CHARLES TOWN, WV —
OSHA Inspection: VENTURA CARPENTRY INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of VENTURA CARPENTRY INC. in THUMPER DRIVE, CHARLES TOWN, WV 25414 (NAICS 238130). OSHA activity number 344135991.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- VENTURA CARPENTRY INC.
- Site address
- THUMPER DRIVE
- City
- CHARLES TOWN
- State
- WV
- ZIP
- 25414
- Mailing
- 952 LINWOOD ROAD, HAGERSTOWN, MD 21740
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238130
- Employees
- 3
- Ownership type
- A
Citations
3 citations on file for this inspection.
1926.102 A01
- Issued
- Aug 7, 2019
- Abate by
- Aug 26, 2019
- Penalty
- Initial $3,410 · Current $2,400 Reduced
General-duty citation text
29 CFR 1926.102(a)(1): Eye and face protective equipment were not used when machines or operations presented potential eye or face injury from physical, chemical, or radiation agents. (a) Charles Town, New Construction: On July 2, 2019, employees were installing sheathing on a roof using a Pasload pneumatic nail gun without the use of proper eye protection.
Recent events (2)
- — I (S) $2400
- — Z (S) $3410
1926.501 B13
- Issued
- Aug 7, 2019
- Abate by
- Aug 26, 2019
- Penalty
- Initial $3,978 · Current $2,800 Reduced
General-duty citation text
29 CFR 1926.501(b)(13): Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501 (b): (a) Charles Town, New Construction: On July 2, 2019, employees were installing sheathing on a roof that measured approximately 20 feet eave to ground without an adequate fall protection system in place.
Recent events (2)
- — I (S) $2800
- — Z (S) $3978
1926.501 B14
- Issued
- Aug 7, 2019
- Abate by
- Aug 26, 2019
- Penalty
- Initial $2,273 · Current $1,600 Reduced
General-duty citation text
29 CFR 1926.501(b)(14): Each employee working on, at, above, or near wall openings (including those with chutes attached), where the outside bottom edge of the wall opening was 6 feet (1.8 m) or more above lower levels and the inside bottom edge of the wall opening is less than 39 inches (1.0 M) above the walking/working surface, is not protected from falling by the use of a guardrail system, a safety net system, or a personal fall arrest system. (a) Charles Town, New Construction: On July 2, 2019, an employee was installing interior framing in proximity to a window opening that measured approximately 12 feet from the working surface to ground without an adequate fall protection system in place.
Recent events (2)
- — I (S) $1600
- — Z (S) $2273
More inspections at Ventura Carpentry INC.
View Ventura Carpentry INC.'s full OSHA safety record →
More inspections in this industry (NAICS 238130)
More inspections in WV
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344135991.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.