HARRISONVILLE, MO —
OSHA Inspection: MC POWER COMPANIES
Federal Agency inspection · Safety discipline
At a glance
On , OSHA opened a federal Agency safety inspection of MC POWER COMPANIES in 1607 ANACONDA RD, HARRISONVILLE, MO 64701 (NAICS 238210). OSHA activity number 344226196.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- MC POWER COMPANIES
- Site address
- 1607 ANACONDA RD
- City
- HARRISONVILLE
- State
- MO
- ZIP
- 64701
- Mailing
- 4031 NE LAKEWOOD WAY, LEES SUMMIT, MO 64064
What kind of inspection was it?
- Inspection type
- Federal Agency (M)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238210
- Employees
- 3
- Ownership type
- A
Citations
4 citations on file for this inspection.
1926.20 B02
- Issued
- Nov 26, 2019
- Abate by
- Dec 23, 2019
- Penalty
- Initial $9,282 · Current $5,105 Reduced
8870
General-duty citation text
29 CFR 1926.20(b)(2): The employer did not initiate and maintain programs which provided for frequent and regular inspections of the job site, materials and equipment to be made by a competent person(s): The employer is failing to protect employees from hazards such as but not limited to falls, electrocution, struck by and caught between. This was most recently documented on August 12, 2019 at the jobsite located at 1607 Anaconda Road, Harrisonville, Missouri. The employer did not initiate and maintain a program which provided for regular inspections of the job site which allowed an employee to perform work in the area of live electrical equipment. The employee sustained fatal injuries after contacting the energized electrical component.
Recent events (2)
- — I (S) $5105.1
- — Z (S) $9282
1926.416 A01
- Issued
- Nov 26, 2019
- Abate by
- Dec 23, 2019
- Penalty
- Initial $9,282 · Current $5,105 Reduced
8870
General-duty citation text
29 CFR 1926.416(a)(1): Employees were permitted to work in proximity to electric power circuits and were not protected against electric shock by de-energizing and grounding the circuits or effectively guarding the circuits by insulation or other means: The employer is failing to protect employees from electrical shock and electrocution hazards when upgrading lighting fixtures throughout the facility. This was most recently documented on August 9, 2019 at the jobsite located at 1607 Anaconda Road, Harrisonville, Missouri. An employee working on a 110-volt energized circuit, which had not been rendered inoperative or guarded by insulation or other means, was shocked resulting in fatal injuries.
Recent events (2)
- — I (S) $5105.1
- — Z (S) $9282
1926.417 A
- Issued
- Nov 26, 2019
- Abate by
- Dec 23, 2019
- Penalty
- Initial $9,282 · Current $5,105 Reduced
8870
General-duty citation text
29 CFR 1926.417(a): Controls that were to be deactivated during the course of work on energized or de-energized equipment or circuits were not tagged: The employer is failing to protect employees from electrocution hazards associated from a circuit breaker which was not locked out during installation of a new light fixture between the hot and the cold water liquid storage tanks. This was most recently documented on August 9, 2019 at the jobsite located at 1607 Anaconda Road, Harrisonville, Missouri. An employee was shocked and fatally injured while working with a 110 volt energized conductor that was not rendered inoperative or guarded and was not tagged.
Recent events (2)
- — I (S) $5105.1
- — Z (S) $9282
1926.417 C
- Issued
- Nov 26, 2019
- Abate by
- Dec 23, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.417(c): Tags were not placed to identify plainly the equipment or circuits being worked on: The employer is failing to protect employees from electrocution hazards associated from a circuit breaker which was not tagged out during installation of a new light fixture between the hot and the cold liquid storage tanks. This was most recently documented on August 9, 2019 at the jobsite located at 1607 Anaconda Road, Harrisonville, Missouri. An employee was shocked and fatally injured while working with a 110 volt energized conductor that was not rendered inoperative or guarded.
Recent events (2)
- — I (S) $0
- — Z (S) $0
More inspections at MC Power Companies
View MC Power Companies's full OSHA safety record →
More inspections in this industry (NAICS 238210)
More inspections in MO
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344226196.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.