NAMPA, ID —
OSHA Inspection: IDAHO WESTERN, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of IDAHO WESTERN, INC. in 6200 E HUNT AVE, NAMPA, ID 83687 (NAICS 321999). OSHA activity number 344169412.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- IDAHO WESTERN, INC.
- Site address
- 6200 E HUNT AVE
- City
- NAMPA
- State
- ID
- ZIP
- 83687
- Mailing
- 6200 E HUNT AVE, NAMPA, ID 83687
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 321999
- Employees
- 47
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.212 A01
- Issued
- Aug 27, 2019
- Penalty
- Initial $3,977 · Current $3,977
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: a) Production floor: On or about July 19, 2019 and at times prior thereto; Mareen Johnson Gang Rip Saw unguarded ingoing nip point and rotating shaft. b) Production floor: On or about July 19, 2019 and at times prior thereto; Mitek Smartset Pro Component Saw unguarded conveyor chains at terminal end of machine. Note* Abatement certification IS required for this item.
Recent events (2)
- — I (O) $3977
- — Z (S) $3977
1910.303 B02
- Issued
- Aug 27, 2019
- Penalty
- Initial $2,984 · Current $0 Reduced
General-duty citation text
29 CFR 1910.303(b)(2): Listed or labeled electrical equipment was not used or installed in accordance with instructions included in the listing or labeling: a) Production floor: On or about July 19, 2019 and at times prior thereto; portable extension cords were used in series in lieu of permanent wiring to power a wood elevator/wood scissor lift. Note* Abatement certification IS required for this item.
Recent events (2)
- — I (S) $0
- — Z (S) $2984
1910.305 G01 IV
- Issued
- Aug 27, 2019
- Penalty
- Initial $0 · Current $2,000
General-duty citation text
29 CFR 1910.305(g)(1)(iv): Flexible cords and/ or cables were used for purposes prohibited by paragraphs (A) through (F) of 29 CFR 1910.305(g)(1)(iv)(a): a) Production floor: On or about July 19, 2019 and at times prior thereto; portable extension cords were used in series in lieu of permanent wiring to power a wood elevator/wood scissor lift presenting electrical shock hazards where cords were run through a hole in a wall. Note* Abatement certification IS required for this item.
Recent events (2)
- — I (O) $2000
- — Z (S) $0
1910.334 A02 I
- Issued
- Aug 27, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.334(a)(2)(i): Portable cord and plug connected equipment and flexible cord sets (extension cords) were not visually inspected before use on any shift for external defects (such as loose parts, deformed and missing pins, or damage to outer jacket or insulation) and for evidence of possible internal damage (such as pinched or crushed outer jacket): a) Production Floor: On or about July 11, 2019 and at times prior thereto; sheathing on an extension cord attached to a Bander's battery pack was frayed. Note* Abatement certification IS required for this item.
Recent events (2)
- — I (O) $0
- — Z (S) $0
More inspections in this industry (NAICS 321999)
More inspections in ID
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344169412.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.