Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: GAYLOR EXCAVATING, INC.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of GAYLOR EXCAVATING, INC. in 1620-1630 HIGGINS, DES PLAINES, IL 60018 (NAICS 237110). OSHA activity number 344208350.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Gaylor Excavating, INC. — free Get an email when a new federal OSHA severe-injury report for Gaylor Excavating, INC. is published. One employer, no account, unsubscribe in one click.
Site address
1620-1630 HIGGINS
City
DES PLAINES
State
IL
ZIP
60018
Mailing
5317 HAYDEN LANE, RINGWOOD, IL 60072
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
A
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
237110
Employees
3
Ownership type
A

3 citations on file for this inspection.

1926.21 B02

Serious Gravity 10 2 instances 2 exposed
Issued
Sep 20, 2019
Abate by
Oct 17, 2019
Penalty
Initial $5,304 · Current $4,250 Reduced
29 CFR 1926.21(b)(2): The employer did not instruct each employee in the recognition and avoidance of unsafe conditions and the regulations applicable to his/her environment to control or eliminate any hazards or other exposure to illness or injury:        a) On or about August 5, 2019, the employer did not instruct or provide instruction to employees in the recognition and avoidance of unsafe conditions and the regulations applicable to their work environment to control or minimize the hazards associated with their work.       In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (2)
  • — I (S) $4250
  • — Z (S) $5304

1926.651 K01

Serious Gravity 10 1 instance 2 exposed
Issued
Sep 20, 2019
Abate by
Sep 26, 2019
Penalty
Initial $5,304 · Current $0 Reduced
29 CFR 1926.651(k)(1): An inspection of the excavations, the adjacent areas, and protective systems was not conducted by the competent person prior to the start of work and as needed throughout the shift:         a) On or about August 5, 2019, the employer did not have a competent person conduct inspections prior to the start of work and as needed throughout the shift during trenching and excavation work.        In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (2)
  • — I (S) $0
  • — Z (S) $5304

1926.652 A01

Serious Gravity 10 2 instances 2 exposed
Issued
Sep 20, 2019
Abate by
Sep 26, 2019
Penalty
Initial $5,304 · Current $4,250 Reduced
29 CFR 1926.652(a)(1): Each employee in an excavation was not protected from cave-ins by an adequate protective system designed in accordance with 29 CFR 1926.652(c):         a) On or about August 5, 2019, employees were not protected from the hazard of cave-ins by shoring, sloping, or other protective means while working in a trench having depths ranging between approximately 7 and 8 feet.        In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (2)
  • — I (S) $4250
  • — Z (S) $5304

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344208350.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.