ensure that the employee in charge conducted a job briefing that meets paragraphs (b), (c), and (d) of this section with the employees involved before they start each job. a) Site - On or about 07/01/19 and at times prior thereto employees were aligning poles in a new line in proximity of an existing energized line, and the employer did not ensure that a briefing was conducted prior to the commencement of the work to review the hazards, tools, protective equipment, and safe procedures. In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (3)
- — F (O) $13260
- — C (S) $13260
- — Z (S) $13260
1926.960 C01 III
- Issued
- Dec 16, 2019
- Abate by
- Jan 21, 2020
- Penalty
- Initial $72,930 · Current $0 Reduced
General-duty citation text
29 CFR 1926.960(c)(1)(iii): The employer did not ensure that no employee approaches or takes any conductive object closer to exposed energized parts than the employer's established minimum approach distance, unless the measures outlined in 1926.960(c)(1)(iii)(A) - (C) were met: a) Site - On or about 07/01/19 and at times prior thereto employees were aligning poles in a new line in proximity of an existing energized line, and the employer did not ensure that safe approach distances were maintained, and/or adequate insulation methods were applied. Henkels & McCoy, Inc. was previously cited for a violation of this occupational safety and health standard or its equivalent standard 29 CFR 1926.960(c)(1)(iii), which was contained in OSHA inspection number 1238270, citation number 1, item number 1, and was affirmed as a final order on 07/06/18, with respect to a workplace located at 16002 Max Legget Parkway, Jacksonville, FL 32218. In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (3)
- — F (R) $0
- — C (R) $72930
- — Z (R) $72930
More inspections at Henkels & Mccoy, INC.
View Henkels & Mccoy, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 237130)
More inspections in GA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344132667.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.