OSHA Inspection: F & L PALLETS, INC.

Issued

Oct 2, 2019

Abate by

Nov 22, 2019

Penalty

Initial $3,789 · Current $3,000 Reduced

General-duty citation text

29 CFR 1910.147(c)(1): The employer did not establish a program consisting of an energy control procedure, employee training and periodic inspections to ensure that before any employee performed any servicing or maintenance on a machine or equipment where the unexpected energizing, startup or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source and rendered inoperative:    (a) Production - On September 4, 2019, the employer did not develop, document and utilize an energy control procedure (lockout/tagout program) and did not provide training on the energy control procedure to ensure that all required elements of the procedure were understood by employees and that the knowledge and skills required for the safe application, usage and removal of the energy controls were acquired by employees performing servicing or maintenance on a machine or an equipment such as changing blades on the chop saws and pallet dismantlers.     In accordance with the requirements of 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete and must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase, or repair of the equipment, photographic or video evidence of abatement, or other written records.

Issued

Oct 2, 2019

Abate by

Oct 15, 2019

Penalty

Initial $5,304 · Current $0 Reduced

General-duty citation text

29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks:    (a) Saw Cutting Department - On September 4, 2019, the employer failed to ensure that adequate methods of guarding were used to protect employees from the exposed portion of the rotating blade on all three chop saws.     (b) Dismantling Department - On September 4, 2019, the employer failed to ensure that adequate methods of guarding were used to protect employees from the exposed portion of the rotating blade on all dismantlers.     In accordance with the requirements of 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete and must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase, or repair of the equipment, photographic or video evidence of abatement, or other written records.

Issued

Oct 2, 2019

Abate by

Oct 29, 2019

Penalty

Initial $4,546 · Current $2,000 Reduced

General-duty citation text

29 CFR 1910.178(l)(1)(i): The employer did not ensure that each powered industrial truck operator is competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l):    (a) Production/ Yard - On September 4, 2019, the employer did not ensure that employees operating forklifts in the facility were competent to do so by the successful completion of forklift training and evaluation.      In accordance with the requirements of 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete and must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase, or repair of the equipment, photographic or video evidence of abatement, or other written records.

Issued

Oct 2, 2019

Abate by

Oct 22, 2019

Penalty

Initial $2,273 · Current $1,000 Reduced

General-duty citation text

29 CFR 1910.219(d)(1): Pulley(s) with part(s) seven feet or less from the floor or work platform were not guarded in accordance with the requirements specified in 29 CFR 1910.219(m) and (o):    (a) Saw Cutting Department  -  On September 4, 2019, the employer, the employer did not ensure that a pulley used to drive the black chop saw was completely guarded.    In accordance with the requirements of 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete and must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase, or repair of the equipment, photographic or video evidence of abatement, or other written records.