Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,645Inspections Most recent open 2026-07-16 Last loaded 2026-07-20

OSHA Inspection: LEFEVRE CORPORATION

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of LEFEVRE CORPORATION in 2710 GRAND CENTRAL AVENUE, VIENNA, WV 26105 (NAICS 236220). OSHA activity number 344162086.

Watch Lefevre Corporation — free Get an email when a new federal OSHA severe-injury report for Lefevre Corporation is published. One employer, no account, unsubscribe in one click.
Establishment
LEFEVRE CORPORATION
Site address
2710 GRAND CENTRAL AVENUE
City
VIENNA
State
WV
ZIP
26105
Mailing
406 WOODSIDE CIRCLE, CLARKSBURG, WV 26301
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
236220
Employees
200
Ownership type
A

6 citations on file for this inspection.

1926.95 A

Serious Gravity 1 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $5115.00 · Current $2000.00 Reduced
29 CFR 1926.95(a): Protective equipment, including personal protective equipment for eyes, face, head, and extremities, protective clothing, respiratory devices, and protective shields and barriers, were not provided:    (a) Vienna: On July 18, 2019 and times prior, an employee was performing masonry operations, cutting and setting stone without adequate foot protection while wearing open toed sandals.
Recent events (2)
  • — I (S) $2000
  • — Z (S) $5115

1926.451 B01

Serious Gravity 5 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $10229.00 · Current $4000.00 Reduced
29 CFR 1926.451(b)(1): Each platform on all working levels of scaffolds shall be fully planked or decked between the front uprights and the guardrail supports as follows:    (a) Vienna: On July 18, 2019, an employee was performing masonry operations working from a scaffold that was not fully planked.
Recent events (2)
  • — I (S) $4000
  • — Z (S) $10229

1926.451 C02 I

Serious Gravity 5 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $6819.00 · Current $2000.00 Reduced
29 CFR 1926.451(c)(2)(i): Footings shall be level, sound, rigid, and capable of supporting the loaded scaffold without settling or displacement.    (a) Vienna: On or about July 18, 2019, an employee was assembling panels above the drive through working from a scaffold that had one set of supports on gravel and the other set on wooden blocks.
Recent events (2)
  • — I (S) $2000
  • — Z (S) $6819

1926.502 D

Serious Gravity 5 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $6819.00 · Current $2000.00 Reduced
29 CFR 1926.502(d): The employer used body belts as part of a personal fall arrest system:Note:  The use of a body belt in a positioning device system is acceptable and is regulated under paragraph (e) of this section.      (a) Vienna: On or about July 8, 2019 and times prior, an employee was applying rubber to a flat roof that was approximately 15 feet high without the use of an adequate fall protection system.
Recent events (2)
  • — I (S) $2000
  • — Z (S) $6819

1926.20 B01

Serious Gravity 5 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1926.20(b)(1): The employer did not initiate and maintain an safety and health program as may be necessary to comply with the General safety and health provisions covered in 29 CFR 1926.20.  (a) South Charleston: On or about June 6, 2016, at the worksite, a safety and health program had not been initiated and maintained which addressed the following basic elements.  1.  Management Commitment and Leadership A.  Policy statement: goals established, issued, and communicated to employees. B.  Program Reviewed Annually. C.  Participation in safety meetings, inspections; agenda item in meetings. D.  Adequate commitment of resources. E.  Safety rules and procedures incorporated into site operations. F.  Management observations of safety rules.    2.  Assignment of Responsibility     A.  Safety designee on site, knowledgeable, and accountable. B.  Supervisors' (including foremen) safety and health responsibilities understood. C.  Employees adherence to safety rules.    3.  Identification and Control of Hazards A.  Periodic site inspection program involving supervisors. B.  Preventive controls in place (PPE, Maintenance, and Engineering Controls). C.  Action taken to address hazards. D.  Safety Committee, where appropriate. E.  Technical reference materials available.    4.  Training and Education A.  Supervisors receive basic safety and health training. B.  Specialized training taken when needed. C.  Existence of an employee training program, which is ongoing and effective.    5.  Recordkeeping and Hazard Analysis A.  Records maintained of employee illnesses/injuries, and posted.  B.  Supervisors perform incident investigations, determine causes, and propose corrective action. C.  Injuries, near misses, and illnesses are evaluated for trends, similar causes; corrective action initiated.    6.  First Aid and Medical Assistance A.  First aid supplies and medical services available. B.  Employees informed of medical results. C.  Emergency procedures and training, where necessary.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1926.452 C04

Other-than-serious 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1926.452(c)(4): End frames of tubular welded frame scaffolding were not locked together vertically by use of pins or equivalent means in areas where uplift could occur:   (a) Vienna: On or about July 18, 2019 and times prior, employees were performing masonry operations while working from a two buck scaffold that was erected without the insert pins between levels.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

UNKNOWN

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344162086.