TARPON SPRINGS, FL —
OSHA Inspection: CONCRETE MODULAR SYSTEM INC
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of CONCRETE MODULAR SYSTEM INC in 700 BRADY ROAD, TARPON SPRINGS, FL 34689 (NAICS 238110). OSHA activity number 344279492.
What this inspection record means
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Watch Concrete Modular System INC — free
Get an email when a new federal OSHA severe-injury report for Concrete Modular System INC is published. One employer, no account, unsubscribe in one click.
Where did this inspection happen?
- Establishment
- CONCRETE MODULAR SYSTEM INC
- Site address
- 700 BRADY ROAD
- City
- TARPON SPRINGS
- State
- FL
- ZIP
- 34689
- Mailing
- 700 BRADY ROAD, TARPON SPRINGS, FL 34689
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238110
- Employees
- 15
- Ownership type
- A
Citations
8 citations on file for this inspection.
1910.178 L01 II
- Issued
- Feb 7, 2020
- Abate by
- Mar 5, 2020
- Penalty
- Initial $5,398 · Current $3,000 Reduced
General-duty citation text
29 CFR 1910.178(l)(1)(ii): The employer did not ensure that each operator had successfully completed the training required by paragraph (l), except as permitted by paragraph (l)(5), prior to permitting an employee to operate a powered industrial truck (a) Concrete Modular System, 700 Brady St., on or about August 29, 2019, Employees were exposed to struck-by hazards, in that, the employer did not provide forklift operator training for forklift drivers.
Recent events (2)
- — I (S) $3000
- — Z (S) $5398
1910.178 P01
- Issued
- Feb 7, 2020
- Abate by
- Mar 5, 2020
- Penalty
- Initial $5,398 · Current $4,000 Reduced
General-duty citation text
29 CFR 1910.178(p)(1): Powered industrial truck(s) found to be in need of repair, defective, or in any way unsafe had not been taken out of service until restored to safe operating condition(s): (a) Concrete Modular System, 700 Brady St., on or about August 29, 2019, the employer failed to remove from service the Yale Model GLCO40AFNUAE082, serial number N570831 that had defective seatbelt exposing employees to a struck by and/or crush hazard.
Recent events (2)
- — I (S) $4000
- — Z (S) $5398
1910.179 L03 I
- Issued
- Feb 7, 2020
- Abate by
- Mar 5, 2020
- Penalty
- Initial $5,398 · Current $0 Reduced
General-duty citation text
29 CFR 1910.179(l)(3)(i): Unsafe condition(s) disclosed during the frequent or periodic inspection(s) required by 29 CFR 1910.179(j) were not corrected before operation of the crane(s) was resumed: (a) Concrete Modular System, 700 Brady St., on or about August 29, 2019, the employer failed to remove from service the Mi Jack Travelift 650 gantry crane. The brakes for the rubber tired gantry crane are inoperative exposing employees to a struck by and/or crush hazard.
Recent events (2)
- — I (S) $0
- — Z (S) $5398
1910.212 A01
- Issued
- Feb 7, 2020
- Abate by
- Mar 5, 2020
- Penalty
- Initial $5,398 · Current $4,000 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: (a) Concrete Modular System, 700 Brady St., on or about August 29, 2019, employees are exposed to an amputation hazard, in that, the employer allowed employees to utilize a Dewalt chop saw without a lower blade guard to cut rebar.
Recent events (2)
- — I (S) $4000
- — Z (S) $5398
1910.213 C01
- Issued
- Feb 7, 2020
- Abate by
- Mar 5, 2020
- Penalty
- Initial $5,398 · Current $3,000 Reduced
General-duty citation text
29 CFR 1910.213(c)(1): Circular handfed ripsaw(s) were not guarded by an automatically adjusting hood which completely enclosed that portion of the saw above the table and above the material being cut: (a) Concrete Modular System, 700 Brady St., on or about August 29, 2019, the employer failed to ensure that the blade of the Rigid 10 in. compact table saw, serial # GW18252D1C44812 was guarded with a hood. Operators were exposed to an amputation hazard while cutting wood shims. (b) Concrete Modular System, 700 Brady St., on or about August 9, 2019, the employer failed to ensure that the blade of the Dewalt 10 in. compact table saw, was guarded with a hood. Operators were exposed to an amputation hazard while cutting wood shims.
Recent events (2)
- — I (S) $3000
- — Z (S) $5398
1910.243 C03
- Issued
- Feb 7, 2020
- Abate by
- Apr 4, 2020
- Penalty
- Initial $5,398 · Current $3,000 Reduced
General-duty citation text
29 CFR 1910.243(c)(3): Abrasive wheels used on vertical portable grinder(s) (right angle head grinders) were not provided with safety guard(s) having a maximum exposure angle of 180 degrees and located between the operator and wheel: (a) Concrete Modular System, 700 Brady St., on or about August 29, 2019, employees are exposed to an amputation hazard, in that, the employer allowed employees to utilize three Dewalt model DWE402, 4 and 1/2" portable angle grinders without a guards installed to cut steel rebar and grind concrete walls. (b) Concrete Modular System, 700 Brady St., on or about August 29, 2019, employees are exposed to an amputation hazard, in that, the employer allowed employees to utilize a Dewalt model DWE4517, 7" portable angle grinder without an guard to cut steel rebar and grind concrete walls.
Recent events (2)
- — I (S) $3000
- — Z (S) $5398
1904.39 A02
- Issued
- Feb 7, 2020
- Abate by
- Mar 5, 2020
- Penalty
- Initial $3,856 · Current $1,507 Reduced
General-duty citation text
29 CFR 1904.39(a)(2): The employer did not report within 24-hours a work-related incident resulting in in-patient hospitalization, amputation or the loss of an eye. (a) Concrete Modular System, 700 Brady St., on or about August 9, 2019, the employer did not report to OSHA the amputation of an employee's finger tip.
Recent events (2)
- — I (O) $1507
- — Z (O) $3856
1910.178 A06
- Issued
- Feb 7, 2020
- Abate by
- Mar 5, 2020
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(a)(6): The employer did not ensure that all nameplates and markings were in place: (a) Concrete Modular System, 700 Brady St., on or about August 29, 2019, Caterpillar diesel forklift did not have nameplates and decals indicating the forklifts specifications, capabilities and limitations.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections in this industry (NAICS 238110)
Jul 17, 2026
Bianchi Concrete and Paving · NAPA, CA
Jul 17, 2026
Limoges Construction, INC. · CORSON, SD
Jul 16, 2026
Brannon Brothers Construction, LLC · MARIANNA, FL
Jul 15, 2026
Icon Building Solutions LLC · NAMPA, ID
Jul 14, 2026
111602 - JMF Construction INC · DULUTH, MN
More inspections in FL
Jul 16, 2026
Ball Fabrics · DELAND, FL
Jul 16, 2026
Wacky Sauces LLC · GAINESVILLE, FL
Jul 16, 2026
Waste Management, INC. of Florida · FORT WALTON BEACH, FL
Jul 16, 2026
Resolute Roofing LLC · PONCE INLET, FL
Jul 16, 2026
J & J Tree Experts, INC. · PALM COAST, FL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344279492.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.