TROY, NY —
OSHA Inspection: CUMMINS-WAGNER HOLDINGS, INC.
Complaint inspection · Health discipline
At a glance
On , OSHA opened a complaint health inspection of CUMMINS-WAGNER HOLDINGS, INC. in 244 FIRST STREET, TROY, NY 12180 (NAICS 423830). OSHA activity number 344158209.
What this inspection record means
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Watch Cummins-Wagner Holdings, INC. — free
Get an email when a new federal OSHA severe-injury report for Cummins-Wagner Holdings, INC. is published. One employer, no account, unsubscribe in one click.
Where did this inspection happen?
- Establishment
- CUMMINS-WAGNER HOLDINGS, INC.
- Site address
- 244 FIRST STREET
- City
- TROY
- State
- NY
- ZIP
- 12180
- Mailing
- 244 FIRST STREET, TROY, NY 12180
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 423830
- Employees
- 14
- Ownership type
- A
Citations
12 citations on file for this inspection.
1910.107 C06
- Issued
- Oct 31, 2019
- Abate by
- Dec 5, 2019
- Penalty
- Initial $6,630 · Current $5,636 Reduced
General-duty citation text
29 CFR 1910.107(c)(6): Electrical wiring and equipment not subject to deposits of combustible residues but located in a spraying area as herein defined were not explosion-proof type approved for Class I, group D locations and did not otherwise conform to the provisions of subpart S of this part, for Class I, Division 1, Hazardous Locations: (a) On or about 7/25/2019, in the paint area, for the service technicians working with/around hazardous chemicals such as, but not limited to, Industrial Choice Aerosol - Topcoats that is flammable. Employer did not provide approved explosion-proof type wiring and equipment.
Recent events (2)
- — I (S) $5635.5
- — Z (S) $6630
1910.107 G02
- Issued
- Oct 31, 2019
- Abate by
- Nov 20, 2019
- Penalty
- Initial $6,630 · Current $0 Reduced
General-duty citation text
29 CFR 1910.107(g)(2): All spraying areas were not kept as free from the accumulation of deposits of combustible residues as practical, with cleaning conducted daily if necessary: (a) On or about 7/25/2019, in the paint area, for the service technicians working with/around hazardous chemicals such as, but not limited to, Industrial Choice Aerosol - Topcoats that is flammable. Employer did not keep the spraying area clean and free from combustibles.
Recent events (2)
- — I (S) $0
- — Z (S) $6630
1910.134 C01
- Issued
- Oct 31, 2019
- Abate by
- Dec 5, 2019
- Penalty
- Initial $3,978 · Current $0 Reduced
General-duty citation text
29 CFR 1910.134(c)(1): In the workplace where respirators were necessary to protect the health of the employee or where respirators were required by the employer, the employer did not establish and implement a written respiratory protection program with worksite-specific procedures including the provisions (i)-(ix) of this section, as applicable: (a) On or about 7/25/2019, at facility, for the service technicians wearing an N95 respirator while grinding/cutting gaskets and metal or sweeping the floor. The employer did not implement a worksite-specific respiratory protection program. Abatement Note: The Respiratory Protection Program shall include the following sections: (1) Procedures for selecting respirators for use in the workplace; (2) Medical evaluations of employees required to use respirators; (3) Fit testing procedures for tight-fitting respirators; (4) Procedures for proper use of respirators in routine and reasonably foreseeable emergency situations; (5) Procedures and schedules for cleaning, disinfecting, storing, inspecting, repairing, discarding, and otherwise maintaining respirators; (6) Procedures to ensure adequate air quality, quantity, and flow of breathing air for atmosphere- supplying respirators (if used); (7) Training of employees in the respiratory hazards to which they are potentially exposed during routine and emergency situations; (8) Training of employees in the proper use of respirators, including putting on and removing them, any limitations on their use, and their maintenance; and (9) Procedures for regularly evaluating the effectiveness of the program.
Recent events (2)
- — I (S) $0
- — Z (S) $3978
1910.134 E01
- Issued
- Oct 31, 2019
- Abate by
- Dec 5, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(e)(1): The employer did not provide a medical evaluation to determine the employee's ability to use a respirator, before the employee is fit tested or required to use the respirator in the workplace: (a) On or about 7/25/2019, at facility, for the service technicians wearing an N95 respirator while grinding/cutting gaskets and metal or sweeping the floor. The employee was not provided a medical evaluation prior to being required to wear the respirator.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.134 K01 I
- Issued
- Oct 31, 2019
- Abate by
- Dec 5, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(k)(1)(i): The employer did not ensure that each employee can demonstrate knowledge of why the respirator was necessary and how improper fit, usage, or maintenance can compromise the protective effect of the respirator: (a) On or about 7/25/2019, at facility, for the service technicians wearing an N95 respirator while grinding/cutting gaskets and metal or sweeping the floor. The employer did not train employee on respiratory protection.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.252 B02 III
- Issued
- Oct 31, 2019
- Abate by
- Dec 5, 2019
- Penalty
- Initial $3,978 · Current $3,381 Reduced
General-duty citation text
29 CFR 1910.252(b)(2)(iii): Workers and other persons adjacent to the welding area were not required to wear appropriate goggles to protect them from the rays when noncombustible or flameproof screens or shields were not used: (a) On or about 7/25/2019, at facility, for the service technicians, welding operations are conducted in an open area adjacent to other work areas. The employer did not implement protection such as appropriate eye protection or welding screens.
