PATUXENT RIVER, MD —
OSHA Inspection: U.S. DEPARTMENT OF NAVY/NAVAL AIR SYSTEMS COMMAND
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of U.S. DEPARTMENT OF NAVY/NAVAL AIR SYSTEMS COMMAND in 22473 MILLSTONE ROAD, PATUXENT RIVER, MD 20670 (NAICS 928110). OSHA activity number 344215660.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- U.S. DEPARTMENT OF NAVY/NAVAL AIR SYSTEMS COMMAND
- Site address
- 22473 MILLSTONE ROAD
- City
- PATUXENT RIVER
- State
- MD
- ZIP
- 20670
- Mailing
- 47123 BUSE RD BLDG 2272, SUITE 540, PATUXENT RIVER, MD 20670
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 928110
- Employees
- 100
- Ownership type
- D
Citations
2 citations on file for this inspection.
1910.212 A02
- Issued
- Jan 30, 2020
- Abate by
- Feb 6, 2020
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.212(a)(2): Guard(s) on machine(s) were not affixed to the machine or secured elsewhere when attachment to the machine was not possible: (a) Airframe Bearings Lab, Constant Load Test Stands 1, 2 and 3: On or about August 6, the two guards covering the moving chains and sprockets on top of each piece of equipment were not affixed or secured to prevent removal while the equipment is being operated. In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the Certification of Corrective Action Worksheet), in addition, documentation demonstrating the abatement is complete must be included with your certification. This documentation may include but is not limited to evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (1)
- — Z (S) $0
1910.219 F03
- Issued
- Jan 30, 2020
- Abate by
- Feb 5, 2020
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.219(f)(3): Sprocket wheels and chains which were seven (7) feet or less above floors or platforms were not enclosed: (a) Airframe Bearings Lab, Constant Load Test Stand 1: On or about July 31, 2019, employee was exposed to the ingoing nip points of the chains and sprockets while operating the equipment without the guards in place. (b) Airframe Bearings Lab, Constant Load Test Stands 1, 2 and 3: On or about August 6, 2019, the expanded metal guards did not adequately protect employees in that the two guards on top had ½ inch openings located approximately ¼ inch from the chains and sprockets underneath. (c) Airframe Bearings Lab, Constant Load Test Stands 1, 2 and 3: On or about August 6, the expanded metal guards did not adequately protect employees in that the guards on the sides of the equipment had ½ inch openings located approximately 2 inches from the chains and sprockets underneath. (d) Airframe Bearings Lab, Constant Load Test Stands 1, 2 and 3: On or about August 6, the lower portion of each test stand had an opening in front that measured approximately 9-1/2 inches by 28-1/4 inches, exposing employees to the moving chains and sprockets underneath. In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the Certification of Corrective Action Worksheet), in addition, documentation demonstrating the abatement is complete must be included with your certification. This documentation may include but is not limited to evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (1)
- — Z (S) $0
More inspections in this industry (NAICS 928110)
More inspections in MD
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344215660.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.