GREENVILLE, WI —
OSHA Inspection: JORGE GONZALEZ
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of JORGE GONZALEZ in W7014 ANGEL HILL DRIVE, GREENVILLE, WI 54942 (NAICS 238160). OSHA activity number 344189477.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- JORGE GONZALEZ
- Site address
- W7014 ANGEL HILL DRIVE
- City
- GREENVILLE
- State
- WI
- ZIP
- 54942
- Mailing
- 2201 CYPRESS WAY, MADISON, WI 53713
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238160
- Employees
- 12
- Ownership type
- A
Citations
8 citations on file for this inspection.
1926.21 B02
- Issued
- Nov 4, 2019
- Abate by
- Dec 4, 2019
- Penalty
- Initial $5,304 · Current $5,304
General-duty citation text
29 CFR 1926.21(b)(2): The employer shall instruct each employee in the recognition and avoidance of unsafe conditions and the regulations applicable to his work environment to control or eliminate any hazards or other exposure to illness or injury. On or about July 26, 2019, employees of Jorge Gonzalez were not trained in the recognition of hazards and unsafe conditions while conducting residential roofing operations.
Recent events (1)
- — Z (S) $5304
1926.100 A
- Issued
- Nov 4, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.100(a): Employees working in areas where there is a possible danger of head injury from impact, or from falling or flying objects, or from electrical shock and burns, shall be protected by protective helmets. On or about July 26, 2019, an employee of Jorge Gonzalez was completing clean up operations of fallen debris from a residential roofing project without a protective helmet while being exposed to potential falling objects.
Recent events (1)
- — Z (S) $0
1926.102 A01
- Issued
- Nov 4, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.102(a)(1): The employer shall ensure that each affected employee uses appropriate eye or face protection when exposed to eye or face hazards from flying particles, molten metal, liquid chemicals, acids or caustic liquids, chemical gases or vapors, or potentially injurious light radiation. On or about July 26, 2019, employees of Jorge Gonzalez were installing asphalt shingles with a pneumatic nail gun without wearing any form of eye protection.
Recent events (1)
- — Z (S) $0
1926.501 B13
- Issued
- Nov 4, 2019
- Penalty
- Initial $5,304 · Current $5,304
General-duty citation text
29 CFR 1926.501(b)(13): "Residential construction." Each employee engaged in residential construction activities 6 feet (1.8 m) or more above lower levels shall be protected by guardrail systems, safety net system, or personal fall arrest system unless another provision in paragraph (b) of this section provides for an alternative fall protection measure. Exception: When the employer can demonstrate that it is infeasible or creates a greater hazard to use these systems, the employer shall develop and implement a fall protection plan which meets the requirements of paragraph (k) of 1926.502. On or about July 26, 2019, four employees of Jorge Gonzalez were observed conducting re-roofing operations on a residential home without fall protection while being exposed to fall hazards of greater than 10'. Note: There is a presumption that it is feasible and will not create a greater hazard to implement at least one of the above-listed fall protection systems. Accordingly, the employer has the burden of establishing that it is appropriate to implement a fall protection plan which complies with 1926.502(k) for a particular workplace situation, in lieu of implementing any of those systems.
Recent events (1)
- — Z (S) $5304
1926.503 A01
- Issued
- Nov 4, 2019
- Abate by
- Dec 4, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.503(a)(1): The employer shall provide a training program for each employee who might be exposed to fall hazards. The program shall enable each employee to recognize the hazards of falling and shall train each employee in the procedures to be followed in order to minimize these hazards. On or about July 26, 2019, employees of Jorge Gonzalez had not been trained in the recognition of fall hazards and effective methods of fall protection including the correct use of personal fall arrest systems.
Recent events (1)
- — Z (S) $0
1926.1053 B01
- Issued
- Nov 4, 2019
- Penalty
- Initial $3,789 · Current $3,789
General-duty citation text
29 CFR 1926.1053(b)(1): When portable ladders are used for access to an upper landing surface, the ladder side rails shall extend at least 3 feet (.9 m) above the upper landing surface to which the ladder is used to gain access; or, when such an extension is not possible because of the ladder's length, then the ladder shall be secured at its top to a rigid support that will not deflect, and a grasping device, such as a grabrail, shall be provided to assist employees in mounting and dismounting the ladder. In no case shall the extension be such that ladder deflection under a load would, by itself, cause the ladder to slip off its support. On or about July 26, 2019, employees of Jorge Gonzalez were utilizing a blue Werner extension ladder to access a roof without having the side rails of the ladder extend three feet above the landing surface.
Recent events (1)
- — Z (S) $3789
1926.1053 B20
- Issued
- Nov 4, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.1053(b)(20): When ascending or descending a ladder, the user shall face the ladder. On or about July 26, 2019, an employee of Jorge Gonzalez descended an extension ladder, used to access a garage roof, while facing away from the ladder.
Recent events (1)
- — Z (S) $0
1926.1060 A
- Issued
- Nov 4, 2019
- Abate by
- Dec 4, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.1060(a): The employer shall provide a training program for each employee using ladders and stairways, as necessary. The program shall enable each employee to recognize hazards related to ladders and stairways, and shall train each employee in the procedures to be followed to minimize these hazards. On or about July 26, 2019, employees of Jorge Gonzalez had not been trained in recognized hazards relating to ladders, ladder set up and safe usage of ladders.
Recent events (1)
- — Z (S) $0
More inspections at Jorge Gonzalez
View Jorge Gonzalez's full OSHA safety record →
More inspections in this industry (NAICS 238160)
More inspections in WI
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344189477.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.