HUTCHINSON, KS —
OSHA Inspection: LUMINOUS NEON INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of LUMINOUS NEON INC. in 1429 W. 4TH AVE, HUTCHINSON, KS 67501 (NAICS 339950). OSHA activity number 344140454.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- LUMINOUS NEON INC.
- Site address
- 1429 W. 4TH AVE
- City
- HUTCHINSON
- State
- KS
- ZIP
- 67501
- Mailing
- 1 COMPOUND DR., HUTCHINSON, KS 67502
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 339950
- Employees
- 40
- Ownership type
- A
Citations
7 citations on file for this inspection.
1910.37 B02
- Issued
- Nov 22, 2019
- Abate by
- Dec 19, 2019
- Penalty
- Initial $6,630 · Current $3,647 Reduced
General-duty citation text
29 CFR 1910.37(b)(2): Each exit was not clearly visible and marked by a sign reading "Exit": Employees were exposed to fire hazards. Employees working in the Finishing Building were exposed to fire hazards in that the exits were not clearly visible and marked by a sign reading "Exit" in the following locations: a) North Door b) East Door
Recent events (2)
- — I (S) $3646.5
- — Z (S) $6630
1910.184 E01
- Issued
- Nov 22, 2019
- Abate by
- Dec 19, 2019
- Penalty
- Initial $6,630 · Current $3,647 Reduced
General-duty citation text
29 CFR 1910.184(e)(1): Alloy steel sling(s) did not have permanently affixed durable identification stating size, grade, rated capacity, and reach: Employees were exposed to struck-by hazards. Employees working in the area of the cranes in the main shop area, and in the Finishing Building were exposed in that alloy steel slings used to lift materials were not identified with permanent affixed, durable identification, stating the size, grade, rate capacity, and reach.
Recent events (2)
- — I (S) $3646.5
- — Z (S) $6630
1910.212 A01
- Issued
- Nov 22, 2019
- Abate by
- Dec 19, 2019
- Penalty
- Initial $6,630 · Current $3,647 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: Employees were exposed to amputation hazards. Employees working at and near the Toolkraft, Model #4340, Serial #08X1403 belt sander in the main shop were exposed in that the ingoing nip points of the sanding belt and the rollers were not guarded.
Recent events (2)
- — I (S) $3646.5
- — Z (S) $6630
1910.219 D01
- Issued
- Nov 22, 2019
- Abate by
- Dec 19, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.219(d)(1): Pulley(s) with part(s) seven feet or less from the floor or work platform were not guarded in accordance with the requirements specified in 29 CFR 1910.219(m) and (o): Employees were exposed to amputation hazards. Employees working at and near the Toolkraft, Model #4340, Serial #08X1403 belt sander in the main shop were exposed in that pulleys were not adequately guarded.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.219 E03 I
- Issued
- Nov 22, 2019
- Abate by
- Dec 19, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.219(e)(3)(i): Vertical or inclined belt(s) were not enclosed by guard(s) conforming to the requirements specified at 29 CFR 1910.219(m) and (o) Employees were exposed to ingoing nip point hazards. Employees working at and near the Toolkraft, Model #4340, Serial #08X1403 belt sander in the main shop were exposed in that the belts were not fully enclosed by guards.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.212 B
- Issued
- Nov 22, 2019
- Abate by
- Dec 19, 2019
- Penalty
- Initial $5,304 · Current $0 Reduced
General-duty citation text
29 CFR 1910.212(b): Machine designed for fixed location was not securely anchored to prevent walking or moving: Employees were exposed to struck-by hazards. Employees working in the Truck Barn Building were exposed in that the Ryobi bench drill press was not securely anchored to prevent movement.
Recent events (2)
- — I (S) $0
- — Z (S) $5304
1910.305 G02 III
- Issued
- Nov 22, 2019
- Abate by
- Dec 19, 2019
- Penalty
- Initial $5,304 · Current $2,917 Reduced
General-duty citation text
29 CFR 1910.305(g)(2)(iii): Flexible cords were not connected to devices and fittings so that tension would not be transmitted to joints or terminal screws: Employees were exposed to electrical shock and burn hazards. Employees working in the main shop area were exposed in that the outer insulation on the electrical power cord for the belt sander was pulled away from the plug end.
Recent events (2)
- — I (S) $2917.2
- — Z (S) $5304
More inspections at Luminous Neon INC.
View Luminous Neon INC.'s full OSHA safety record →
More inspections in this industry (NAICS 339950)
More inspections in KS
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344140454.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.