OSHA Inspection: ALL PEACE CONSTRUCTION, INC.

Issued

Dec 26, 2019

Abate by

Feb 18, 2020

Penalty

Initial $319 · Current $319

General-duty citation text

29 CFR 1903.19(c)(1):  The employer failed to certify to OSHA within 10 calendar days after the abatement date that each of the following cited violations had been corrected:     All Peace Construction, Inc., failed to certify to OSHA within 10 calendar days after the abatement date that each of the following cited violations had been corrected:     Citation Number                     Item Number                           Abatement Date            1                                           4                                           9/16/19    In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).

Issued

Jul 26, 2019

Penalty

Initial $2,273 · Current $1,492 Reduced

General-duty citation text

29 CFR 1926.102(a)(1): The employer did not ensure that each affected employee used appropriate eye or face protection when exposed to eye or face hazards from flying particles, molten metal, liquid chemicals, acids or caustic liquids, chemical gases or vapors, or potentially injurious light radiation.    On or about July 22, 2019 employees engaged in residential roofing operations were exposed to struck by hazards while operating pneumatic nail guns without eye protection.    No abatement certification or documentation required for this item.

Issued

Jul 26, 2019

Penalty

Initial $2,842 · Current $1,492 Reduced

General-duty citation text

29 CFR 1926.300(b)(2): Belts, gears, shafts, pulleys, sprockets, spindles, drums, fly wheels, chains, or other reciprocating, rotating, or moving parts of equipment exposed to contact by the employees or which otherwise created a hazard, were not guarded:    On or about June 22, 2019 employees were exposed to caught-in hazards from an unguarded belt and pulley on a Grip Rite air compressor used to supply air to pneumatic nail guns used during roofing operations.     No abatement certification or documentation is required for this item.

Issued

Jul 26, 2019

Penalty

Initial $3,978 · Current $1,492 Reduced

General-duty citation text

29 CFR 1926.501(b)(13): Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501 (b):     On or about July 22, 2019 employees engaged in residential roofing operations approximately 20 feet above grade were exposed to fall hazards.  Fall protection was not being utilized.      No abatement certification or documentation required for this item.

Issued

Jul 26, 2019

Abate by

Sep 16, 2019

Penalty

Initial $2,842 · Current $1,492 Reduced

General-duty citation text

29 CFR 1926.503(a)(1): The employer did not provide a training program for each employee potentially exposed to fall hazards to enable each employee to recognize the hazards of falling and the procedures to be followed in order to minimize these hazards:    On or about July 22, 2019 employees engaged in residential roofing operations approximately 20 feet above grade were exposed to fall hazards.  Employees had not received training to enable them to recognize and minimize fall hazards on the jobsite.     Abatement certification is required for this item in accordance with 1903(c).

Issued

Jul 26, 2019

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1926.1053(b)(1): Where portable ladders were used for access to an upper landing surface and the ladder's length allows, the ladder side rails did not extend at least 3 feet (.9 m) above the upper landing surface being accessed:  On or about July 22, 2019 employees using a ladder to access/egress a roof while engaged in roofing operations were exposed to fall hazards.  The extension ladder being used for access to the roof did not extend three feet above the roof eave/landing surface.     No abatement certification or documentation required for this item.