CEDAR HILL, TX —
OSHA Inspection: DELTA STEEL INC.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of DELTA STEEL INC. in 1585 EDGEFIELD WAY, CEDAR HILL, TX 75104 (NAICS 331210). OSHA activity number 344237193.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- DELTA STEEL INC.
- Site address
- 1585 EDGEFIELD WAY
- City
- CEDAR HILL
- State
- TX
- ZIP
- 75104
- Mailing
- 1585 EDGEFIELD WAY, CEDAR HILL, TX 75104
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 331210
- Employees
- 54
- Ownership type
- A
Citations
3 citations on file for this inspection.
1910.22 A01
- Issued
- Dec 13, 2019
- Abate by
- Dec 26, 2019
- Penalty
- Initial $11,934 · Current $7,000 Reduced
General-duty citation text
29 CFR 1910.37(a)(1): Maintenance, safeguards, and operational features for exit routes. (a) The danger to employees must be minimized. (!) Exit routes must be kept free of explosive or highly flammable furnishings or other decorations. a) On or about August 12, 2019 at the job site, the employer did not ensure that the passageways were kept clean and orderly exposing employees to related hazards.
Recent events (3)
- — F (O) $7000
- — C (S) $11934
- — Z (S) $11934
1910.176 B
- Issued
- Dec 13, 2019
- Abate by
- Dec 26, 2019
- Penalty
- Initial $11,934 · Current $7,000 Reduced
General-duty citation text
29 CFR 1910.30(a)(3): Training requirements (a) fall hazards. (3) The employer must train each employee in at least the following topics: (i) The nature of the fall hazards in the work area and how to recognize them; (ii) The procedures to be followed to minimize those hazards; (iii) The correct procedures for installing, inspecting, operating, maintaining, and disassembling the personal fall protection system that the employee uses; and (iv) The correct use of personal fall protection systems and equipment specified in paragraph (a)(1) of this section, including nut not limited to, proper hook-up, anchoring, and tie-off techniques, and methods of equipment inspection and storage, as specified by the manufacturer. On or about August 2, 2019, in the warehouse; where steel beams were stacked up in tiers, the employer did not ensure that employees were trained on the use of fall protection systems exposing employees to fall hazards.
Recent events (3)
- — F (O) $7000
- — C (S) $11934
- — Z (S) $11934
1910.179 J01 II B
- Issued
- Dec 13, 2019
- Abate by
- Dec 26, 2019
- Penalty
- Initial $8,525 · Current $0 Reduced
General-duty citation text
29 CFR 1910.179(j)(1)(ii): The employer did not performed frequent and periodic inspections as defined in paragraphs (a) and (b) of this section: a) The employer did not ensure that daily inspection of cranes are conducted. This violation occurred on or about August 2, 2019, when employee operated OMI crane, SN: 14029-2 without daily inspection.
Recent events (2)
- — I (S) $0
- — Z (S) $8525
More inspections at Delta Steel INC.
View Delta Steel INC.'s full OSHA safety record →
More inspections in this industry (NAICS 331210)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344237193.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.