Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: ALUMINUM SHAPES, LLC.

Referral inspection · Safety discipline

On , OSHA opened a referral safety inspection of ALUMINUM SHAPES, LLC. in 9000 RIVER ROAD, DELAIR, NJ 08110 (NAICS 331316). OSHA activity number 344211248.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Aluminum Shapes, LLC. — free Get an email when a new federal OSHA severe-injury report for Aluminum Shapes, LLC. is published. One employer, no account, unsubscribe in one click.
Site address
9000 RIVER ROAD
City
DELAIR
State
NJ
ZIP
08110
Mailing
9000 RIVER ROAD, DELAIR, NJ 08110
Inspection type
Referral (C)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
A
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
331316
Employees
400
Ownership type
A

4 citations on file for this inspection.

1910.179 N03 I

Serious Gravity 10 1 instance 2 exposed
Issued
Jan 24, 2020
Abate by
Feb 14, 2020
Penalty
Initial $13,494 · Current $13,494
29 CFR 1910.179(n)(3)(i): The load was not well secured and properly balanced in the sling or lifting device before it was lifted more than a few inches:  (a) 9000 River Rd, Delair, NJ, Foundry Building, Maintenance Area near bay door: The hook of the gantry crane was attached to one eyelet on the side of the steel plate which created an unbalanced load when elevated, on or about 7/29/2019.       NOTE:  IN ADDITION TO ABATEMENT CERTIFICATION, THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT DOCUMENTATION FOR THIS ITEM, FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.
Recent events (3)
  • — J (S) $13494
  • — C (S) $13494
  • — Z (S) $13494

1910.179 J02 IV

Deleted Repeat Gravity 5 1 instance 2 exposed
Issued
Jan 24, 2020
Abate by
Feb 14, 2020
Penalty
Initial $53,015 · Current $0 Reduced
29 CFR 1910.179(j)(2)(iv): Monthly inspections of hoist chains, with a certification record which includes the date of inspection, the signature of the person who performed the inspection and an identifier of the chain which was inspected, were not performed:  a) 9000 River Rd, Delair, NJ, Foundry Building, Maintenance Area near bay door: Monthly inspections with written certifications were not performed on the chains to rig the steel plate onto the P&H Spectrum 1 ton gantry crane, on or about 8/2/2019.     ALUMINUM SHAPES LLC WAS PREVIOUSLY CITED FOR A VIOLATION OF THIS OCCUPATIONAL SAFETY AND HEALTH STANDARD, ITS EQUIVALENT, OR ESSENTIALLY SIMILAR STANDARD 29 CFR 1910.179(j)(2)(iv), WHICH WAS CONTAINED IN OSHA INSPECTION NUMBER 1059368 CITATION NUMBER 1, ITEM NUMBER 16C AND WAS AFFIRMED AS A FINAL ORDER ON 6/3/2016, WITH RESPECT TO A WORKPLACE LOCATED AT  9000 RIVER ROAD, DELAIR, NEW JERSEY 08313.  NOTE:  IN ADDITION TO ABATEMENT CERTIFICATION, THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT DOCUMENTATION FOR THIS ITEM, FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.
Recent events (3)
  • — J (R) $0
  • — C (R) $53015
  • — Z (R) $53015

1910.179 J03

Deleted Repeat Gravity 5 1 instance 2 exposed
Issued
Jan 24, 2020
Abate by
Feb 14, 2020
Penalty
Initial $53,015 · Current $0 Reduced
29 CFR 1910.179(j)(3): A complete periodic inspection of crane(s) had not been conducted in the past 12 months:  (a) 9000 River Rd, Delair, NJ, Foundry Building, Maintenance Area near bay door: A complete inspection of the P&H Spectrum 1 ton gantry cranehad not been conducted in the last 12 months, on or about 8/2/2019.       ALUMINUM SHAPES LLC WAS PREVIOUSLY CITED FOR A VIOLATION OF THIS OCCUPATIONAL SAFETY AND HEALTH STANDARD, ITS EQUIVALENT, OR ESSENTIALLY SIMILAR STANDARD 29 CFR 1910.179(j)(1)(ii)(b), WHICH WAS CONTAINED IN OSHA INSPECTION NUMBER 1059368 CITATION NUMBER 1, ITEM NUMBER 16a AND WAS AFFIRMED AS A FINAL ORDER ON 6/3/2016, WITH RESPECT TO A WORKPLACE LOCATED AT  9000 RIVER ROAD, DELAIR, NEW JERSEY 08313.  NOTE:  IN ADDITION TO ABATEMENT CERTIFICATION, THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT DOCUMENTATION FOR THIS ITEM, FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.
Recent events (3)
  • — J (R) $0
  • — C (R) $53015
  • — Z (R) $53015

1904.39 A02

Repeat 1 instance 1 exposed
Issued
Jan 24, 2020
Penalty
Initial $50,000 · Current $50,000
29 CFR 1904.39(a)(2): The employer did not report within 24-hours a work-related incident resulting in in-patient hospitalization, amputation or the loss of an eye.  a) Aluminum Shapes LLC located at 9000 River Road, Delair, New Jersey: On July 29, 2019, at approximately 10:30 am, a steel plate fell on the employees left foot resulting in multiple fractures and hospitalization of that employee. The employer did not report the hospitalization until 8/1/2019, which was not within the 24 hours reporting time frame.   ALUMINUM SHAPES LLC WAS PREVIOUSLY CITED FOR A VIOLATION OF THIS OCCUPATIONAL SAFETY AND HEALTH STANDARD, ITS EQUIVALENT, OR ESSENTIALLY SIMILAR STANDARD 29 CFR 1904.39(a)(2), WHICH WAS CONTAINED IN OSHA INSPECTION NUMBER 1143202 CITATION NUMBER 2, ITEM NUMBER 1 AND WAS AFFIRMED AS A FINAL ORDER ON 2/28/2017, WITH RESPECT TO A WORKPLACE LOCATED AT  9000 RIVER ROAD, DELAIR, NEW JERSEY 08313.  ALUMINUM SHAPES LLC WAS PREVIOUSLY CITED FOR A VIOLATION OF THIS OCCUPATIONAL SAFETY AND HEALTH STANDARD, ITS EQUIVALENT, OR ESSENTIALLY SIMILAR STANDARD2 9 CFR 1904.39(a)(2), WHICH WAS CONTAINED IN OSHA INSPECTION NUMBER 1120619 CITATION NUMBER 1, ITEM NUMBER 1 AND WAS AFFIRMED AS A FINAL ORDER ON 3/24/2016, WITH RESPECT TO A WORKPLACE LOCATED AT 9000 RIVER ROAD, DELAIR, NEW JERSEY 08313.  NOTE:  IN ADDITION TO ABATEMENT CERTIFICATION, THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT DOCUMENTATION FOR THIS ITEM, FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.
Recent events (3)
  • — J (R) $50000
  • — C (R) $50000
  • — Z (R) $50000

View Aluminum Shapes, LLC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344211248.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.