OSHA Inspection: CURALEAF NJ, INC.

Issued

Jan 21, 2020

Abate by

Feb 12, 2020

Penalty

Initial $6,747 · Current $4,385 Reduced

General-duty citation text

29 CFR 1910.147(c)(1): The employer did not establish a program consisting of an energy control procedure, employee training and periodic inspections to ensure that before any employee performed any servicing or maintenance on a machine or equipment where the unexpected energizing, startup or release of stored energy could occur and cause injury, the machine or equipment was not isolated from the energy source and rendered inoperative.    a) Lab 1: The employer did not develop and implement a written lockout tagout program including training, written procedures and periodic review for all of the machines serviced by employees including, but not limited to, Carbon Dioxide pressurized pumps Model #P200 Serial# 4009957 and Serial# 4077722. On or about 7/24/19.      NOTE: IN ADDITION TO ABATEMENT CERTIFICATION, THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT DOCUMENTATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.  .

Issued

Jan 21, 2020

Abate by

Feb 12, 2020

Penalty

Initial $6,747 · Current $4,383 Reduced

General-duty citation text

29 CFR 1910.147(c)(4)(ii)(C): The energy control procedure did not clearly and specifically outline the steps for placement, removal and transfer of lockout devices or tagout devices and the responsibility for them.      a) Lab 1: The energy control procedure provided to employees who serviced machines, such as, but not limited to, Carbon Dioxide pressurized pumps Model #P200 Serial# 4009957 and Serial# 4077722, did not outline the steps for the placement and removal of locks. On or about 7/24/19.        NOTE: IN ADDITION TO ABATEMENT CERTIFICATION, THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT DOCUMENTATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.

Issued

Jan 21, 2020

Abate by

Feb 12, 2020

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.147(c)(4)(ii)(D): The energy control procedures did not clearly and specifically outline the requirements for testing a machine or equipment to determine and verify the effectiveness of lockout devices, tagout devices, and other energy control measures:      a) Lab 1: The energy control procedure provided to employees who serviced machines, such as, but not limited to, Carbon Dioxide pressurized pumps Model #P200 Serial# 4009957 and Serial# 4077722 , did not outline the steps for the testing the machines to ensure that they were de-energized. On or about 7/24/19.        NOTE: IN ADDITION TO ABATEMENT CERTIFICATION, THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT DOCUMENTATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.

Issued

Jan 21, 2020

Abate by

Feb 12, 2020

Penalty

Initial $6,747 · Current $4,383 Reduced

General-duty citation text

29 CFR 1910.147(c)(5)(i): Locks, tags, chains, wedges, key blocks, adapter pins, self-locking fasteners, or other hardware were not provided by the employer for isolating, securing or blocking of machines or equipment from energy sources:      a) Lab 1: The employer did not provide hardware for isolating energy to machines serviced by employees including, but not limited to, Carbon Dioxide pressurized pumps Model #P200 Serial# 4009957 and Serial# 4077722. On or about 7/24/19.        NOTE: IN ADDITION TO ABATEMENT CERTIFICATION, THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT DOCUMENTATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.

Issued

Jan 21, 2020

Abate by

Feb 12, 2020

Penalty

Initial $6,747 · Current $4,383 Reduced

General-duty citation text

29 CFR 1910.147(c)(7)(i)(A): Authorized employee(s) did not receive training in the recognition of applicable hazardous energy sources, the type and magnitude of the energy available in the workplace, and the methods and means necessary for energy isolation:      a) Labs 1 and 3: The employer did not provide training to authorized employees who serviced equipment in the facility, such as, but not limited to, Carbon Dioxide Pressure Pumps, on the hazardous energy sources and the methods and means of energy isolation. On or about 7/24/19.          NOTE: IN ADDITION TO ABATEMENT CERTIFICATION, THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT DOCUMENTATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.

Issued

Jan 21, 2020

Abate by

Feb 12, 2020

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.147(c)(7)(i)(B): Affected employees were not instructed in the purpose and use of the energy control procedure:    a) Labs 1 and 3: The employer did not provide training to affected employees who worked in areas where equipment was serviced equipment in the facility, such as, but not limited to, Carbon Dioxide Pressure Pumps. On or about 7/24/19.     NOTE: IN ADDITION TO ABATEMENT CERTIFICATION, THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT DOCUMENTATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.

Issued

Jan 21, 2020

Abate by

Feb 12, 2020

Penalty

Initial $6,747 · Current $4,383 Reduced

General-duty citation text

29 CFR 1910.151(c): Where employees were exposed to injurious corrosive materials, suitable facilities for quick drenching or flushing of the eyes and body were not provided within the work area for immediate emergency use:    a) Shredder Shed: An eyewash station capable of 15 minutes of continuous flush, was not provided where corrosive chemicals were used such as but not limited to ZeroTol. On or about 7/24/19.            NOTE: THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT CERTIFICATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.

Issued

Jan 21, 2020

Abate by

Feb 12, 2020

Penalty

Initial $6,747 · Current $4,383 Reduced

General-duty citation text

29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks.    a) Lab 1: The Carbon Dioxide pumps Model# P 200 Serial# 4009957 and Serial# 4077722 were not guarded to protect employees that are in close proximity of a rotating part. On or about 7/24/19.       NOTE: IN ADDITION TO ABATEMENT CERTIFICATION, THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT DOCUMENTATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.