OSHA Inspection: ENTECH SALES AND SERVICE LLC

Issued

2019-12-26 00:00:00

Abate by

2020-01-10 00:00:00

Penalty

Initial $11366.00 · Current $7000.00 Reduced

General-duty citation text

29 CFR 1910.332(b)(1): Employees were not trained in and familiar with the safety-related work practices required by 1910.331 through 1910.335 that pertained to their respective job assignments:    Fire Riser Room, FACP, FDC; 10010 San Pedro office Building:  On or about August 08, 2019 and at times prior thereto, employees performing load bank testing on an energized alternating terminal switch were exposed to electrical hazards and were not provided training by the employer to ensure understanding of the type and magnitude of energy being worked with and the methods and means needed for energy isolation and control.

Issued

2019-12-26 00:00:00

Abate by

2020-01-10 00:00:00

Penalty

Initial $11366.00 · Current $7000.00 Reduced

General-duty citation text

29 CFR 1910.333(b)(2): While an employee was exposed to contact with parts of fixed electric equipment or circuits which were deenergized, the circuits energizing the parts were not locked out or tagged or both in accordance with the requirements of this paragraph (b) of 29 CFR 1910.333(b)(2):      Fire Riser Room, FACP, FDC; 10010 San Pedro office building:  On or about August 08, 2019, and at times prior thereto, employees performing load bank testing on an alternating terminal switch were exposed to electrical hazards, and had not ensured the generator powering the alternating terminal switch had been effectively locked out and tagged prior to performing the load bank test.

Issued

2019-12-26 00:00:00

Abate by

2020-01-10 00:00:00

Penalty

Initial $11366.00 · Current $5000.00 Reduced

General-duty citation text

29 CFR 1910.335(a)(1)(i): Employees working in areas where there were potential electrical hazards were not using electrical protective equipment that was appropriate for the specific parts of the body to be protected and for the work to be performed:      Fire Riser Room, FACP, FDC; 10010 San Pedro Office Building: On or about August 08, 2019 and at times prior thereto, employees were exposed to electrical hazards while performing load bank testing procedures on an alternating terminal switch without adequate personal protective equipment such as but not limited to insulated gloves, arc flash jackets and coveralls, and arc flash gaiters.

Issued

2019-12-26 00:00:00

Abate by

2020-01-10 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.335(a)(1)(v): Employees exposed to the danger of injury to the eyes or face from electric arcs or flashes or from flying objects resulting from electrical explosion did not wear protective equipment for the eyes or face:   Fire Riser Room, FACP, FDC; 10010 San Pedro Office Building:  On or about August 08, 2019 and at times prior thereto, employees were exposed to electrical hazards while performing load bank testing procedures on an alternating terminal switch without wearing adequate personal protective equipment such as but not limited to arc flash hoods, arc flash helmets and arc flash visors.

Issued

2019-12-26 00:00:00

Abate by

2020-01-15 00:00:00

Penalty

Initial $11366.00 · Current $5000.00 Reduced

General-duty citation text

29 CFR 1910.335(a)(2)(i): When working near exposed energized conductors or circuit parts, each employee did not use insulated tools or handling equipment when the tools or handling equipment might have made contact with such conductors or parts:    Fire Riser Room, FACP, FDC; 10010 San Pedro Office Building:  On or about August 08, 2019 and at times prior thereto, employees were exposed to electrical hazards while performing load bank testing procedures on an alternating terminal switch while using non-insulated hand tools such as but not limited to Husky screwdrivers and wrenches, wire cutters, and craftsman wrenches.