ELYRIA, OH —
OSHA Inspection: DIAMOND PRODUCTS, LIMITED
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of DIAMOND PRODUCTS, LIMITED in 333 PROSPECT STREET, ELYRIA, OH 44035 (NAICS 332216). OSHA activity number 344287412.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- DIAMOND PRODUCTS, LIMITED
- Site address
- 333 PROSPECT STREET
- City
- ELYRIA
- State
- OH
- ZIP
- 44035
- Mailing
- 333 PROSPECT STREET, ELYRIA, OH 44035
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332216
- Employees
- 280
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.147 C04 I
- Issued
- Sep 23, 2019
- Abate by
- Oct 2, 2019
- Penalty
- Initial $13,260 · Current $12,000 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section:( A) Diamond Products, Limited, located at 333 Prospect Street, Elyria, OH 44035: On or about July 15, 2019, the employer did not develop and document specific procedures to control hazardous energy of the equipment such as, but not limited to, the Dr. Fritsch Cold Press # 5 (Hydraulic Unit, Type KP 35, Number KP 604) located in the Cold Press Department. Employees did not control all hazardous energy sources such as, but not limited to, electrical and hydraulic before conducting activities such as, but not limited to, changing dies. Employees were exposed to caught-in-between hazards that could result in injuries while all hazardous energy sources were not controlled prior to performing the tasks.
Recent events (3)
- — J (S) $12000
- — C (S) $13260
- — Z (S) $13260
1910.147 D
- Issued
- Sep 23, 2019
- Abate by
- Oct 2, 2019
- Penalty
- Initial $13,260 · Current $0 Reduced
General-duty citation text
29 CFR 1910.147(d): The established procedure for the application of energy control (the lockout or tagout procedures) did not cover the actions listed in and was not done in sequence as required by 29 CFR 1910.147(d)(1)-(6): A) Diamond Products, Limited, located at 333 Prospect Street, Elyria, OH 44035: On or about July 15, 2019, the employer did not ensure that all the steps outlined in 29 CFR 1910.147(d), required for the control of the hazardous energy sources, were performed. Employees did not deenergize the Dr. Fritsch Cold Press # 5 (Hydraulic Unit, Type KP 35, Number KP 604), located in the Cold Press Department, prior to conducting activities such as, but not limited to, changing dies. Employees were exposed to caught-in-between hazards that could result in injuries while all hazardous energy sources were not controlled prior to performing the tasks.
Recent events (3)
- — J (S) $0
- — C (S) $13260
- — Z (S) $13260
1910.147 C07 I A
- Issued
- Sep 23, 2019
- Abate by
- Oct 2, 2019
- Penalty
- Initial $13,260 · Current $2,000 Reduced
General-duty citation text
29 CFR 1910.147(c)(7)(i)(A): Authorized employee(s) did not receive training in the recognition of applicable hazardous energy sources, the type and magnitude of the energy available in the workplace, and the methods and means necessary for energy isolation: A) Diamond Products, Limited, located at 333 Prospect Street, Elyria, OH 44035: On or about July 15, 2019, the employer did not adequately train employees to lockout/tagout equipment such as, but not limited to, the Dr. Fritsch Cold Press # 5 (Hydraulic Unit, Type KP 35, Number KP 604) located in the Cold Press Department. Employees did not control all hazardous energy sources such as, but not limited to, electrical and hydraulic before conducting activities such as, but not limited to, changing dies. Employees were exposed to caught-in-between hazards that could result in injuries while all hazardous energy sources were not controlled prior to conducting work.
Recent events (3)
- — J (S) $2000
- — C (S) $13260
- — Z (S) $13260
1904.39 B07
- Issued
- Sep 23, 2019
- Abate by
- Oct 2, 2019
- Penalty
- Initial $9,472 · Current $3,000 Reduced
General-duty citation text
29 CFR 1904.39(b)(7): If you do not learn about a reportable fatality, in-patient hospitalization, amputation, or loss of an eye at the time it takes place, you must make the report to OSHA within the following time period after the fatality, in-patient hospitalization, amputation, or loss of an eye is reported to you or to any of your agent(s): eight (8) hours for a fatality, and twenty-four (24) hours for an in-patient hospitalization, an amputation, or a loss of an eye. A) Diamond Products, Limited, located at 333 Prospect Street, Elyria, Ohio 44035: On or about July 22, 2019, the employer did not report a personal injury incident as required by OSHA regulations
Recent events (3)
- — J (O) $3000
- — C (O) $9472
- — Z (O) $9472
More inspections at Diamond Products, Limited
View Diamond Products, Limited's full OSHA safety record →
More inspections in this industry (NAICS 332216)
More inspections in OH
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344287412.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.