Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: ALLIED MOTION

Complaint inspection · Health discipline

On , OSHA opened a complaint health inspection of ALLIED MOTION in 8037 BAVARIA RD., TWINSBURG, OH 44087 (NAICS 336330). OSHA activity number 344190640.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Allied Motion — free Get an email when a new federal OSHA severe-injury report for Allied Motion is published. One employer, no account, unsubscribe in one click.
Establishment
ALLIED MOTION
Site address
8037 BAVARIA RD.
City
TWINSBURG
State
OH
ZIP
44087
Mailing
8037 BAVARIA RD., TWINSBURG, OH 44087
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
336330
Employees
50
Ownership type
A

5 citations on file for this inspection.

1910.178 L01 I

Serious Gravity 1 1 instance 11 exposed
Issued
Oct 28, 2019
Penalty
Initial $5,683 · Current $2,842 Reduced
29 CFR 1910.178(l)(1)(i): The employer did not ensure that each powered industrial truck operator is competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l):    On or about July 30, 2019, the employer had not conducted an appropriate evaluation of the workers who are allowed to operate the powered industrial vehicle(s) in use within the facility.
Recent events (2)
  • — I (S) $2841.5
  • — Z (S) $5683

1910.252 B02 I C

Serious Gravity 1 1 instance 5 exposed
Issued
Oct 28, 2019
Abate by
Dec 2, 2019
Penalty
Initial $5,683 · Current $2,842 Reduced
29 CFR 1910.252(b)(2)(i)(C): All operators and attendants of resistance welding or resistance brazing equipment did not use transparent face shields or goggles, depending on the particular job, to protect their faces or eyes, as required:    On or about July 30, 2019, the employer had not provided proper eye protection for the horizontal welder operators who were exposed to welder flash while the machine was in operation.
Recent events (2)
  • — I (S) $2841.5
  • — Z (S) $5683

1910.252 B02 III

Serious Gravity 1 1 instance 20 exposed
Issued
Oct 28, 2019
Abate by
Dec 2, 2019
Penalty
Initial $0 · Current $0
29 CFR 1910.252(b)(2)(iii): Workers and other persons adjacent to the welding area were not protected from the rays by noncombustible or flameproof screens or shields:  On or about July 30, 2019 the employer had not properly protected the workers that either work near or have to pass by the   horizontal welding machines in the welding area from the welder flash generated by the operation by screens or shields.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.1200 E01

Serious Gravity 1 1 instance 50 exposed
Issued
Oct 28, 2019
Abate by
Nov 5, 2019
Penalty
Initial $5,683 · Current $2,842 Reduced
29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met:    On or about July 30, 2019, the employer had not compiled and made available to the workers a written hazard communication program for such hazardous materials/chemicals as, but not limited to the solvents, welding wire and steel, etc. used on site.
Recent events (2)
  • — I (S) $2841.5
  • — Z (S) $5683

1910.1200 H03 IV

Serious Gravity 1 1 instance 50 exposed
Issued
Oct 28, 2019
Abate by
Nov 5, 2019
Penalty
Initial $0 · Current $0
29 CFR 1910.1200(h)(3)(iv):  Employee training did not include at least an explanation of the labels received on shipped containers and the workplace labeling system used by their employer and the safety data sheet, including the order of information and how employees can obtain and use the appropriate hazard information:    On or about July 30, 2019, the employer had not completed the training for all employees on this site as required compiled  for such hazardous materials/chemicals as, but not limited to the solvents, welding wire and steel, etc. used on site.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344190640.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.