Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: ANGEL CONSTRUCTION, LLC

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of ANGEL CONSTRUCTION, LLC in 5819 SYLVESTER ST. LOT 503, PASCAGOULA, MS 39563 (NAICS 238130). OSHA activity number 344274386.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Angel Construction, LLC — free Get an email when a new federal OSHA severe-injury report for Angel Construction, LLC is published. One employer, no account, unsubscribe in one click.
Site address
5819 SYLVESTER ST. LOT 503
City
PASCAGOULA
State
MS
ZIP
39563
Mailing
P.O. BOX 7514, GULFPORT, MS 39506
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238130
Employees
7
Ownership type
A

5 citations on file for this inspection.

1926.25 A

Serious Gravity 1 1 instance 3 exposed
Issued
Oct 30, 2019
Abate by
Jan 15, 2020
Penalty
Initial $1,705 · Current $938 Reduced
29 CFR 1926.25(a): During the course of construction, alteration, or repairs, form and scrap lumber with protruding nails, and all other debris, shall be kept cleared from work areas, passageways, and stairs, in and around buildings or other structures.    (a) Jobsite - On or about August 28, 2019 the jobsite was not cleared of wooden planks and sheets, exposing employees to slips, trips, and fall hazards.
Recent events (2)
  • — I (S) $937.75
  • — Z (S) $1705

1926.100 A

Serious Gravity 5 1 instance 1 exposed
Issued
Oct 30, 2019
Abate by
Jan 15, 2020
Penalty
Initial $2,273 · Current $1,250 Reduced
29 CFR 1926.100(a): Employees were not protected by protective helmets while working in areas where there was a possible danger of head injury from impact, or from falling or flying objects, or from electrical shock and burns:    (a) Jobsite - On or about August 28, 2019 employees working at the ground level were not wearing hardhats, exposing employees to struck-by hazards from overhead tools and materials.
Recent events (2)
  • — I (S) $1250.15
  • — Z (S) $2273

1926.102 A01

Serious Gravity 10 1 instance 1 exposed
Issued
Oct 30, 2019
Abate by
Jan 15, 2020
Penalty
Initial $0 · Current $0
29 CFR 1926.102(a)(1): The employer did not ensure that each affected employee used appropriate eye or face protection when exposed to eye or face hazards from flying particles, molten metal, liquid chemicals, acids or caustic liquids, chemical gases or vapors, or potentially injurious light radiation.    (a) Jobsite - On or about August 28, 2019 an employee using a nail gun was not wearing eye protection, exposing them to being struck by hazards from flying particles.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1926.501 B11

Serious Gravity 10 1 instance 2 exposed
Issued
Oct 30, 2019
Abate by
Jan 15, 2020
Penalty
Initial $3,978 · Current $2,188 Reduced
29 CFR 1926.501(b)(11): Each employee on a steep roof with unprotected sides and edges 6 feet (1.8 m) or more above lower levels was not protected from falling by guardrail systems with toeboards, safety net systems or personal fall arrest systems:    (a) Jobsite - On or about August 28, employees working on a roof more than 6 feet above the lower level did not have a means of fall protection, exposing them to fall hazards.
Recent events (2)
  • — I (S) $2187.9
  • — Z (S) $3978

1926.503 A01

Serious Gravity 10 1 instance 2 exposed
Issued
Oct 30, 2019
Abate by
Jan 15, 2020
Penalty
Initial $0 · Current $0
29 CFR 1926.503(a)(1): A training program was not provided to each employee who might be exposed to fall hazards, to enable that employee to recognize the hazards of falling, and be trained in the procedures to be followed to minimize these hazards:    (a) Jobsite - On or about August 28, 2019 the employer did not ensure that each employee received fall protection training before allowing them to perform roofing work above 6 feet in height with no fall protection exposing employees to fall hazards.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

View Angel Construction, LLC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344274386.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.