COLORADO SPRINGS, CO —
OSHA Inspection: ELSARA ENTERPRISES, INC DBA ANCONA JOB SHOP, INC
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of ELSARA ENTERPRISES, INC DBA ANCONA JOB SHOP, INC in 230 DELAWARE STREET, COLORADO SPRINGS, CO 80907 (NAICS 811310). OSHA activity number 344221262.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- ELSARA ENTERPRISES, INC DBA ANCONA JOB SHOP, INC
- Site address
- 230 DELAWARE STREET
- City
- COLORADO SPRINGS
- State
- CO
- ZIP
- 80907
- Mailing
- 230 DELAWARE STREET, COLORADO SPRINGS, CO 80907
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 811310
- Employees
- 12
- Ownership type
- A
Citations
11 citations on file for this inspection.
1910.134 E01
- Issued
- Oct 28, 2019
- Abate by
- Dec 2, 2019
- Penalty
- Initial $2,273 · Current $1,364 Reduced
General-duty citation text
29 CFR 1910.134(e)(1): The employer did not provide a medical evaluation to determine the employee's ability to use a respirator, before the employee was fit tested or required to use the respirator in the workplace: (a) On or about August 8, 2019, and at times prior, an employee who voluntarily wore a respirators while performing work tasks, was exposed to the hazards of wearing a respirator without having a medical evaluation in advance to ensure that the employee was medically able to use the respirator. Abatement Note: Abatement certification is required for this item (see enclosed "Certification of Corrective Action Worksheet").
Recent events (2)
- — I (S) $1364
- — Z (S) $2273
1910.134 H01
- Issued
- Oct 28, 2019
- Abate by
- Dec 2, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(h)(1): Respirators were not cleaned and disinfected using the procedures in Appendix B-2 of 29 CFR 1910.134 or equivalent procedures recommended by the respirator manufacturer: (a) On or about August 8, 2019, and at times prior, the employer did not ensure that an employee who voluntarily wore a respirators while performing work tasks, was protected from the hazards of inhaling contaminants in that the respirator was not properly cleaned and disinfected. Abatement Note: Abatement certification is required for this item (see enclosed "Certification of Corrective Action Worksheet").
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.134 H03 I A
- Issued
- Oct 28, 2019
- Abate by
- Dec 2, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(h)(3)(i)(A): Respirators used in routine situations were not inspected before each use and during cleaning: (a) On or about August 8, 2019, and at times prior, the employer did not ensure that the respirator used by an employee who voluntarily wore the respirator during work tasks, was inspected before each use and during cleaning. Abatement Note: Abatement certification is required for this item (see enclosed "Certification of Corrective Action Worksheet").
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.134 K06
- Issued
- Oct 28, 2019
- Abate by
- Dec 2, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(k)(6): The employer did not provide the basic advisory information on respirators, as presented in Appendix D of 29 CFR 1910.134, in written or oral format to employees who wear respirators when such use was not required by the employer: (a) On or about August 8, 2019, and at times prior, an employee who voluntarily wore a respirators while performing work tasks, was exposed to the hazards of wearing a respirator without being provided information on those hazards and the actions to take to minimize the hazards, as provided in Appendix D of this standard. Abatement Note: Abatement certification is required for this item (see enclosed "Certification of Corrective Action Worksheet").
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.147 C01
- Issued
- Oct 28, 2019
- Abate by
- Dec 2, 2019
- Penalty
- Initial $2,273 · Current $0 Reduced
General-duty citation text
29 CFR 1910.147(c)(1): The employer did not establish a program consisting of an energy control procedure, employee training and periodic inspections to ensure that before any employee performed any servicing or maintenance on a machine or equipment where the unexpected energizing, startup or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source and rendered inoperative: (a) On or about August 8, 2019, and at times prior, employees were exposed to amputation, caught-in and struck-by hazards while performing maintenance on machinery and equipment in the shop, without a program to control hazardous energy, or specific procedures to follow for each machine. Hazardous machinery and equipment includes but is not limited to the Scotchman ironworker, Scotchman cold saw, Ellis band saw, and the Miller welders. Abatement Note: Abatement certification is required for this item (see enclosed "Certification of Corrective Action Worksheet").
