BROOKLYN, NY —
OSHA Inspection: CITY RESTAURANT SUPPLIES INC.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of CITY RESTAURANT SUPPLIES INC. in 84 18TH STREET, BROOKLYN, NY 11232 (NAICS 332312). OSHA activity number 344218292.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- CITY RESTAURANT SUPPLIES INC.
- Site address
- 84 18TH STREET
- City
- BROOKLYN
- State
- NY
- ZIP
- 11232
- Mailing
- 84 18TH STREET, BROOKLYN, NY 11232
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332312
- Employees
- 9
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.243 C01
- Issued
- Feb 4, 2020
- Abate by
- Mar 10, 2020
- Penalty
- Initial $2,892 · Current $675 Reduced
General-duty citation text
29 CFR 1910.243(c)(1): Abrasive wheel(s) were used on portable grinder(s) which were not provided with safety guard(s) meeting the requirements specified in 29 CFR 1910.243(c)(1) through (c)(4)(a) Location: 84 18th Street, Brooklyn, NY. Machine Shop Area. a) Hand held grinders used in the machine shop area to polish edges of sheet metals had no guard. On or about 08/08/2019.
Recent events (2)
- — I (S) $675
- — Z (S) $2892
1910.212 A
- Issued
- Feb 4, 2020
- Abate by
- Apr 13, 2020
- Penalty
- Initial $4,048 · Current $975 Reduced
General-duty citation text
29 CFR 1910.212(a): One or more methods of machine guarding were not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: Location: 84 18th Street, Brooklyn, NY. Machine Shop Area. a) Employees used the Adira hydraulic press break equipment model number OHD-10030, Serial number 5725/10640 in the machine shop area to press and cut mild steel materials with no safe guard installed on the equipment. On or about 08/08/2019.
Recent events (2)
- — I (S) $975
- — Z (S) $4048
1910.305 J02
- Issued
- Feb 4, 2020
- Penalty
- Initial $2,892 · Current $675 Reduced
General-duty citation text
29 CFR 1910.305(j)(2): Receptacles, cord connectors, and attachment plugs (caps). Location: 84 18th Street, Brooklyn, NY. Receptacle installed to a black extension cord was not provided with a cover and live electrical wires were covered with black electrical tape and the equipment was not installed in a neat and workmanlike manner. On or about 08/08/2019.
Recent events (2)
- — I (S) $675
- — Z (S) $2892
1910.304 G05
- Issued
- Feb 4, 2020
- Penalty
- Initial $2,313 · Current $500 Reduced
General-duty citation text
29 CFR 1910.304(g)(5): Grounding path. The path to ground from circuits, equipment, and enclosures shall be permanent, continuous, and effective. Location: 84 18th Street, Brooklyn, NY. Shop Area. a) A black extension cord used to power equipment at the facility with three prong plugs and the ground pin was missing. On or about 08/08/2019.
Recent events (2)
- — I (S) $500
- — Z (S) $2313
1910.305 G02 II
- Issued
- Feb 4, 2020
- Penalty
- Initial $2,892 · Current $675 Reduced
General-duty citation text
29 CFR 1910.305(g)(2)(ii): Flexible cords were not used only in continuous lengths without splice or tap: LOCATION: 84 18th Street, Brooklyn, NY. Machine Shop Area. a) A black extension cord used to power hand held grinders at the facility was frayed and spliced together and patched with electrical tape. On or about 8/08/2019. Location: 84 18th Street, Brooklyn, NY. Machine Shop Area. b) The two prong hand held grinders were used in the machine shop area had frayed and spliced power cord and were patched with electrical tape. On or about 08/08/2019.
Recent events (2)
- — I (S) $675
- — Z (S) $2892
More inspections at City Restaurant Supplies INC.
View City Restaurant Supplies INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332312)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344218292.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.