OSWEGO, NY —
OSHA Inspection: INDUSTRIAL PRECISION PRODUCTS INC
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of INDUSTRIAL PRECISION PRODUCTS INC in 350 MITCHELL STREET, OSWEGO, NY 13126 (NAICS 332710). OSHA activity number 344142880.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- INDUSTRIAL PRECISION PRODUCTS INC
- Site address
- 350 MITCHELL STREET
- City
- OSWEGO
- State
- NY
- ZIP
- 13126
- Mailing
- 350 MITCHELL STREET, OSWEGO, NY 13126
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332710
- Employees
- 14
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.179 J03
- Issued
- Nov 1, 2019
- Abate by
- Dec 2, 2019
- Penalty
- Initial $3,334 · Current $2,000 Reduced
General-duty citation text
29 CFR 1910.179(j)(3): Complete periodic inspections of the crane were not performed at intervals as generally defined in paragraph (j)(1)(ii)(b) of this section: a) At the establishment, on or about 7/10/2019: Overhead cranes throughout the site are not periodically inspected.
Recent events (2)
- — I (S) $2000.4
- — Z (S) $3334
1910.179 L01
- Issued
- Nov 1, 2019
- Abate by
- Dec 2, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.179(l)(1): A preventive maintenance program based on the crane manufacturer's recommendations was not established: a) At the establishment, on or about 7/10/2019: A preventative maintenance program was not developed and implemented.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.212 A01
- Issued
- Nov 1, 2019
- Abate by
- Dec 2, 2019
- Penalty
- Initial $5,001 · Current $2,001 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): The employer did not provide one or more methods of machine guarding to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: a) At establishment, on or about 7/10/2019: The employer permitted operation of Bridgeport Drill Mill without a guard around the rotating chuck. INDUSTRIAL PRECISION PRODUCTS INC WAS PREVIOUSLY CITED FOR A VIOLATION OF THIS OCCUPATIONAL SAFETY AND HEALTH STANDARD OR ITS EQUIVALENT STANDARD 29 CFR 1910.212(a)(1), WHICH WAS CONTAINED IN INSPECTION NUMBER 1087778, CITATION NUMBER 1, ITEM NUMBER 3 AND WAS AFFIRMED AS A FINAL ORDER ON 10/22/2015, WITH RESPECT TO A WORKPLACE LOCATED AT 350 MITCHELL STREET, OSWEGO, NY 13126.
Recent events (2)
- — I (R) $2000.6
- — Z (R) $5001
1910.215 A04
- Issued
- Nov 1, 2019
- Abate by
- Dec 2, 2019
- Penalty
- Initial $6,668 · Current $4,001 Reduced
General-duty citation text
29 CFR 1910.215(a)(4): Work rest(s) on grinding machinery were not adjusted closely to the wheel with a maximum opening of one eighth inch. a) At Building #3, on or about 7/10/2019: The opening to the work rest on a Hartford grinder was 1 1/4 inch. INDUSTRIAL PRECISION PRODUCTS INC WAS PREVIOUSLY CITED FOR A VIOLATION OF THIS OCCUPATIONAL SAFETY AND HEALTH STANDARD OR ITS EQUIVALENT STANDARD 29 CFR 1910.215(a)(4), WHICH WAS CONTAINED IN INSPECTION NUMBER 1087778, CITATION NUMBER 1, ITEM NUMBER 4A AND WAS AFFIRMED AS A FINAL ORDER ON 10/22/2015, WITH RESPECT TO A WORKPLACE LOCATED AT 350 MITCHELL STREET, OSWEGO, NY 13126.
Recent events (2)
- — I (R) $4000.6
- — Z (R) $6668
1910.215 B09
- Issued
- Nov 1, 2019
- Abate by
- Dec 2, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.215(b)(9): The employer did not ensure the distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch: a) At Building #3, on or about 7/10/2019: The Hartford grinder did not have a tongue guard. INDUSTRIAL PRECISION PRODUCTS INC WAS PREVIOUSLY CITED FOR A VIOLATION OF THIS OCCUPATIONAL SAFETY AND HEALTH STANDARD OR ITS EQUIVALENT STANDARD 29 CFR 1910.215(b)(9), WHICH WAS CONTAINED IN INSPECTION NUMBER 1087778, CITATION NUMBER 1, ITEM NUMBER 4B AND WAS AFFIRMED AS A FINAL ORDER ON 10/22/2015, WITH RESPECT TO A WORKPLACE LOCATED AT 350 MITCHELL STREET, OSWEGO, NY 13126.
Recent events (2)
- — I (R) $0
- — Z (R) $0
More inspections at Industrial Precision Products INC
View Industrial Precision Products INC's full OSHA safety record →
More inspections in this industry (NAICS 332710)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344142880.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.