SAN ANTONIO, TX —
OSHA Inspection: BARTLETT COCKE GENERAL CONTRACTORS, LLC
Federal Agency inspection · Safety discipline
At a glance
On , OSHA opened a federal Agency safety inspection of BARTLETT COCKE GENERAL CONTRACTORS, LLC in PROJECT#5: COMAL HIGH SCHOOL #5 DESIGN TEAM 1400 KINDER PARKWAY, SAN ANTONIO, TX 78260 (NAICS 236220). OSHA activity number 344174800.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- BARTLETT COCKE GENERAL CONTRACTORS, LLC
- Site address
- PROJECT#5: COMAL HIGH SCHOOL #5 DESIGN TEAM 1400 KINDER PARKWAY
- City
- SAN ANTONIO
- State
- TX
- ZIP
- 78260
- Mailing
- 8706 LOCKWAY, SAN ANTONIO, TX 78217
What kind of inspection was it?
- Inspection type
- Federal Agency (M)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 236220
- Employees
- 600
- Ownership type
- A
Citations
5 citations on file for this inspection.
1926.301 D
- Issued
- Jan 22, 2020
- Penalty
- Initial $5,783 · Current $0 Reduced
General-duty citation text
29 CFR 1926.301(d): Wooden handles of tool(s) were not free of splinters or cracks: Project #5: On or about July 22, 2019, and at times prior thereto, employees were exposed to a struck-by hazards, when using a sledge hammer with cracks on the handle for the removal of pins.
Recent events (2)
- — I (S) $0
- — Z (S) $5783
1926.1403 A
- Issued
- Jan 22, 2020
- Abate by
- Feb 6, 2020
- Penalty
- Initial $13,494 · Current $10,800 Reduced
General-duty citation text
29 CFR 1926.1403(a): The employer did not follow the manufacturers procedures during the assembly/disassembly process: Project #5: On July 22, 2019, employee was exposed to a struck-by hazard, while removing connecting pins from the base of the lattice boom Link-Belt 218 HSL Lattice Boom Crane without following the manufacturers instructions such as, but not limited to, a) The pendant lines were not located behind the boom connection (butt/base) to be disassembled for assembly. b) The crane operator did not stand outside the boom while removing connecting pins.
Recent events (2)
- — I (S) $10800
- — Z (S) $13494
1926.1404 D01
- Issued
- Jan 22, 2020
- Abate by
- Feb 6, 2020
- Penalty
- Initial $11,566 · Current $0 Reduced
General-duty citation text
29 CFR 1926.1404(d)(1): The A/D director did not ensure the applicable assembly/disassembly procedures were understood by crew members including (i) their tasks, (ii) the hazards associated with their tasks, and (iii) the hazardous positions/locations that they need to avoid: Project #5: On July 22, 2019, at times prior thereto, employees were exposed to a struck-by hazard, while initiating the assembly/disassembly of a Link-Belt 218 HSL Lattice Boom Crane without understanding the sequence of the disassembly process on the removal of connecting pins for reconfiguration.
Recent events (2)
- — I (S) $0
- — Z (S) $11566
1926.1404 H02
- Issued
- Jan 22, 2020
- Abate by
- Feb 6, 2020
- Penalty
- Initial $13,494 · Current $0 Reduced
General-duty citation text
29 CFR 1926.1404(h)(2): The size, amount, condition and method of stacking the blocking was not sufficient to sustain the loads and maintain stability: Project #5: On or about July 22, 2019, and at times prior thereto, employees were exposed to a struck-by hazard, while performing assembly/disassembly of a Link-Belt 218 HSL Lattice Boom Crane without adequate blocking to sustain the boom from movement.
Recent events (2)
- — I (S) $0
- — Z (S) $13494
1926.1427 F06
- Issued
- Jan 22, 2020
- Abate by
- Feb 12, 2020
- Penalty
- Initial $11,566 · Current $9,200 Reduced
General-duty citation text
29 CFR 1926.1427(f)(6): The employer did not document the completion of the evaluation. This document must provide: The operators name; the evaluators name and signature; the date; and the make, model, and configuration of equipment used in the evaluation: Project #5: On or about July 22, 2019, and at times prior thereto, an employee was exposed to a struck-by hazard, while operating a Link-Belt 218 HSL Lattice Boom Crane without the employer documenting the assessment of the crane operator.
Recent events (2)
- — I (S) $9200
- — Z (S) $11566
More inspections at Bartlett Cocke General Contractors, LLC
View Bartlett Cocke General Contractors, LLC's full OSHA safety record →
More inspections in this industry (NAICS 236220)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344174800.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.