Safety Incidents OSHA Severe Injury Reports · 2015–2025
3,913,242Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

OSHA Inspection: SILBINO FERNANDEZ DBA SILBINO FERNANDEZ

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of SILBINO FERNANDEZ DBA SILBINO FERNANDEZ in 5296 N. NORTHWEST HWY., CHICAGO, IL 60630 (NAICS 238140). OSHA activity number 344229414.

Watch Silbino Fernandez DBA Silbino Fernandez — free Get an email when a new federal OSHA severe-injury report for Silbino Fernandez DBA Silbino Fernandez is published. One employer, no account, unsubscribe in one click.
Site address
5296 N. NORTHWEST HWY.
City
CHICAGO
State
IL
ZIP
60630
Mailing
15843 LOOMIS AVE., HARVEY, IL 60426
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238140
Employees
3
Ownership type
A

5 citations on file for this inspection.

1926.451 B01

Serious Gravity 10 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $3978.00 · Current $2400.00 Reduced
29 CFR 1926.451(b)(1): Each platform on all working levels of scaffolds was not fully planked or decked between the front uprights and the guardrail supports as specified in paragraphs 1926.451(b)(1)(i)-(ii):      a)  On August 5, 2019, employees were exposed to the hazard of falling approximately 25 feet to the ground, while performing masonry work from tubular welded frame scaffold platform that was not fully planked.     In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (2)
  • — I (S) $2400
  • — Z (S) $3978

1926.451 G01

Serious Gravity 10 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1926.451(g)(1): Each employee on a scaffold more than 10 feet above a lower level was not protected from falling to that lower level.  a)  On August 5, 2019, employees were exposed to the hazard of falling approximately 25 feet to the ground, while performing masonry work from a tubular welded frame scaffold platform.   In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1926.451 F06

Serious Gravity 5 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $2842.00 · Current $1700.00 Reduced
29 CFR 1926.451(f)(6): Scaffolds were erected, used, dismantled, altered, or moved such that they, or any conductive material handled on them, could have come closer than the minimum distances established for specific voltages as set forth in the table in subparagraph (f)(6):       a)  On August 5, 2019, employees were not protected against accidental contact with energized overhead power lines servicing the street lights while performing masonry work from a tubular welded frame scaffold platform.       In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
  • — I (S) $1700
  • — Z (S) $2842

1926.454 A

Serious Gravity 5 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $2842.00 · Current $1700.00 Reduced
29 CFR 1926.454(a): The employer did not have each employee who performed work while on a scaffold trained by a person qualified in the subject matter to recognize the hazards associated with the type of scaffold being used and to understand the procedures to control or minimize those hazards:    a)  On or about August 5, 2019, the employer did not provide training to each employee in order to recognize hazards associated with working from tubular welded frame scaffolding and to understand procedures to control or minimize those hazards.    In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
  • — I (S) $1700
  • — Z (S) $2842

1926.1053 B01

Serious Gravity 5 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $2842.00 · Current $1700.00 Reduced
29 CFR 1926.1053(b)(1): Portable ladders were used for access to an upper landing surface and the ladder side rails did not extend at least 3 feet (.9 m) above the upper landing surface to which the ladder was used to gain access:       a)  On August 5, 2019, a section of an extension ladder used by employees to access and egress the roof was not long enough to have its side rails extended at least 3 feet above the parapet wall.      In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
  • — I (S) $1700
  • — Z (S) $2842

View SILBINO FERNANDEZ DBA SILBINO FERNANDEZ's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344229414.