RONKONKOMA, NY —
OSHA Inspection: DAVINCI CONSTRUCTION OF NEW YORK, INC.
Unprogrammed Related inspection · Safety discipline
At a glance
On , OSHA opened an unprogrammed Related safety inspection of DAVINCI CONSTRUCTION OF NEW YORK, INC. in 1 MILL ROAD, RONKONKOMA, NY 11779 (NAICS 236220). OSHA activity number 344276845.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- DAVINCI CONSTRUCTION OF NEW YORK, INC.
- Site address
- 1 MILL ROAD
- City
- RONKONKOMA
- State
- NY
- ZIP
- 11779
- Mailing
- 970 MONTAUK HIGHWAY, WEST ISLIP, NY 11795
What kind of inspection was it?
- Inspection type
- Unprogrammed Related (G)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 236220
- Employees
- 14
- Ownership type
- A
Citations
4 citations on file for this inspection.
1926.451 G01 VII
- Issued
- Nov 15, 2019
- Penalty
- Initial $4,168 · Current $700 Reduced
General-duty citation text
29 CFR 1926.451(g)(1)(vii): Each employee on a scaffold, not otherwise specified in paragraphs (g)(1)(i) through (g)(1)(vi) of this section, more than 10 feet (3.1 m) above lower level was not protected from falls by the use of personal fall arrest systems or guardrail systems meeting the requirements of paragraph (g)(4) of this section. a) Worksite, 1 Mill Road, Ronkonkoma, New York: Employees were exposed to falling approximately 20 feet while installing Tyvek working from a wood job made scaffold, on or about 8/30/19. Note: Because abatement of this violation is already documented in the case file, the employer need not submit certification or documentation of abatement for this violation as normally required by CFR 1903.19.
Recent events (3)
- — F (S) $700
- — C (S) $4168
- — Z (S) $4168
1926.451 B01
- Issued
- Nov 15, 2019
- Abate by
- Nov 21, 2019
- Penalty
- Initial $4,168 · Current $700 Reduced
General-duty citation text
29 CFR 1926.451(b)(1): Each platform on all working levels of scaffolds was not fully planked or decked between the front uprights and the guardrail supports as specified in paragraphs 1926.451(b)(1)(i)-(ii) a) Worksite, 1 Mill Road, Ronkonkoma, New York: Employees were working on an wood job made scaffold that was missing planks, on or about 8/30/19. Note: In addition to abatement certification, the employer is required to submit abatement documentation for this item in accordance with 29 CFR 1903.19.
Recent events (3)
- — F (S) $700
- — C (S) $4168
- — Z (S) $4168
1926.1053 B04
- Issued
- Nov 15, 2019
- Penalty
- Initial $3,334 · Current $600 Reduced
General-duty citation text
29 CFR 1926.1053(b)(4): Ladder(s) were used for purposes other than the purpose for which they were designed. a) Worksite, 1 Mill Road, Ronkonkoma, New York: Employees were accessing the work area by using a 6 foot A-frame ladder leaned against the scaffold in the closed position, on or about 8/30/19. Note: Because abatement of this violation is already documented in the case file, the employer need not submit certification or documentation of abatement for this violation as normally required by CFR 1903.19.
Recent events (3)
- — F (S) $600
- — C (S) $3334
- — Z (S) $3334
1926.1053 B01
- Issued
- Nov 15, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.1053(b)(1): Where portable ladders were used for access to an upper landing surface and the ladder's length allows, the ladder side rails did not extend at least 3 feet (.9 m) above the upper landing surface being accessed a) Worksite, 1 Mill Road, Ronkonkoma, New York: Employees were using an a-frame ladder that was approximately 6 feet tall to access an elevated working platform that was approximately 6 feet tall. The ladder did not extend 3 feet above the platform nor was the ladder secured to the top of the elevated platform, on or about 8/30/19. Note: Because abatement of this violation is already documented in the case file, the employer need not submit certification or documentation of abatement for this violation as normally required by CFR 1903.19.
Recent events (3)
- — F (S) $0
- — C (S) $0
- — Z (S) $0
More inspections at Davinci Construction of NEW York, INC.
View Davinci Construction of NEW York, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 236220)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344276845.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.