SAINT LOUIS, MO —
OSHA Inspection: PAULO PRODUCTS COMPANY
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of PAULO PRODUCTS COMPANY in 5711 WEST PARK AVENUE, SAINT LOUIS, MO 63110 (NAICS 332811). OSHA activity number 344306303.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- PAULO PRODUCTS COMPANY
- Site address
- 5711 WEST PARK AVENUE
- City
- SAINT LOUIS
- State
- MO
- ZIP
- 63110
- Mailing
- 5711 WEST PARK AVENUE, SAINT LOUIS, MO 63110
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332811
- Employees
- 71
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.28 B03 II
- Issued
- Dec 9, 2019
- Penalty
- Initial $5,683 · Current $0 Reduced
General-duty citation text
29 CFR 1910.28(b)(3)(ii): The employer did not ensure each employee is protected from tripping into or stepping into or through any hole that is less than 4 feet (1.2 m) above a lower level by covers or guardrail systems: At 5711 West Park Ave in St. Louis, MO 63110 (Black Oxide Area) - On or about 09/13/2019, employees were exposed to tripping hazards while walking / working near a floor hole (approximately 3-inches by 3-inches) and the employer did not ensure each employee was protected from tripping into or stepping into or through the hole that was less than 4 feet (1.2 m) above a lower level by covers or guardrail systems.
Recent events (2)
- — I (O) $0
- — Z (S) $5683
1910.178 P01
- Issued
- Dec 9, 2019
- Penalty
- Initial $13,260 · Current $0 Reduced
General-duty citation text
29 CFR 1910.178(p)(1): Powered industrial truck(s) found to be in need of repair, defective, or in any way unsafe had not been taken out of service until restored to safe operating condition: (a) At 5711 West Park Ave in St. Louis, MO 63110 - On or about 09/13/2019, employees were exposed to struck-by or struck-against hazards while operating a "Toyota" (Model No. 7FBCU25, Serial No. 67905, Type E) powered industrial truck that was missing a slip-resistant covering on the brake pedal and had not been taken out of service until restored to safe operating condition. (b) At 5711 West Park Ave in St. Louis, MO 63110 - On or about 09/13/2019, employees were exposed to struck-by or struck-against hazards while operating a "Toyota" (Model No. 7FBCU25, Serial No. 67090, Type E) powered industrial truck that was missing a slip-resistant covering on the brake pedal and had not been taken out of service until restored to safe operating condition. (c) At 5711 West Park Ave in St. Louis, MO 63110 - On or about 09/13/2019, employees were exposed to struck-by or struck-against hazards while operating a "Toyota" (Model No. 7FBCU25, Serial No. 71626, Type E) powered industrial truck that was missing a slip-resistant covering on the brake pedal and had not been taken out of service until restored to safe operating condition. (d) At 5711 West Park Ave in St. Louis, MO 63110 - On or about 09/13/2019, employees were exposed to struck-by or struck-against hazards while operating a "Toyota" (Model No. SFGCU32, Serial No. 14792, Type LP) powered industrial truck that was missing a slip-resistant covering on the clutch pedal and had not been taken out of service until restored to safe operating condition. (e) At 5711 West Park Ave in St. Louis, MO 63110 - On or about 09/13/2019, employees were exposed to struck-by or struck-against hazards while operating a "Toyota" (Model No. 7FBCU25, Serial No. 71888, Type E) powered industrial truck that was missing a slip-resistant covering on the brake pedal and had not been taken out of service until restored to safe operating condition.
Recent events (2)
- — I (O) $0
- — Z (S) $13260
1910.178 Q01
- Issued
- Dec 9, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(q)(1): Any power-operated industrial truck not in safe operating condition was not taken out of service, and/or repairs were not made by authorized personnel: (a) At 5711 West Park Ave in St. Louis, MO 63110 - On or about 09/13/2019, employees were exposed to struck-by or struck-against hazards while operating a "Toyota" (Model No. 7FBCU25, Serial No. 67905, Type E) powered industrial truck that was missing a slip-resistant covering on the brake pedal and was not taken out of service, and/or repairs were not made by authorized personnel. (b) At 5711 West Park Ave in St. Louis, MO 63110 - On or about 09/13/2019, employees were exposed to struck-by or struck-against hazards while operating a "Toyota" (Model No. 7FBCU25, Serial No. 67090, Type E) powered industrial truck that was missing a slip-resistant covering on the brake pedal and was not taken out of service, and/or repairs were not made by authorized personnel. (c) At 5711 West Park Ave in St. Louis, MO 63110 - On or about 09/13/2019, employees were exposed to struck-by or struck-against hazards while operating a "Toyota" (Model No. 7FBCU25, Serial No. 71626, Type E) powered industrial truck that was missing a slip-resistant covering on the brake pedal and was not taken out of service, and/or repairs were not made by authorized personnel. (d) At 5711 West Park Ave in St. Louis, MO 63110 - On or about 09/13/2019, employees were exposed to struck-by or struck-against hazards while operating a "Toyota" (Model No. SFGCU32, Serial No. 14792, Type LP) powered industrial truck that was missing a slip-resistant covering on the clutch pedal and was not taken out of service, and/or repairs were not made by authorized personnel. (e) At 5711 West Park Ave in St. Louis, MO 63110 - On or about 09/13/2019, employees were exposed to struck-by or struck-against hazards while operating a "Toyota" (Model No. 7FBCU25, Serial No. 71888, Type E) powered industrial truck that was missing a slip-resistant covering on the brake pedal and was not taken out of service, and/or repairs were not made by authorized personnel.
Recent events (2)
- — I (O) $0
- — Z (S) $0
1910.219 C04 I
- Issued
- Dec 9, 2019
- Penalty
- Initial $7,577 · Current $7,577
General-duty citation text
29 CFR 1910.219(c)(4)(i): Unguarded projecting shaft end(s) did not present a smooth edge and end and projected more than one half the diameter of the shaft: At 5711 West Park Ave in St. Louis, MO 63110 - On or about 09/13/2019, employees were exposed to the hazard of being caught in the ingoing nip point of an unguarded rotating shaft (approximately 1-inch diameter shaft projecting 1.5 inches) and the oil lever on the "503 Oiler" machine, where the projecting shaft end projected more than one half the diameter of the shaft.
Recent events (2)
- — I (S) $7577
- — Z (S) $7577
More inspections at Paulo Products Company
View Paulo Products Company's full OSHA safety record →
More inspections in this industry (NAICS 332811)
More inspections in MO
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344306303.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.