Safety Incidents OSHA Severe Injury Reports · 2015–2025
4,113,118Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

OSHA Inspection: CAMRRA LLC.

Federal Agency inspection · Safety discipline

On , OSHA opened a federal Agency safety inspection of CAMRRA LLC. in 5525 LOCUST VALLEY ROAD, COOPERSBURG, PA 18036 (NAICS 713910). OSHA activity number 344277975.

Watch Camrra LLC. — free Get an email when a new federal OSHA severe-injury report for Camrra LLC. is published. One employer, no account, unsubscribe in one click.
Establishment
CAMRRA LLC.
Site address
5525 LOCUST VALLEY ROAD
City
COOPERSBURG
State
PA
ZIP
18036
Mailing
5525 LOCUST VALLEY ROAD, COOPERSBURG, PA 18036
Inspection type
Federal Agency (M)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
713910
Employees
14
Ownership type
A

1 citation on file for this inspection.

5(a)(1)

Serious Gravity 10 1 instance 6 exposed
Issued
Abate by
Penalty
Initial $13494.00 · Current $5800.00 Reduced
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees from crushing injuries as a result of a rollover of a rollover of a grass mower.     a) 5525 Locust Valley Road, Coopersburg, PA, 18036- Locust Valley Golf Course, 9th Tee Box: On or about September 3, 2019, an employee operated a Toro Greensmaster 3100 riding greens mower during hours of darkness, in wet conditions, in the vicinity of a drop off or embankment with a downward slope of between 5 to 30 degrees       Abatement Note:  Among other feasible means of abatement, the employer must operate this type of mower in accordance with the equipment operators manual and ANSI/OPEI B71.1-2012, Consumer Turf Care Equipment - Pedestrian-Controlled Mowers and Ride-On Mowers - Safety Specifications, states:    Section I, General Operation:  13. Operate machine only in daylight or good artificial light.      Section II, Slope Operation:: 1. Mow up and down slopes, not across. 2. Watch for holes, ruts, bumps, rocks, or other hidden objects. Uneven terrain could overturn the machine. Tall grass can hide obstacles. 4. Do not mow on wet grass. Tires may lose traction.  6. Avoid starting, stopping, or turning on a slope. If the tires lose traction, disengage the blade(s) and proceed slowly straight down the slope.  7. Keep all movement on slopes slow and gradual. Do not make sudden changes in speed or direction, which could cause the machine to roll over.  10. Do not mow near drop offs, ditches or embankments. The machine could suddenly roll over if a wheel goes over the edge or if the edge caves in.    Additionally, the Operator's Manual from the Manufacturer states in the Operation section:    2. Mow only in daylight or in good artificial light. 4. Do not use on slopes of more than: " Never mow side hills over 5° " Never mow uphill over 10° " Never mow downhill over 15° 5. Remember there is no such thing as a "safe" slope. Travel on grass slopes requires particular care. To guard against overturning: " Never mow across the face of the slope, unless the lawn mower is designed for this purpose.    Alternatively, the employer can choose to utilize mower equipment designed for use in areas with gradients exceeding near level and during periods of sufficient lighting.  Safe operations guidance for use near slopes is found in Figure 8, Section II of ANSI/OPEI B71.1-2012.
Recent events (3)
  • — F (S) $5800
  • — C (S) $13494
  • — Z (S) $13494

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344277975.