LAFAYETTE, LA —
OSHA Inspection: NOLAN'S MACHINE SHOP, INC
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of NOLAN'S MACHINE SHOP, INC in 1627 JEFFERSON ST, LAFAYETTE, LA 70501 (NAICS 332710). OSHA activity number 344319330.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- NOLAN'S MACHINE SHOP, INC
- Site address
- 1627 JEFFERSON ST
- City
- LAFAYETTE
- State
- LA
- ZIP
- 70501
- Mailing
- 1627 JEFFERSON ST, LAFAYETTE, LA 70501
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332710
- Employees
- 12
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.147 C06 I
- Issued
- Dec 20, 2019
- Abate by
- Jan 6, 2020
- Penalty
- Initial $5,834 · Current $2,917 Reduced
General-duty citation text
29 CFR 1910.147(c)(6)(i): The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirement of this standard were being followed. On or about September 18, 2019 in the machine shop employees conducted lockout/tag out procedures to equipment that was not inspected periodically for energy control procedures.
Recent events (2)
- — I (S) $2917
- — Z (S) $5834
1910.178 L02 II
- Issued
- Dec 20, 2019
- Abate by
- Jan 6, 2020
- Penalty
- Initial $5,001 · Current $0 Reduced
General-duty citation text
29 CFR 1910.178(l)(2)(ii): The employer did not ensure that each operator had successfully completed the training consisting of a combination of formal instruction (e.g., lecture, discussion, interactive computer learning, video tape, written material), practical training (demonstrations performed by the trainer and practical exercises performed by the trainee), and evaluation of the operator's performance in the workplace. On or about September 18, 2019 in the machine shop employees who operated forklifts were not provided with practical training.. The employer shows employees slides and gives a written test.
Recent events (2)
- — I (S) $0
- — Z (S) $5001
1910.179 L03 I
- Issued
- Dec 20, 2019
- Abate by
- Jan 6, 2020
- Penalty
- Initial $5,834 · Current $1,000 Reduced
General-duty citation text
29 CFR 1910.179(l)(3)(i): Unsafe condition(s) disclosed during the frequent or periodic inspection(s) required by 29 CFR 1910.179(j) were not corrected before operation of the crane(s) was resumed. On or about September 18, 2019 in the machine shop employees used a 2-Ton Overhead Crane that was not repaired after an unsafe condition was recognized during a periodic inspection.
Recent events (2)
- — I (S) $1000
- — Z (S) $5834
1910.212 A03 II
- Issued
- Dec 20, 2019
- Abate by
- Jan 6, 2020
- Penalty
- Initial $3,334 · Current $1,667 Reduced
General-duty citation text
29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s): On or about September 18, 2019 in the machine shop employees used a LaGun Drill Press FTV-2S that did not have a guard. The employee was milling a 3/16 key slot.
Recent events (2)
- — I (S) $1667
- — Z (S) $3334
1904.32 A03
- Issued
- Dec 20, 2019
- Abate by
- Jan 6, 2020
- Penalty
- Initial $834 · Current $0 Reduced
General-duty citation text
29 CFR 1904.32(a)(3): The employer did not certify an OSHA 300A Form or equivalent. On or about September 18, 2019 at Nolan's Machine Shop the OSHA 300A Form was not certified for the year 2018.
Recent events (2)
- — I (O) $0
- — Z (O) $834
1910.1200 E01 I
- Issued
- Dec 20, 2019
- Abate by
- Jan 6, 2020
- Penalty
- Initial $468 · Current $0 Reduced
General-duty citation text
29 CFR 1910.1200(e)(1)(i): The employer did not compile a list of the hazardous chemicals known to be present using a product identifier that was referenced on the appropriate safety data sheet. On or about September 18, 2019 at Nolan's Machine Shop a list of hazardous chemicals was not compiled and placed with the Safety Data Sheets.
Recent events (2)
- — I (O) $0
- — Z (O) $468
More inspections at Nolan'S Machine Shop, INC
View Nolan'S Machine Shop, INC's full OSHA safety record →
More inspections in this industry (NAICS 332710)
More inspections in LA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344319330.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.