Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: FREEDOM METAL FINISHING, INC.

Complaint inspection · Health discipline

On , OSHA opened a complaint health inspection of FREEDOM METAL FINISHING, INC. in 5095 113TH AVE N, CLEARWATER, FL 33760 (NAICS 332813). OSHA activity number 344212907.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Freedom Metal Finishing, INC. — free Get an email when a new federal OSHA severe-injury report for Freedom Metal Finishing, INC. is published. One employer, no account, unsubscribe in one click.
Site address
5095 113TH AVE N
City
CLEARWATER
State
FL
ZIP
33760
Mailing
5095 113TH AVE N, CLEARWATER, FL 33760
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
332813
Employees
40
Ownership type
A

6 citations on file for this inspection.

1910.107 C04

Serious Gravity 5 1 instance 1 exposed
Issued
Feb 3, 2020
Abate by
Feb 28, 2020
Penalty
Initial $5,398 · Current $3,239 Reduced
29 CFR 1910.107(c)(4): Electrical wiring and equipment did not conform to the provisions of this paragraph and were not otherwise in accordance with subpart S of this part (Reference:  29 CFR 1910.307, Hazardous Locations):  a) Paint Booth - There were regular 110 volt AC outlets in use, on or about September 24, 2019.
Recent events (2)
  • — I (S) $3238.8
  • — Z (S) $5398

1910.107 C08

Serious Gravity 5 1 instance 1 exposed
Issued
Feb 3, 2020
Abate by
Feb 28, 2020
Penalty
Initial $0 · Current $0
29 CFR 1910.107(c)(8): Portable electric lamps shall not be used in any spraying area during spraying operations. Portable electric lamps, if used during cleaning or repairing operations, shall be of the type approved for hazardous Class I locations:  a) Paint Booth - Portable 120 volt AC electric lamps were used in the spraying area during spraying operations, on or about September 24, 2019.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.132 A

Serious Gravity 1 1 instance 6 exposed
Issued
Feb 3, 2020
Abate by
Feb 28, 2020
Penalty
Initial $4,048 · Current $2,429 Reduced
29 CFR 1910.132(a): Protective equipment was not used when necessary whenever hazards capable of causing injury and impairment were encountered:  a) Plating Area - A plater was not provided with any type of arm protection while handling parts in and out of corrosive baths, on or about September 24, 2019.
Recent events (2)
  • — I (S) $2428.8
  • — Z (S) $4048

1910.134 E01

Serious Gravity 1 1 instance 1 exposed
Issued
Feb 3, 2020
Penalty
Initial $4,048 · Current $2,429 Reduced
29 CFR 1910.134(e)(1): The employer did not provide a medical evaluation to determine the employee's ability to use a respirator, before the employee was fit tested or required to use the respirator in the workplace:    a) Spray Booth - An employee wearing a 3M 7503 half-face air purifying respirator, and over exposed to hexavalent chromium while painting, was not provided with a medical evaluation, on or about September 24, 2019.
Recent events (2)
  • — I (S) $2428.8
  • — Z (S) $4048

1910.1026 L02 I

Serious Gravity 5 1 instance 1 exposed
Issued
Feb 3, 2020
Abate by
Feb 28, 2020
Penalty
Initial $5,398 · Current $3,239 Reduced
29 CFR 1910.1026(l)(2)(i): The employer did not ensure that all employees who were assigned to workplaces where there was exposure to chromium (VI) were provided with information and training as required by the Hazard Communication standard, 29 CFR 1910.1200:    a) Paint Booth - The painter was over-exposed to hexavalent chromium as an 8-hour time weighted average was not trained. The employee had no knowledge of hexavalent chromium, on or about September 24, 2019.
Recent events (2)
  • — I (S) $3238.8
  • — Z (S) $5398

1910.107 B09

Other-than-serious 1 instance 1 exposed
Issued
Feb 3, 2020
Abate by
Feb 28, 2020
Penalty
Initial $0 · Current $0
29 CFR 1910.107(b)(9): A clear space of not less than 3 feet on all sides was not kept free from storage or combustible construction:  a) Paint Booth - There were tires, cardboard and other combustibles stored next to the booth, on or about September 24, 2019.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

View Freedom Metal Finishing, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344212907.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.