UTICA, NY —
OSHA Inspection: PEZZOLANELLA CONSTRUCTION COMPANY, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of PEZZOLANELLA CONSTRUCTION COMPANY, INC. in 1420 ORISKANY BOULEVARD, UTICA, NY 13502 (NAICS 236220). OSHA activity number 344145958.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- PEZZOLANELLA CONSTRUCTION COMPANY, INC.
- Site address
- 1420 ORISKANY BOULEVARD
- City
- UTICA
- State
- NY
- ZIP
- 13502
- Mailing
- 520 SENECA STREET, UTICA, NY 13502
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 236220
- Employees
- 8
- Ownership type
- A
Citations
4 citations on file for this inspection.
1926.304 F
- Issued
- Aug 22, 2019
- Penalty
- Initial $2,842 · Current $1,705 Reduced
General-duty citation text
29 CFR 1926.304(f) Section 4.1.2(c) American National Standards Institute 01.1-1961, Safety Code for Woodworking Machinery as adopted by 29 CFR 1926.304(f): Circular hand-fed rip saws did not have non-kickback fingers or dogs so located as to oppose the thrust or tendency of the saw to pick up the material or to throw it back toward the operator: 29 CFR 1926.304(f) Section 5.1.3.3 American National Standards Institute 01.1-1975, Safety Code for Woodworking Machinery as adopted by 29 CFR 1926.304(f): Electrically driven equipment was not equipped with magnetic switches or other devices that will prevent automatic restarting of the machine after a power failure: a) 1420 Oriskany Boulevard, center of building, interior, on or about 7-11-19: Two employees were cutting wood on a table saw that was not equipped with non kick-back fingers or "dogs". b) 1420 Oriskany Boulevard, center of building, interior, on or about 7-11-19: Two employees were cutting wood on a table saw that was not equipped with a magnetic switch or anti-restart device.
Recent events (2)
- — I (S) $1705.2
- — Z (S) $2842
1926.304 I01
- Issued
- Aug 22, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.304(i)(1): Each circular had-fed ripsaw was not guarded by a hood which completely enclosed that portion of the saw above the table and that portion of the saw above the material being cut: a) Center of building, interior, on or about 7-11-19: Two employees were cutting wood on a table saw that was not equipped with a hood guard that automatically adjusts to enclose the saw blade.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1926.403 B02
- Issued
- Aug 22, 2019
- Penalty
- Initial $2,273 · Current $1,364 Reduced
General-duty citation text
29 CFR 1926.403(b)(2): Listed, labeled, or certified equipment was not installed and used in accordance with instructions included in the listing, labeling, or certification: a) Northwest corner of building, interior, on or about 7-11-19: Two employees were using a 4"x4" galvanized receptacle box that was not being used as "listed and labeled", in that it was not permanently mounted and not being used as designed or for its intended purpose.
Recent events (2)
- — I (S) $1363.8
- — Z (S) $2273
1926.404 F06
- Issued
- Aug 22, 2019
- Penalty
- Initial $2,842 · Current $0 Reduced
General-duty citation text
29 CFR 1926.404(f)(6): The path to ground from circuits, equipment, or enclosures was not permanent and continuous: a) Center of building, interior, on or about 7-11-19: Employees were using a metal cased 36 inch diameter blower fan that with a power cord that did not have a continuous path to ground due to a missing ground pin.
Recent events (2)
- — I (S) $0
- — Z (S) $2842
More inspections at Pezzolanella Construction Company, INC.
View Pezzolanella Construction Company, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 236220)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344145958.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.