Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: BASTO FRAMING, LLC.

Unprogrammed Related inspection · Safety discipline

On , OSHA opened an unprogrammed Related safety inspection of BASTO FRAMING, LLC. in 4079 LYMAN DRIVE, HILLIARD, OH 43026 (NAICS 238130). OSHA activity number 344309851.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Basto Framing, LLC. — free Get an email when a new federal OSHA severe-injury report for Basto Framing, LLC. is published. One employer, no account, unsubscribe in one click.
Establishment
BASTO FRAMING, LLC.
Site address
4079 LYMAN DRIVE
City
HILLIARD
State
OH
ZIP
43026
Mailing
4023 SOUTH SHACKLEFORD ROAD, LITTLE ROCK, AR 72204
Inspection type
Unprogrammed Related (G)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238130
Employees
4
Ownership type
A

3 citations on file for this inspection.

1926.502 I02

Serious Gravity 10 2 instances 5 exposed
Issued
Jan 15, 2020
Abate by
Jan 28, 2020
Penalty
Initial $3,978 · Current $3,978
1926.502(i) Covers. Covers for holes in floors, roofs, and other walking/working surfaces shall meet the following requirements:  29 CFR 1926.502(i)(2): All other covers shall be capable of supporting, without failure, at least twice the weight of employees, equipment, and materials that may be imposed on the cover at any one time.  a. On or about September 9, 2019, located on a temporary platform at the 4th floor elevator shaft, the employer did not ensure that contractor employees were protected from falls through two floor holes on the left and right ends of the platform by ensuring that floor hole covers were capable of supporting, without failure, at least twice the weight of employees, thereby exposing contractor employees to a fall hazard of approximately 40 feet.  b. On or about September 11, 2019, located on a temporary platform at the 4th floor elevator shaft, the employer did not ensure that contractor employees were protected from falls through two floor holes on the left and right ends of the platform by ensuring that floor hole covers were capable of supporting, without failure, at least twice the weight of employees, thereby exposing contractor employees to a fall hazard of approximately 40 feet.   On September 11, 2019, contractor employees were working from a temporary platform located in an elevator shaft. An employee stepped onto an unsupported, unsecured and unmarked floor hole cover on the left end of the platform which caused the employee to fall approximately 40 feet resulting in death.
Recent events (1)
  • — Z (S) $3978

1926.502 I03

Serious Gravity 10 2 instances 5 exposed
Issued
Jan 15, 2020
Abate by
Jan 28, 2020
Penalty
Initial $0 · Current $0
29 CFR 1926.502(i)(3): All covers shall be secured when installed so as to prevent accidental displacement by the wind, equipment, or employees.   a. On or about September 9, 2019, located on a temporary platform at the 4th floor elevator shaft, the employer did not ensure that contractor employees were protected from falls through two floor holes on the left and right ends of the platform by ensuring that floor hole covers were secured to prevent accidental displacement, thereby exposing contractor employees to a fall hazard of approximately 40 feet.  b. On or about September 11, 2019, located on a temporary platform at the 4th floor elevator shaft, the employer did not ensure that contractor employees were protected from falls through two floor holes on the left and right ends of the platform by ensuring that floor hole covers were secured to prevent accidental displacement, thereby exposing contractor employees to a fall hazard of approximately 40 feet.   On September 11, 2019, contractor employees were working from a temporary platform located in an elevator shaft. An employee stepped onto an unsupported, unsecured and unmarked floor hole cover on the left end of the platform which caused the employee to fall approximately 40 feet resulting in death.
Recent events (1)
  • — Z (S) $0

1926.502 I04

Serious Gravity 10 2 instances 5 exposed
Issued
Jan 15, 2020
Abate by
Jan 28, 2020
Penalty
Initial $0 · Current $0
29 CFR 1926.502(i)(4): All covers shall be color coded or they shall be marked with the word "HOLE" or "COVER" to provide warning of the hazard.  a. On or about September 9, 2019, located on a temporary platform at the 4th floor elevator shaft, the employer did not ensure that contractor employees were protected from falls through three floor holes on the left and right ends and center of the platform by ensuring that floor hole covers were color coded or marked with the word HOLE or COVER, thereby exposing contractor employees to a fall hazard of approximately 40 feet.   b. On or about September 11, 2019, located on a temporary platform at the 4th floor elevator shaft, the employer did not ensure that contractor employees were protected from falls through three floor holes on the left and right ends and center of the platform by ensuring that floor hole covers were color coded or marked with the word HOLE or COVER, thereby exposing contractor employees to a fall hazard of approximately 40 feet.   On September 11, 2019, contractor employees were working from a temporary platform located in an elevator shaft. An employee stepped onto an unsupported, unsecured and unmarked floor hole cover on the left end of the platform which caused the employee to fall approximately 40 feet resulting in death.
Recent events (1)
  • — Z (S) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344309851.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.