DENVER, CO —
OSHA Inspection: SUPERIOR FARMS
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of SUPERIOR FARMS in 4900 CLARKSON STREET, DENVER, CO 80216 (NAICS 311612). OSHA activity number 344202544.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- SUPERIOR FARMS
- Site address
- 4900 CLARKSON STREET
- City
- DENVER
- State
- CO
- ZIP
- 80216
- Mailing
- 4900 CLARKSON STREET, DENVER, CO 80216
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 311612
- Employees
- 165
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.212 A01
- Issued
- Dec 3, 2019
- Abate by
- Dec 30, 2019
- Penalty
- Initial $5,796 · Current $5,796
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding were not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: (a) Superior Farms at 4900 Clarkson Street, Denver, CO 80216: On or about August 2, 2019 the employer did not ensure that three augers located in the basement under the production area were effectively guarded. This conditions exposed employees to rotating parts. (b) Superior Farms at 4900 Clarkson Street, Denver, CO 80216: On or about August 2, 2019 the employer did not ensure that a Dayton Mill press in the maintenance shop and storage area was effectively guarded. This conditions exposed employees to rotating parts. (c) Superior Farms at 4900 Clarkson Street, Denver, CO 80216: On or about August 2, 2019 the employer did not ensure that employees were protected from injury, in that the area where carcasses exit the de-hider station, specifically from the floor to the bottom of the hanging carcass, is not guarded to prevent employees coming in contact with the moving equipment when its in operation. This condition exposed employees to struck-by and rotating part hazards.
Recent events (2)
- — I (S) $5796
- — Z (S) $5796
1910.212 A03 II
- Issued
- Dec 3, 2019
- Abate by
- Dec 30, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.212(a)(3)(ii): The point of operation of machines whose operation exposes an employee to injury, shall be guarded: (a) Superior Farms at 4900 Clarkson Street, Denver, CO 80216: On or about August 2, 2019, the employer did not ensure that employees were protected from injury, in that the adjustable guards on the vertical band saws were not adjusted to minimize employee exposure to the unused section of the saw. This condition exposed employees to laceration and amputation hazards.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.215 A01
- Issued
- Dec 3, 2019
- Abate by
- Dec 30, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.215(a)(1): Abrasive wheels on machines were not provided with safety guards: Superior Farms at 4900 Clarkson Street, Denver, CO 80216: On or about August 2, 2019, the employer did not ensure that abrasive wheels were used only on machines provided with safety guards. The gap between the work rest and the wheel on the Dayton Industrial Grinder, Model No. 1Z707X was measured to be more than one-eighth of an inch. The gap between the wheel and the tongue guard was measured to be more than one-fourth of an inch. This condition exposed employees to struck-by hazards.
Recent events (2)
- — I (O) $0
- — Z (S) $0
1910.1200 G08
- Issued
- Dec 3, 2019
- Abate by
- Dec 30, 2019
- Penalty
- Initial $4,347 · Current $0 Reduced
General-duty citation text
29 CFR 1910.1200(g)(8): The employer did not ensure that safety data sheets were readily accessible during each work shift to employees when they were in their work area(s): a) Superior Farms at 4900 Clarkson Street, Denver, CO 80216: On or about August 2, 2019 the employer did not ensure that safety data sheets were readily accessible during each work shift to employees when they were in their work area(s). Maintenance employees used chemicals during their normal job duties including, but not limited to: Zep Oran-Gel Aerosol Degreaser and Chevron Superla White Oil. This condition exposed employees to chemical hazards.
Recent events (2)
- — I (S) $0
- — Z (S) $4347
1910.1200 H01
- Issued
- Dec 3, 2019
- Abate by
- Dec 30, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(h)(1): Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area: a) Superior Farms at 4900 Clarkson St, Denver, CO: On and around September 30, 2019, the employer did not provide employees with effective information and training on hazardous chemicals in their work area. Employees did not know the hazards of the chemicals in their work areas. This condition exposed employees to chemical hazards, including but not limited to 3-5% aqueous Lactic Acid.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.303 E01
- Issued
- Dec 3, 2019
- Abate by
- Dec 30, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.303(e)(1): Electric equipment was used prior to the required markings being placed on the equipment: a) Superior Farms at 4900 Clarkson Street, Denver, CO 80216: On or about 8/2/2019 the employer did not ensure that the manufacturer's name, trademark, or other descriptive marking by which the organization responsible for the product could be identified was placed on the equipment prior to use. Other markings giving voltage, current, wattage, or other ratings were also not placed on the equipment prior to use. Manufacturer's plates were missing or illegible on the band saws being used to break down carcasses in the fabrication area. This condition exposed employees to electrical hazards.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Superior Farms
View Superior Farms's full OSHA safety record →
More inspections in this industry (NAICS 311612)
More inspections in CO
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344202544.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.