VIOLA, KS —
OSHA Inspection: FIVES MACHINING SYSTEMS, INC.
Federal Agency inspection · Safety discipline
At a glance
On , OSHA opened a federal Agency safety inspection of FIVES MACHINING SYSTEMS, INC. in 19223 K42 HIGHWAY, VIOLA, KS 67149 (NAICS 811310). OSHA activity number 344198890.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- FIVES MACHINING SYSTEMS, INC.
- Site address
- 19223 K42 HIGHWAY
- City
- VIOLA
- State
- KS
- ZIP
- 67149
- Mailing
- 2200 LITTON LANE, HEBRON, KY 41048
What kind of inspection was it?
- Inspection type
- Federal Agency (M)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 811310
- Employees
- 405
- Ownership type
- A
Citations
3 citations on file for this inspection.
1910.147 C04 I
- Issued
- Jan 10, 2020
- Abate by
- Aug 1, 2020
- Penalty
- Initial $13,260 · Current $6,630 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: The employer is failing to protect employees from struck-by and crushing hazards. This was most recently documented on or about July 31, 2019 at the Youngers & Sons Manufacturing Company, Inc. facility located at 19223 K42 Highway Viola, Kansas. An employee of Fives Machining Systems Incorporated, contracted to perform servicing and maintenance on the Cincinnati Milacron Horizontal Milling Machine that included multiple energy sources, was exposed to struck-by and crushing hazards in that the specific machine procedures for a complete rebuild task were not developed, documented and utilized.
Recent events (2)
- — I (O) $6630
- — Z (S) $13260
1910.147 F01 II
- Issued
- Jan 10, 2020
- Abate by
- Aug 1, 2020
- Penalty
- Initial $13,260 · Current $10,608 Reduced
General-duty citation text
29 CFR 1910.147(f)(1)(ii): When lockout or tagout devices temporarily were removed from the energy isolating device and the machine or equipment was energized to test or position the machine, the employees were not removed from the machine or equipment area in accordance to the paragraph (e)(2): The employer is failing to protect employees from struck-by and crushing hazards. This was most recently documented on or about July 31, 2019 at the Youngers & Sons Manufacturing Company, Inc. facility located at 19223 K42 Highway Viola, Kansas. Employee engaged in orientation of the spindle activities at the Southeast corner of the shop area by the Cincinnati Milacron Horizontal Machining Center (Mill machine, Work Center #1036), Model Magnum 1000; Serial number 3145A0197-0009; 460 V 3 phase, 60 Hz. was exposed to crushing hazard. An employee was exposed to struck-by and crushing hazards in that the lockout devices were temporarily removed from the energy isolating device and the machine was energized to test or position the spindle alignment by working the encoder. The employer did not ensure that employees were removed from the machine prior to testing or positioning the equipment.
Recent events (2)
- — I (S) $10608
- — Z (S) $13260
1910.147 F02 I
- Issued
- Jan 10, 2020
- Abate by
- Feb 6, 2020
- Penalty
- Initial $13,260 · Current $0 Reduced
General-duty citation text
29 CFR 1910.147(f)(2)(i): Whenever outside personnel were engaged in activities covered by the scope and application of this standard, the on-site employer and the outside employer did not inform each other of their respective lockout or tagout procedures: The employer is failing to protect employees from struck-by and crushing hazards. This was most recently documented on or about July 31, 2019 at the Youngers & Sons Manufacturing Company, Inc. facility located at 19223 K42 Highway Viola, Kansas. Employee engaged in orientation of the spindle activities at the Southeast corner of the shop area by the Cincinnati Milacron Horizontal Machining Center (Mill machine, Work Center #1036), Model Magnum 1000; Serial number 3145A0197-0009; 460 V 3 phase, 60 Hz. was exposed to crushing hazard. An employee of Fives Machining Systems Incorporated, contracted to perform servicing and maintenance on the Cincinnati Milacron Horizontal Milling Machine that included multiple energy sources, was exposed to struck-by and crushing hazards in that the host employer and the contracted employer had not informed each other of their respective lockout tagout procedures.
Recent events (2)
- — I (S) $0
- — Z (S) $13260
More inspections in this industry (NAICS 811310)
More inspections in KS
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344198890.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.