LITTLETON, MA —
OSHA Inspection: SAJAWI CORPORATION
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of SAJAWI CORPORATION in 24 PORTER ROAD, LITTLETON, MA 01460 (NAICS 332999). OSHA activity number 344160585.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- SAJAWI CORPORATION
- Site address
- 24 PORTER ROAD
- City
- LITTLETON
- State
- MA
- ZIP
- 01460
- Mailing
- 24 PORTER ROAD, LITTLETON, MA 01460
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332999
- Employees
- 24
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.147 C01
- Issued
- Aug 16, 2019
- Abate by
- Nov 1, 2019
- Penalty
- Initial $3,789 · Current $1,800 Reduced
General-duty citation text
29 CFR 1910.147(c)(1): The employer did not establish a program consisting of an energy control procedure, employee training and periodic inspections to ensure that before any employee performed any servicing or maintenance on a machine or equipment where the unexpected energizing, startup or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source and rendered inoperative: (a) Location - 24 Porter Road, Littleton, MA: On or about 7/17/2019, a program consisting of an energy control procedure, employee training, and periodic inspections has not been established to ensure employees performing service and maintenance on machines and equipment are protected from hazards where unexpected energizing, startup, or release of stored energy could occur and cause injury.
Recent events (2)
- — I (S) $1800
- — Z (S) $3789
1910.212 A01
- Issued
- Aug 16, 2019
- Abate by
- Nov 1, 2019
- Penalty
- Initial $3,789 · Current $1,800 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: (a) Location - 24 Porter Road, Littleton, MA: On or about 7/17/2019, the unused portions of the blade of the Versatix MP9-91600 horizontal band saw were not guarded or otherwise enclosed. (b) Location - 24 Porter Road, Littleton, MA: On or about 7/17/2019, the rotating chucks of the Powermatic Houdaille Model 1150 drill presses were not guarded.
Recent events (2)
- — I (S) $1800
- — Z (S) $3789
1910.215 A04
- Issued
- Aug 16, 2019
- Abate by
- Nov 1, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.215(a)(4): Grinding machinery was not used with work rest(s) to support offhand grinding work: (a) Location - 24 Porter Road, Littleton, MA: On or about 7/17/2019, the Baldor 8107W bench grinder did not have a work rest.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.215 B09
- Issued
- Aug 16, 2019
- Abate by
- Nov 1, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch: (a) Location - 24 Porter Road, Littleton, MA: On or about 7/17/2019, the Baldor 8107W bench grinder did not have a guard capable of being adjusted within one fourth inch of the periphery of the abrasive wheel.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.212 A03 II
- Issued
- Aug 16, 2019
- Abate by
- Nov 1, 2019
- Penalty
- Initial $5,304 · Current $2,400 Reduced
General-duty citation text
29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s): (a) Location - 24 Porter Road, Littleton, MA: On or about 7/17/2019, the point of operation of the Haeger hardware insertion machine was not guarded. (b) Location - 24 Porter Road, Littleton, MA: On or about 7/17/2019, the point of operation of the Scotchman 350HT/PK/PD cold saw was not guarded. (c) Location - 24 Porter Road, Littleton, MA: On or about 7/17/2019, the point of operation of the Amada CSW-220 notcher was not guarded. (d) Location - 24 Porter Road, Littleton, MA: On or about 7/17/2019, the point of operation of the Fadal VMC 2216FX CNC machine was not guarded.
Recent events (2)
- — I (S) $2400
- — Z (S) $5304
1910.255 B04
- Issued
- Aug 16, 2019
- Abate by
- Nov 1, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.255(b)(4): All press welding machine operations, where there was a possibility of the operator's fingers being under the point of operation, were not effectively guarded by use of a device such as an electronic eye safety circuit, two hand controls or protection similar to that prescribed for punch press operation, �1910.217 of this part: (a) Location - 24 Porter Road, Littleton, MA: On or about 7/17/2019, the point of operation of the Amada ID40 ST resistance welding machine was not guarded.
Recent events (2)
- — I (S) $0
- — Z (S) $0
More inspections in this industry (NAICS 332999)
More inspections in MA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344160585.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.