Recent events (2)
- — I (S) $3381.3
- — Z (S) $3978
1910.1030 G02 I
- Issued
- Oct 31, 2019
- Abate by
- Dec 5, 2019
- Penalty
- Initial $6,630 · Current $5,636 Reduced
General-duty citation text
29 CFR 1910.1030(g)(2)(i): The employer did not train each employee with occupational exposure in accordance with the requirements of this section: (a) On and before 7/25/2019, at jobsite, for the service technicians that could come in contact with blood, needles, or other potentially infectious materials. Employer did not train employees in bloodborne pathogens.
Recent events (2)
- — I (S) $5635.5
- — Z (S) $6630
1910.1200 E01
- Issued
- Oct 31, 2019
- Abate by
- Dec 5, 2019
- Penalty
- Initial $6,630 · Current $0 Reduced
General-duty citation text
29 CFR 1910.1200(e)(1): Employer did not develop, implement, and maintain at each workplace, a written hazard communication program which at least describes how the criteria specified in paragraphs (f), (g), and (h) of this section for labels and other forms of warning, safety data sheets, and employee information and training will be met, and which also includes the following: (a) On and before 07/25/2019, at facility, for the service technicians sandblasting with chemicals such as, but not limited to, silica. Employer did not develop a hazard communication program.
Recent events (2)
- — I (S) $0
- — Z (S) $6630
1910.1200 H01
- Issued
- Oct 31, 2019
- Abate by
- Dec 5, 2019
- Penalty
- Initial $0 · Current $3,978
General-duty citation text
29 CFR 1910.1200(h)(1): Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area: (a) On and before 07/25/2019, at facility, for the service technicians sandblasting with chemicals such as, but not limited to, silica. Employer did not train employees on hazard communication.
Recent events (2)
- — I (S) $3978
- — Z (S) $0
1910.134 F02
- Issued
- Oct 31, 2019
- Abate by
- Dec 5, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(f)(2): The employer did not ensure that employees using tight fitting face piece respirators pass an appropriate qualitative or quantitative fit test prior to initial use of the respirator, whenever a different respirator facepiece (size, style, model or make) is used, and at least annually thereafter. (a) On or about 7/25/2019, at facility, for the service technicians wearing an N95 respirator while grinding/cutting gaskets and metal or sweeping the floor. The employee was not fit tested, either qualitatively or quantitatively, prior to being required to use this respirator by the employer.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.157 C01
- Issued
- Oct 31, 2019
- Abate by
- Nov 12, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.157(c)(1): Portable fire extinguishers were not mounted, located and identified so that they were readily accessible without subjecting the employees to injuries: a) On or about 7/17/2019, at facility, employer did not ensure portable fire extinguishers were mounted and readily accessible.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.303 G01
- Issued
- Oct 31, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.303(g)(1): Sufficient access and working space was not provided and maintained about all electric equipment to permit ready and safe operation and maintenance of such equipment: (a) On or about 7/17/2019, at facility, the employer had blocked electrical panel with equipment making it difficult to access in the event of an emergency.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Cummins-Wagner Holdings, INC.
View Cummins-Wagner Holdings, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 423830)
Jul 14, 2026
WA317991786 - Olympic Equipment LLC · ARLINGTON, WA
Jul 10, 2026
WA317992051 - Qualls Stud Welding Products INC · KENT, WA
Jul 10, 2026
Cummins Sales and Service · CLOVERDALE, VA
Jul 1, 2026
Hazemag USA INC · MOUNT BRADDOCK, PA
Jul 1, 2026
Tractor Supply Company of Michigan LLC · CALEDONIA, MI
More inspections in NY
Jul 17, 2026
Sullivan County Care Center at Sunset Lake · LIBERTY, NY
Jul 17, 2026
Vergara Electrical LLC · NEW YORK, NY
Jul 17, 2026
Apple Converting, INC. · ONEONTA, NY
Jul 17, 2026
Namicela Home Solutions INC · SYRACUSE, NY
Jul 17, 2026
Cranesville Block CO., INC. · SYRACUSE, NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344158209.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.