Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: BEN WRIGHT

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of BEN WRIGHT in 123 VICTOR STREET, WESTVILLE, IL 61883 (NAICS 238160). OSHA activity number 344290937.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch BEN Wright — free Get an email when a new federal OSHA severe-injury report for BEN Wright is published. One employer, no account, unsubscribe in one click.
Establishment
BEN WRIGHT
Site address
123 VICTOR STREET
City
WESTVILLE
State
IL
ZIP
61883
Mailing
107 BENSON, TILTON, IL 61833
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238160
Employees
5
Ownership type
A

7 citations on file for this inspection.

1903.19 C01

Other-than-serious 1 instance 5 exposed
Issued
Dec 10, 2019
Abate by
Jan 17, 2020
Penalty
Initial $319 · Current $319
29 CFR 1903.19(c)(1): The employer did not certify to OSHA, within 10 calendar days after the abatement date, that the cited violation had been abated:  On November 12, 2019, Ben Wright was issued citations and the employer did not verify, through written certification that each citation was abated.
Recent events (1)
  • — Z (O) $319

1926.20 B01

Serious Gravity 5 1 instance 6 exposed
Issued
Nov 12, 2019
Abate by
Nov 21, 2019
Penalty
Initial $2,842 · Current $2,842
29 CFR 1926.20(b)(1): The employer did not initiate and maintain accident prevention programs as necessary to comply with this part:  On or about September 6, 2019, employees were exposed to fall hazards, on a residential construction site in Westville, Illinois.  The employer did not have an effective safety and health program with specific work rules, competent person oversight, and employee training to govern employees activities.
Recent events (1)
  • — Z (S) $2842

1926.20 B02

Serious Gravity 5 1 instance 6 exposed
Issued
Nov 12, 2019
Abate by
Nov 21, 2019
Penalty
Initial $0 · Current $0
29 CFR 1926.20(b)(2): The employer did not initiate and maintain programs which provided for frequent and regular inspections of the job site, materials and equipment to be made by a competent person(s):  On or about September 6, 2019, employees were exposed to fall hazards, on a residential construction site in Westville, Illinois.  The employer did not have a competent person at the construction site conducting frequent and periodic safety inspections.
Recent events (1)
  • — Z (S) $0

1926.501 B13

Serious Gravity 10 1 instance 6 exposed
Issued
Nov 12, 2019
Abate by
Nov 21, 2019
Penalty
Initial $3,978 · Current $3,978
29 CFR 1926.501(b)(13): Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501 (b):     On or about September 6, 2019, employees were exposed to fall hazards of 10 feet without fall protection, on a residential construction site in Westville, Illinois.
Recent events (1)
  • — Z (S) $3978

1926.503 A01

Serious Gravity 10 1 instance 6 exposed
Issued
Nov 12, 2019
Abate by
Nov 21, 2019
Penalty
Initial $0 · Current $0
29 CFR 1926.503(a)(1): The employer did not provide a training program for each employee potentially exposed to fall hazards to enable each employee to recognize the hazards of falling and the procedures to be followed in order to minimize these hazards:   On or about September 6, 2019, employees were exposed to fall hazards of 10 feet without fall protection, on a residential construction site in Westville, Illinois. The employer did not provide construction safety training to employees, in order to provide them with the knowledge necessary to recognize the hazards of falling and the safety requirements associated with fall protection, as well as the proper work procedures to follow, in order to minimize and eliminate the fall hazards.
Recent events (1)
  • — Z (S) $0

1926.1053 B01

Serious Gravity 5 1 instance 1 exposed
Issued
Nov 12, 2019
Abate by
Nov 21, 2019
Penalty
Initial $2,842 · Current $2,842
29 CFR 1926.1053(b)(1): Portable ladders were used for access to an upper landing surface and the ladder side rails did not extend at least 3 feet (.9 m) above the upper landing surface to which the ladder was used to gain access:      On or about September 6, 2019, an employee was exposed to fall hazards of 10 feet, while accessing and exiting the roof via an extension ladder that only extended 1.5 feet above the upper landing surface of the roof, on a residential construction site in Westville, Illinois.
Recent events (1)
  • — Z (S) $2842

1926.1060 A

Serious Gravity 5 1 instance 1 exposed
Issued
Nov 12, 2019
Abate by
Nov 21, 2019
Penalty
Initial $0 · Current $0
29 CFR 1926.1060(a): The employer did not provide a training program for each employee using ladders and stairways, as necessary, which would train each employee in the procedures to be followed to minimize hazards related to ladders and stairways:       On or about September 6, 2019, an employee was exposed to fall hazards of 10 feet, while accessing and exiting the roof via an extension ladder that only extended 1.5 feet above the upper landing surface of the roof, on a residential construction site in Westville, Illinois.  The employer did not provide construction safety training to the employee, in order to provide them with the knowledge necessary to recognize the hazards related to ladders, as well as the proper work procedures to follow, in order to minimize and eliminate these hazards.  This training would include:    a.         The nature of fall hazards in the work area,  b.         The correct procedures for erecting, maintaining, and disassembling the fall protection systems to be used, c.         The proper construction use, placement, and care in handling of all ladders, d.         The maximum intended load carrying capacities of ladders, and  e.         The standards contained in this subpart, Subpart X  Stairways and Ladders.
Recent events (1)
  • — Z (S) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344290937.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.