Recent events (2)
- — I (S) $0
- — Z (S) $2273
1910.178 L04 III
- Issued
- Oct 28, 2019
- Abate by
- Nov 15, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(l)(4)(iii): An evaluation of each powered industrial truck operator's performance was not being conducted at least once every three years: (a) On or about August 8, 2019, and at times prior, employees were exposed to hazards of forklift operation in that the operator performance was not reevaluated every three years. Abatement Note: Abatement certification is required for this item (see enclosed "Certification of Corrective Action Worksheet").
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.215 A04
- Issued
- Oct 28, 2019
- Abate by
- Nov 15, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.215(a)(4): Work rest(s) on grinding machinery were not adjusted closely to the wheel with a maximum opening of one eighth inch: (a) On or about August 8, 2019, and at times prior, employees were exposed to caught in and struck-by hazard in that the work rest of the Central Machinery 8-inch bench grinder was not adjusted close enough to the grinding wheel. Abatement Note: Abatement certification is required for this item (see enclosed "Certification of Corrective Action Worksheet").
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.215 B09
- Issued
- Oct 28, 2019
- Abate by
- Nov 15, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch: (a) On or about August 8, 2019, and at times prior, employees were exposed to struck-by hazard in that the tongue guard of the Central Machinery 8-inch bench grinder, was missing. Abatement Note: Abatement certification is required for this item (see enclosed "Certification of Corrective Action Worksheet").
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.303 B02
- Issued
- Oct 28, 2019
- Abate by
- Nov 15, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.303(b)(2): Listed or labeled electrical equipment was not used or installed in accordance with instructions included in the listing or labeling: (a) On or about August 8, 2019, and at times prior, an employee was exposed to fire hazards in that two extension cords were plugged into one another and powered a DeWalt hand held angle grinder (the system was daisy chained), at the center welding station. Abatement Note: Abatement certification is required for this item (see enclosed "Certification of Corrective Action Worksheet").
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.334 A02 II
- Issued
- Oct 28, 2019
- Abate by
- Nov 15, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.334(a)(2)(ii): There was a defect or evidence of damage that could have exposed an employee to injury and the defective or damaged item was not removed from service and an employee was using it before repairs and tests necessary to render the equipment safe were made: (a) On or about August 8, 2019, and at times prior, an employee was exposed to shock when using the DeWalt angle grinder at the middle welding station, that was powered by an extension cord that was broken, exposing the energized conductors inside. Abatement Note: Abatement certification is required for this item (see enclosed "Certification of Corrective Action Worksheet").
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.1200 E01
- Issued
- Oct 28, 2019
- Abate by
- Nov 15, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met: (a) On or about August 8, 2019, and at times prior, employees were exposed to hazardous chemicals and did not have a hazard communication program to reference or follow to ensure their safety while handling and using the chemicals. Chemicals on site include, but are not limited to, xylene (flammable; skin irritant; serious eye irritant; respiratory irritant; damage to CNS, kidney and liver), Tide laundry detergent (used off label, use includes skin contact; eye damage and irritation; skin irritation), propane (flammable; frostbite; oxygen displacement can cause rapid suffocation), oxygen (flammable; combustible); acetylene (flammable; oxygen displacement can cause rapid suffocation); and Hi Holdout Gray Primer (brain and nervous system damage; possible carcinogen). Abatement Note: Abatement certification is required for this item (see enclosed "Certification of Corrective Action Worksheet").
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Elsara Enterprises, INC DBA Ancona JOB Shop, INC
View Elsara Enterprises, INC DBA Ancona JOB Shop, INC's full OSHA safety record →
More inspections in this industry (NAICS 811310)
More inspections in CO
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344221262.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.